Recent content by ghost_301

Alright, as mentioned, this is a strange problem for me. Previously I had the settings in both host and client setup and both work very well; client PC get internet connection whenever the host PC connected. However, it no longer get the internet connection from host PC, after a few days of...

I am pretty confident that the change of GC won't cause any problem at all if you manage to make the system up and run after u changed mobo and proc. Don't worry just go ahead. Just remember to use any driver cleaner in case you don't want any driver conflict.

Absolutely nothing except backup the important files in case it failed. Once I changed everything, the windows boot up normally but it will say something has changed and it will repair on next boot. After that everything just goes on as normal. However, please be advised that I am not guarantee...

As title. I have two computers which is connected with cross over cable. Before I activate ICS to share internet connection, I managed to make two computers in a homegroup where they can share files and printer etc. After that, I bridged my 2 LAN cards, and activate the ICS. In my bridges LAN...

Thanks for all the replies. Ya, I had made the cable and it works like charm ... Thanks again !

Workable driver ? Hi Bud_h81, does that mean you successfully installed the device driver ? I am using W7 64 bit and I can't seems to able to install the driver for the same device. If I installed forcefully by own choice driver, it states that the device cannot start. :frown:

I got a Canon Printer which have no Vista support from official site which I wish to use it in W7. I know it's an old AIO printer but sometimes the scanner comes in handy, but problem is I only get hold of XP driver for it. I tried installed the Virtual XP mode beta and I try to setup my...

Try to boot with one stick of RAM first, then only try all. Perhaps RAM is not functioning well. If it gives you the reading of 4GB previously in XP or Vista(x64), it should be the same in Windows 7.

I wanted to do a p2p connection to my sister pc in the other room which is around 10m just using the cross cable without using hub ... Is this length gonna cause a lot of problem because I heard that if it's longer than 5m then the packet loss will be a lot ... Anyone ?

Just a quick update. So far so good. I changed the proc, mobo and add in ram ... First time boot it detects problem and solved it ... Second boot manage to go in and start installing all drivers ... After that everything back to normal AGAIN ! Just cool without needed to format again ... Thanks...

How about a repair installation ? Is windows 7 provide this repairing like in XP ? Bcos I am gonna change to new mobo and CPU as well ...

Thanks for the help, I read this before as well. But it's not the problem I am facing as I don't have a Unidentified network there, plus in my services list, the string mentioned doesn't exist, so I guess it's not the problem I ran into.

I am currently using 7137 x64, and I am aware of the unsave username and password for ADSL dialer. Recently I think my ISP connection is rather unstable due to their maintenance exercise, so it have quite a number of disconnection. But I have one problem is that I couldn't completely disconnect...

Really weird, when selecting Devices and Printers (Device Stage) in the menu the progress bar would take forever and never display anything - just blank. Finally discovered it was actually a bluetooth issue in services. I don't even know why I looked there - - THE FIX at least for me...

Really weird, when selecting Devices and Printers (Device Stage) in the menu the progress bar would take forever and never display anything - just blank. Finally discovered it was actually a bluetooth issue in services. I don't even know why I looked there - - THE FIX at least for me...