Recent content by miniclip22

Hi all, thanks one more time for your extended support though time. Well, I found out the source of the problem- missing RAM. I have complained to the store where I have bought my PC, and they agreed to replace the missing RAM. My problem (I thought it would be fixed) persists. I have tried...

Anyone there?

Thanks for replying, Mike. I have tested the RAM Modules, and the computer could boot perfectly. I only tried 4 times, though. Why do I need to try 16 times? And how can I determine which is the faulty RAM module, or which part of it? Thanks in advance! :D

Drew, once again, thanks for replying. I am totally sorry, but I did not understand a word you have told me. Could you please explain a little better? Sorry to bother you like this, and thanks in advance!!! :D

Hi there, thanks a lot for replying :D. I have run the cpu-z program, and it appears to be a damaged RAM Module. Here are the screens:

Ok, all do that in 1 hour or 2, as I've got work to do. Thanks a lot :D

Thanks for replying. Yes, I have made sure that I had my BIOS updated. Drew, you didn't miss anything, as the whole site was down for a day or two. No, I still have the same problem, even with 2x2GB, even after removing them and placing back together. I do not know what to do next. I've heard...

Well Drewm you were right! It was after all a loose RAM module, and I have video signal now. Thanks a lot! Yes, it as a loose RAM module. It was not fully attached. I have fixed that problem, but the 3GB, not 4 GB problem still presists. Any help would be perfect :D.

The outputs and the inputs seem to be fine. I think you are right, the ram module is not fully atatched, and I do not seem to know how. I would be glad if you could help me. Thanks in advance!

I don't know, I might have removed when I was reseting the bios. Why do you say it's a loose ram module? I can say it boots to windows, because the Led starts flashing, and when I am on windows, it only shutsdowns manually after 4 seconds. What exactly do you mean by loose ram module? Couldn't...

No, it goes black all the time with no video imput. I just can tell it boots into windows because it takes 4 seconds to shut down.

Thanks for replying. Yes, there is hard drive activity, the pc boots into windows succesfully. No, there are no beeps whatsoever, it is a normal boot apart the monitor. How do I fix this?

I boot the machine, everything is normal, like nothing happened. I boot the machine, and the monitor is black, saying 'warning: no video input'. Why is this happening? Thanks in advance.

yes, 2x2gb ram. Please help me with no video input...

Now I have also a very serious problem. As I was checking the ram chips, the next time I boot the pc I have no video input. I do not know why there is no video input, as I have tried EVERYTHING, from removing and putting back in the Ram chips, from checking my video card and removing the 3v...