Recent content by iNarek94

Hello friendly users, just a small update for anyone who could be having the same issue :) In the end it turned out to be a faulty RAM stick. After some time I started receiving BSOD again and retook the memtest. One of the sticks quickly reached a few 100K errors in just a second, so I...

Going well after a week.

The list on the webpage contains RAMs that were tested, not all compatible models, so I am not sure if there is any compatibility issue. All in all, I haven't got this issues today, after I did the following steps, which summarize most suggestions I have received before. Reconfirmed GPU's power...

I still have my old rig parts, so I can rebuild it and run some tests.

Ok, as you stated, I have found other topics where people with R series are having either high clock or low voltage problems, which sounds logical, only, in my case I have been getting crashes like that during casual web browsing too, gpu's clock was at 600MHz, so these two facts don't really...

by 100MHz, and, unfortunately, another crash happened now, so the problem isn't solved yet, but I will keep monitoring different clock values. The thing is, I have been using this gpu for 1.5 years, always running at stock clocks and never had issues, but at that time I had AMD A10 5800K cpu...

I haven't ever touched RAM's part since getting it, because bios showed RAM running at it's nominal 2133MHz speed, it appears that cpu_z and other programs show half the speed (double data rate, in my case 2133/2 ~= 1066) and I didn't know that. I have just reinstalled AMD's drivers, played with...

I downclocked core from 1050MHz to 950 and I used Overdrive first and then, after uninstalling amd's software I used Afterburner. I have just checked my memory clocks through HWInfo and CPU_Z, I don't know why, but they are running at 1066MHz 15-15-15-36 (Is this because it displays...

I don't think Corsair is not a quality brand, also, if PSU was the case, I should have at least noticed it while doing a 1 hour stress test with a 100% gpu load, nevertheless I attached 2 screenshots of voltages. To be honest, I am more biased towards searching for the problem in memory timings.

Not really, I just ran the uninstaller and chose to remove software only, leaving the drivers installed. I would love to upload the dump file, but I have already installed windows 8.1 again, and as windows automatically downloaded and installed a 2014 version driver and software from radeon, I...

Hi, I am using stock cooler, and, as you suggested, I improved my cable management and relocated one of the case fans near the gpu, now the temps are lower, running furmark with a closed case and 90% gpu fan use at around 85C. However, when I tried to change core clock in radeon settings, my...

Thank you for replying, kemical, I have done the steps you mentioned, used DDU in safe mod, uninstalled AMD drivers and CCC, then manually removed AMD folder and after restarting reinstalled the latest drivers. After that I ran a stress test on 1080p, MSAA x2 settings for 1 hour with 100% gpu...

Hello, Recently (a week ago) I have changed my motherboard, cpu and ram. At this moment I have the current configuration Corsair 550W PSU ASRock H170 Pro 4 Intel Core i5 6500 XFX R9 270X 4GB 2x4GB Corsair Vengeance DDR4 2133MHZ 120GB SSD Kingston V300 1TB WD HDD After struggling with drivers...