Recent content by Saaaaaad

Alright, so since updating the BIOS, i've used the computer relatively long periods of time without a crash. It seems as though that was the issue, and its been running perfect so far. Thank you very much for the advice.

I've run memtest86 with no errors. I'll try updating the BIOS as you've said and report back. Thanks.

Hi all, I'm having issues with a fresh Windows 10 install on a brand new system. Most of the erros are "Memory_Management" errors, but also some "IRQL_NOT_LESS_THAN_EQUAL" and PAGE_FAULT_NONPAGED_AREA" BSODs Here are the DMP files...

Yah, I wasn't really disregarding his advice. More like wishful thinking on my part, hoping I wouldn't have to get new RAM...

Thanks to both Cybercore and Elmer. I'll try updating that driver. But seeing as memory corruption comes up again, I might have to replace my RAM after all...

Hi again, Seems like the BSOD's are back. I have yet to change the RAM, but it doesn't seem like the cause to me. My PC fails to load windows, and then asks to run the Windows Repair tool, I let it run. Afterwards, everything works great for a few days, and then bam, BSOD's again. I've...

Thought I'd just come in to mention: I tried updating PowerISO, but that didn't solve the BSODS. What happened before I went on to step 3 though, is one of the BSOD's resulted in my "ATi Catalyst" manager program not working after subsequent restarts. I uninstalled the manager program, and...

Hi again, After setting the RAM, I reformatted my PC, and it ran fine, for a while, but just now, it failed to boot, then BSOD again on the second attempt to start. I've attached the dump file. Thanks in advance

Thanks for the super fast response. I've made some changes to the BIOS, is this better: http://i12.photobucket.com/albums/a216/Saaaaaad/Memory.jpg Also, I set the DRAM speed to DDR3-1333. Is it incorrect (or bad) to set it at DDR3-1600?

Ohhh, I didn't realise CPU-Z was a software (I thought it was name for a BIOS tab...) I've uploade the screens you asked for: http://i12.photobucket.com/albums/a216/Saaaaaad/MemoryScreen.jpg http://i12.photobucket.com/albums/a216/Saaaaaad/SPD1.jpg...

Well, I ran Memtest again last night, and it found like 1000 erros (after like 11 passes). THen I restarted and ran it again, and now its finding no errors..I guess its just safe to replace the RAM. @TorrentG: I'm not sure what those tabs refer to in terms of my BIOS (no tabs with those names...

Hi again, I've updated the Logitech Setpoint software, and the marvell yukon driver, but I've just had 2 fresh BSODs. The 2 sticks of RAM i have in place, came out clean after 10 passes on Memtest. I've attached the new minidumps, could you guys take a look please? The BSODs are starting to...

Thanks cybercore. As I said, one of the sticks was faulty, and I believe I removed the correct stick, since MEMTEST no longer shows errors, but I'll try updating those drivers, and running memtest again. I might reconnect the faulty stick just to see what the results are. Either way, I think I...

Hi everyone, I've been getting a lot of BSODs lately, on my relatively new computer. At first I thought it might be faulty RAM, and ran Memtest, which showed a failure in one of the sticks (i had 3 x 2gb DDR3 RAM). I took out one stick, and ran memtest again, and it showed no errors after 10...