Ok, well i setup driver verifier as requested last night and within 30sec of the first reboot i got a BSoD referencing a particular driver. On the very next reboot after 5min i got another BSoD. This time no driver was listed. I turned system off for the night and when i got home this...
DRAM voltage is currently set to 1.65v VCCIO is currently set to 1.335v For some reason CPUID displays the RAM voltage as 1.5v regardless of what the actual value is set to in BIOS. Weird. I will run tests mentioned above and post results tomorrow night. Thanks
Well, Memtest passes all tests without errors both single stick and two sticks at a time. Bumping up the VCCIO to 1.250v provided more stability but only for 24 hours before another BSoD. This was the longest that the system has ever been up for. I have subsequently tried 1.300v and currently at...
Hi there, well I ran memtest all weekend long. I tested one stick in all 4 slots before swapping sticks and testing again. Each test was for a minimum of 6hrs. Cache was turned on as when i had it selected as "off" the test just sat at 0% and the progress bar did not seem to move. I left it for...
Yeah I already have a bootable disc with this on it. Will run the test when I get home this afternoon. Can you specify the settings i need to run it with though? I think from memory the test would not run when i had the cache setting enabled. It would just sit there and the % bar would not...
nmsuk, yes the bios has been upgraded to 1003. Was there anything in my BIOS screenshots that stood out to you as being a potential issue? Where do I go from here?
Hi Guys, Well graphics card is back in. PC performed cold boot ok but predictably crashed once in windows. DRAM voltage is now set to 1.65v. Primary memory timings in BIOS are now 9-9-9-20-2 as per manufacturer spec. They had been at 9-9-9-24-2. To answer your question NMSUK, no it does not...
Well the computer had been turned off all day while i was at work and when i tried to boot tonight the pc started up but the display remained blank. I couldn't get it to power the display. Eventually i started getting halfway through the boot process before it would crash or freeze. This...
Hi guys, hopefully someone can help me with this as it is starting to drive me crazy I have built a new system and components are as follows: Core i3 2120 Asus P8H67-m-pro B3 revision OCZ3G1333LV4GK ram (2 x 2gb sticks DDR3 dual channel) Samsung 1TB HDD CoolerMaster case with...