RAMMon v1.0 Build: 1007 built with SysInfo v1.0 Build: 1028
PassMark (R) Software - www.passmark.com

Memory Summary For TOOMY-PC
Number of Memory Devices: 2	Total Physical Memory: 4095 MB (4096 MB)
				Total Available Physical Memory: 2759 MB
				Memory Load: 32%
ItemSlot #1Slot #2Slot #3Slot #4
Ram Type DDR3 Not Populated DDR3 Not Populated
Standard Name DDR3-1333 DDR3-1333
Module Name PC3-10600 PC3-10600
Memory Capacity (MB) 2048 2048
Bus Clockspeed (Mhz) 666.67 666.67
Jedec Manufacture Name Apacer Technology Apacer Technology
Search Amazon.com Search! Search!
SPD Revision 1.0 1.0
Registered No No
ECC No No
DIMM Slot # 1 3
Manufactured Year 0 Year 0
Module Part # 78.AAGD0.9KD˙˙˙˙˙˙ 78.AAGD0.9KD˙˙˙˙˙˙
Module Revision 0x0 0x0
Module Serial # 0x2010261 0x2010261
Module Manufacturing Location 0 0
# of Row Addressing Bits 14 14
# of Column Addressing Bits 10 10
# of Banks 8 8
# of Ranks 2 2
Device Width in Bits 8 8
Bus Width in Bits 64 64
Module Voltage 1.5V 1.5V
CAS Latencies Supported 6 7 8 9 6 7 8 9
Timings @ Max Frequency 9-9-9-24 9-9-9-24
Minimum Clock Cycle Time, tCK (ns) 1.500 1.500
Minimum CAS Latency Time, tAA (ns) 13.500 13.500
Minimum RAS to CAS Delay, tRCD (ns) 13.500 13.500
Minimum Row Precharge Time, tRP (ns) 13.500 13.500
Minimum Active to Precharge Time, tRAS (ns) 36.000 36.000
Minimum Row Active to Row Active Delay, tRRD (ns) 6.000 6.000
Minimum Auto-Refresh to Active/Auto-Refresh Time, tRC (ns) 49.500 49.500
Minimum Auto-Refresh to Active/Auto-Refresh Command Period, tRFC (ns) 110.000 110.000
DDR3 Specific SPD Attributes
Write Recovery Time, tWR (ns) 15.000 15.000
Internal Write to Read Command Delay, tWTR (ns) 7.500 7.500
Internal Read to Precharge Command Delay, tRTP (ns) 7.500 7.500
Minimum Four Activate Window Delay, tFAW (ns) 30.000 30.000
RZQ / 6 Supported Yes Yes
RZQ / 7 Supported Yes Yes
DLL-Off Mode Supported Yes Yes
Maximum Operating Temperature (C) 95 95
Refresh Rate at Extended Operating Temperature Range 1X 1X
Auto-self Refresh Supported Yes Yes
On-die Thermal Sensor Readout Supported No No
Partial Array Self Refresh Supported Yes Yes
Thermal Sensor Present No No
Non-standard SDRAM Type Standard Monolithic Standard Monolithic
Module Type UDIMM UDIMM
Module Height (mm) 30 30
Module Thickness (front), (mm) 2 2
Module Thickness (back), (mm) 2 2
Module Width (mm) 133.5 133.5
Reference Raw Card Used Raw Card B Rev. 0 Raw Card B Rev. 0
DRAM Manufacture ID 0 0
# of DRAM Rows 0 0
# of Registers 0 0
Register Manufacturer
Register Type
Register Revision 0 0
XMP Attributes
XMP Revision 1.0 1.0
Enthusiast / Certified Profile
Module voltage 1.65V 1.65V
Clock speed (Mhz) 800.00 800.00
Minimum clock cycle time, tCK (ns) 1.250 1.250
Supported CAS latencies 6 9 6 9
Minimum CAS latency time, tAA (ns) 11.250 11.250
Minimum RAS to CAS delay time, tRCD (ns) 11.250 11.250
Minimum row precharge time, tRP (ns) 11.250 11.250
Minimum active to precharge time, tRAS (ns) 33.750 33.750
Supported timing at highest clock speed 9-9-9-27 9-9-9-27
Minimum Row Active to Row Active Delay, tRRD (ns) 6.000 6.000
Minimum Active to Auto-Refresh Delay, tRC (ns) 46.250 46.250
Minimum Recovery Delay, tRFC (ns) 110.000 110.000
Minimum Write Recovery time, tWR (ns) 15.000 15.000
Minimum Write to Read CMD Delay, tWTR (ns) 7.500 7.500
Minimum Read to Pre-charge CMD Delay, tRTP (ns) 7.500 7.500
Minimum Four Activate Window Delay, tFAW (ns) 30.000 30.000
Maximum Average Periodic Refresh Interval, tREFI (us) 7.875 7.875
Write to Read CMD Turn-around Time Optimizations 3 Clock Push-out 3 Clock Push-out
Read to Write CMD Turn-around Time Optimizations No adjustment No adjustment
Back 2 Back CMD Turn-around Time Optimizations 2 Clock Push-out 2 Clock Push-out
System CMD Rate Mode 2T 2T