Recent content by lonepalm

Here is what I did with that memtest. I did the test with a number of passes without changing anything at all with the RAM. Then, I scanned again after swapping the slots the sticks were in (stick 1 was in slot 1, then was moved to slot 2, while stick 2 was in slot 2, then moved to slot 1. Is...

Sorry for the delay. I have an email into my motherboard manufacturer and I am waiting for a reply. I cannot understand how all these sticks of RAM are getting corrupted (if that truly is the case). Maybe the motherboard slots are bad? Once I get an email back from them either confirming or...

Ok, tried to set the BIOS to optimized settings, and Windows wouldn't start. As soon as the Starting Windows screen went off, I got a BSOD that said IRQ_NOT_LESS_OR_EQUAL. This happened a couple times. Sometimes it also never went off of the Starting Windows screen. At this point, I loaded the...

I have set it to optimized before and I have saved it. Since the new RAM was put in at the shop, I am not sure if that has been done. I will go ahead and do that now. Any other suggestions before placing the new RAM in? I pretty much put it in the slots and start up? Like I said, I just want to...

Ok, thanks. I have replacement RAM from my previous failed RAM that I will put in and see if that works. The RAM that is in there is brand new, which I got after the original RAM was diagnosed to have failed, so it's weird that this RAM is failing now too, but I will replace. Is there anything I...

Driver Verifier enabled. Downloaded the Furmark test, but need some advice on what is needed to run and what would help you diagnose it. Could it possibly be the motherboard? Maybe the memory slots in the motherboard are somehow damaged? I switched the two sticks in the slots and ran the...

BSOD this morning. Latest zip file attached. This was a SYSTEM_SERVICE_EXCEPTION.

Ok, the memtest had 9 passes and found NO errors. anodlwfx.sys has been renamed anodlwfx.BAK. When I boot up tomorrow morning, I'll have the chance to see if I still get the BSOD. Thanks everyone for the help you have given me thus far!

Here are the results from speedfan: GPU : 129F Temp1: 100F Temp2: 95F Temp3: 99F Core: 99F I will start the memtest now and post when it finishes. Advanced System Care uninstalled. Here are the latest BSOD files.

Another BSOD this morning. It is the first attachment. The second is the result of the S.M.A.R.T. scan on the C drive.

Forgive me if this is a really dumb question, but exactly what do you want me to do with the HDDScan? Verify? Read? Erase? Butterfly? S.M.A.R.T.?

Startup this morning, got a System_Service_Exception. Attached is the next batch of files.

Ok, test completed. I did not see anything that looked like there was a problem. Is there some report or file I can post so that can be verified?

I ran these all last night. I will do it again now. It takes a while to go through, so I will probably have a reply tomorrow. Thanks!

Ok, first startup today...internet connection did not start right away, which is odd. Eventually, a BSOD appeared, but had no error "code" associated with it. Attached is the next set of files. Webcam uninstalled and drivers removed. Scanned with Malwarebytes and removed two files. Did the...