What BatteryHub does
MakeUseOf describes it as a free, open-source app that shows how much charge your mouse, keyboard, headset and controller have left, right on the Windows taskbar. It works on Windows 10 and 11. By default, the project's README says it draws entries such as a headset at 30% and a mouse at 93% next to the notification area.
The app was renamed. The README notes that BatteryHub was formerly called Wireless Battery. Some forks and older copies of the repository still use the old name, so check which one you are downloading.
The app is also new and moving fast. One repository review site says the project was created on 2026-11-16 and already had 228 forks and hundreds of open issues. That is a sign of strong interest. It is also a sign to expect rough edges, and I haven't tested it myself.
How it compares with Windows
MakeUseOf notes that Windows 11 can show battery levels for some Bluetooth accessories in Quick Settings. BatteryHub keeps those readings in view and also reads several supported devices that connect through their own USB receivers. That second part matters for anyone with a dongle-based mouse or keyboard.
The README's table spells out the method for each device family. For Xbox controllers, it lists the Xbox Wireless adapter, USB or Bluetooth, and says the app uses the Windows.Gaming.Input battery report with an XInput fallback. Some earbuds work through Windows device properties or Google Fast Pair broadcasts, and can show left, right and case levels.
Daily use
- Low battery: MakeUseOf reports that readings turn red at 15% or below, and a lightning bolt appears when a device is charging.
- Sleeping devices: if a mouse goes to sleep, the app dims its last known reading to show it hasn't refreshed. A dimmed number is old data, so don't treat it as current.
- Refresh rate: levels refresh every 60 seconds, and right away when a device is plugged in or the PC wakes up. You can change the interval in the settings.
- Less clutter: you can hide individual devices or switch to separate tray icons. In tray mode there is one icon per device with the number drawn in it, and the app switches to this automatically when the taskbar is vertical or can't be found.
- Placement: the README says you can choose to place the widget right of the notification area, at the left edge, or before the taskbar apps.
- Multiple monitors: the widget can show on every monitor's taskbar.
- History: MakeUseOf says the app can chart readings over the past day, week or month. That helps you spot a device that needs charging more often than it used to.
Per-device names are stored on your PC. The README says custom names live in the current user's Windows registry, under Software\WirelessBattery, DeviceAliases.
Check compatibility first
Brand support does not guarantee model support. MakeUseOf's example is the Keychron K5 Max. On stock firmware it reports battery over Bluetooth. Through its 2.4 GHz receiver it needs a firmware patch. MakeUseOf says the GitHub page lists which models work and how they need to connect.
The PC Watch coverage makes the same point. It says Bluetooth devices that show a level in Windows settings are supported, but some products are not, depending on the maker and connection method.
Before you install:
- Find your exact model in the README's device table.
- Note the connection method it lists: Bluetooth, vendor receiver, USB cable, and so on.
- Check for any firmware requirement.
- Make sure your device is connected that way.
Installation
The README tells you to download BatteryHub-Setup-<version>.exe from the latest release. There is also a portable ZIP: unzip it anywhere and run BatteryHub.exe. The bare BatteryHub.exe also works on its own.
PC Watch reports that the app is roughly 350 KB, uses about 2 MB of memory, and needs no external runtime or administrator rights. Those are the developer's figures, not independent measurements. Expect a possible SmartScreen or unsigned-app prompt with a small indie project, and download only from the official repository's releases.
Troubleshooting
- Device missing: confirm the model and connection mode match the table. Then try Refresh now from the tray menu.
- Number is dim: the device is probably asleep. Wake it and wait for the next refresh.
- Widget hidden behind apps: the README warns that on a very full, centered Windows 11 taskbar, app buttons can reach the widget. Try another widget position or tray-icon mode.
- Unsupported device: the command-line options include a --report switch that opens a "Request support for a device" window. The README also lists --list and --json, which print every device and its battery level.
Alternatives
There is at least one similarly named project. The battery-hub project on GitHub is a separate dashboard-style app with per-device tray indicators, and it can be installed with winget. It is a different program from the taskbar utility covered here, so don't mix up the two.
Verdict
BatteryHub looks like a handy way to keep an eye on wireless peripherals, especially if you use dongle-based gear. It is very young, so test it with your own hardware and read the compatibility table first. For a free, open-source GPL-3.0 tool, that is a fair trade.
References
- This free Windows app shows all your wireless battery levels on the Taskbar MakeUseOf · 2026-11-20T13:15:30+00:00
- GitHub - krisgfx9/Wireless-Device-Battery-Monitor: Show the battery level of wireless mice, headsets, keyboards and controllers on the Windows 10/11 taskbar. Lightweight tray app, no vendor software needed. Supports Logitech, Razer, SteelSeries, Corsair, HyperX, Glorious, PS4/PS5 DualSense, Xbox and Bluetooth devices. · GitHub github.com
- GitHub - abusayed0206/Wireless-Device-Battery-Monitor: Show the battery level of wireless mice, headsets, keyboards and controllers on the Windows 10/11 taskbar. Lightweight tray app, no vendor software needed. Supports Logitech, Razer, SteelSeries, Corsair, HyperX, Glorious, PS4/PS5 DualSense, Xbox and Bluetooth devices. · GitHub github.com