Recent content by Titoos

Hi, Tried these drivers - same thing with Event ID: 219 - Windows Kernel PNP - WpdBusEnumRoot\UMB\2&37c186b&0&STORAGE#VOLUME#_??_USBSTOR#DISK&VEN_GENERIC&PROD_USB_CF_READER&REV_1.01#058F312D81B&1# I experienced similar thing with my laptop, but with the USB port. Everything's working fine...

Hi, Here are reports. No minidump - didn't have a BSOD. Thanks for your help.

Probably, you're right. I did not install any specific drivers for this cards' reader. These are MS drivers - ver. 6.1.7600.16385 (2006-06-21). The problem is linked to WUDFPf.sys and WUDFRd.sys. The above Windows updates install a newer version of these files: 6.2.920016384. Description: The...

I can confirm. After installation of KB2685813 and KB2685811 (Kernel-Mode Driver Framework 1.11) I started to receive an error - Event ID: 219 - Windows Kernel PNP - WpdBusEnumRoot\UMB\2&37c186b&0&STORAGE#VOLUME#_??_USBSTOR#DISK&VEN_GENERIC&PROD_USB_CF_READER&REV_1.01#058F312D81B&1# Though I did...

I removed AMD Overdrive, also updated Skype. Regarding bad RAM suspicion, I'm using XMP settings in BIOS (but had to set them manually) tCL: 9 tRCD: 9 tRP: 9 tRAS: 24 I am not a memory tweaker too, so I was a bit afraid cause 1.650v (it's recommended by RAM producer) is marked "red" in...

Thank you, Yes, there are JMicron controllers (JMB362), SATA2 in fact, and that's why I connected my SSD to Marvell SATA3. (Anyway, I'm planning to change this mobo soon, because there is no new BIOS from manufacturer - I have the latest from F2) BIOS sees SSD when connected to JMicron...

Hello, First, my config: Processor: AMD Phenom II x4 945 AM3 Motherboard: Gigabyte GA-790FXTA-UD5 AM3, BIOS F2 RAM: DDR3 Mushkin 996776 4x4 GB (16GB) graphics: Gigabyte Radeon HD 7950 GV-R795WF3-3GD Disks: - SSD Crucial m4 128GB - WD Caviar Black 1TB WD1002FAEX - Samsung F3 HD103SJ 1TB -...