What the M560 is
The M560 2TB is a PCIe 5.0 SSD without onboard DRAM, and one of the first retail drives to use Silicon Motion's SM2504XT controller. Per KitGuru, it is a single-sided M.2 2280 drive with these characteristics:
- Interface: PCIe Gen 5 x4, NVMe 2.0.
- NAND: two packages of 218-layer BiCS8 TLC.
- Cache: none; the design is DRAM-less.
- Size and weight: 80 × 22 × 2.45 mm, 7 g.
- Test firmware: BS3563VN.
- Endurance and warranty: 1,500 TBW on the 2TB model and a five-year warranty.
- Capacities: 1TB and 2TB only.
Biwin's ratings differ slightly between the two capacities:
| Spec | 1TB | 2TB |
|---|---|---|
| Sequential read | 11,000 MB/s | 11,000 MB/s |
| Sequential write | 9,700 MB/s | 10,000 MB/s |
| Random read | 1.4M IOPS | 1.7M IOPS |
| Random write | 1.6M IOPS | 1.7M IOPS |
| Endurance | 750 TBW | 1,500 TBW |
The drive has no heatsink. A screw and a small screwdriver are bundled for installation. Biwin also supplies its Biwin Intelligence utility. It reports health, temperature and usage, and handles error scanning, secure erase, cloning, data migration, performance testing and firmware updates.
The controller behind it
Tom's Hardware notes the SM2504XT is hard to find in retail drives. Silicon Motion describes it as a TSMC 6nm, four-channel part supporting NAND at up to 3,600 MT/s. The company says total SSD power stays below 5W in active operation. It also supports Host Memory Buffer, which lets a DRAM-less drive borrow a little system RAM.
Treat the controller's headline numbers as ceilings. Silicon Motion's maxima are 11.5 GB/s read, 11.0 GB/s write and up to 2.0 million random IOPS. Biwin's own ratings for the M560 are lower, notably 1.7M random write IOPS on the 2TB. KitGuru's "2.4W max" refers to the controller in active mode. It is not whole-drive power draw. Biwin separately rates average drive power at under 5.2 W.
KitGuru's results
KitGuru's test rig was a Ryzen 7 7700X, 32GB DDR5-6000, an RTX 3050 and a Gigabyte X670E Aorus Xtreme board. Drives were wiped with HDDerase V4, and each test was run five times. The reviewer also checked that TRIM was active with the Windows command fsutil behaviour query disabledeletenotify. A result of disabledeletenotify = 0 means TRIM is on.
Sequential speeds beat the rating
- CrystalDiskMark 9 default: 11,428 MB/s read and 10,346 MB/s write.
- Peak Performance profile: 11,408 MB/s read and 10,331 MB/s write.
- ATTO: 11,450 MB/s read and 10,400 MB/s write.
- 128KB sequential, custom queue depths: 11,341 MB/s read at QD32 and 10,289 MB/s write at QD8.
Those numbers meet or exceed the rated speeds, yet the drive still sits in the lower half of KitGuru's comparison charts. That reflects how crowded the Gen 5 field is. Sequential writes at QD1 were particularly weak, second to last.
Random I/O depends on the test
KitGuru's results here look contradictory until you check the test profiles:
- Peak Performance profile, random read: 1,726,588 IOPS, which confirms the 1.7M rating.
- Peak Performance profile, random write: 1,585,269 IOPS by default. The review's conclusion cites a 0-fill test that reached 1,695,719 IOPS.
- Four-thread 4K queue-depth sweeps: best read was 536,510 IOPS at QD16 and best write 456,604 IOPS at QD32.
The two sets of figures use different thread counts and workloads, so the sweeps don't contradict the vendor rating. They do show that the rated maximum is a best case. The review also notes that the M560 ranked well in 4K reads at low queue depths. It was fourth at QD1, third at QD2 and second at QD4. It then slipped to seventh by QD32.
Application and game traces are the weak spot
- PCMark 10 Full System Drive: 557.79 MB/s overall, third from last in KitGuru's chart.
- Adobe startup traces: 290 MB/s average.
- Adobe usage traces: 553.6 MB/s average.
- Game-launch traces: 962 MB/s average. Battlefield V led at 1,331 MB/s and Overwatch trailed at 514 MB/s.
- File-copy traces: 2,996 MB/s average, with the 20GB ISO write at 5,552 MB/s.
- 3DMark Storage: 598.92 MB/s overall, third from last again. Game loading averaged 930.77 MB/s with a 53µs access time.
- Final Fantasy XIV Endwalker benchmark: lower half of the chart overall and in every scene.
These are bandwidth figures from replayed traces, not a sustained-transfer guarantee.
Real file copies
KitGuru copied 12 file sets to and from a 2TB Kingston KC3000. Writes averaged 3,416 MB/s and reads 5,118 MB/s. The 100GB data file was fastest both ways, at 7,272 MB/s write (15 seconds) and 6,717 MB/s read (16 seconds). The slowest was a 4.25GB 3D-printing folder of 166 files, written at 145 MB/s in 31 seconds. Small-file mixes punish every SSD, and this one is no exception.
Thermals
The drive peaked at 57°C in CrystalDiskMark's default write tests. It averaged 43°C across most testing and 36°C in 4K-focused runs, all without a heatsink. That is a real advantage over early Gen 5 drives. The caveat is that this is one desktop test bench. A cramped laptop or a board with poor airflow over the M.2 slot may behave differently.
How other reviewers compare
KitGuru's lukewarm trace results contrast with other coverage:
- Tom's Hardware called it one of the best all-around PCIe 5.0 SSDs it has tested, with class-leading responsiveness and excellent efficiency. Its sustained-write test measured a roughly 611 GB pseudo-SLC cache on an empty drive, with writes above 10.3 GB/s inside the cache, over 4.1 GB/s direct to TLC, and above 1.6 GB/s while the drive folds cached data back to TLC.
- TweakTown gave it 98%. Per a Windows-HQ summary, that was 95% for performance, 99% for quality and 99% for features. TweakTown scored value "N/A" because no firm price was available.
- ComputerBase, per a WindowsForum roundup, tested firmware BS3563VN on Windows 11 and recorded 4,976 in PCMark 10 Quick System Drive.
The differences likely come from methodology. KitGuru's PCMark 10 Full System Drive and 3DMark runs pull the M560 down its chart. Tom's Hardware stresses responsiveness and efficiency. Neither view is wrong, but they weigh different things.
Who should consider it
It suits:
- Gaming and general-use PCs on an AM5 or recent Intel board with a Gen 5 M.2 slot.
- Builds where heat, noise and power draw matter more than peak benchmark numbers.
- Buyers who want a Gen 5 drive without a bulky cooler.
It's less suited to:
- Workloads that write very large files continuously. Tom's Hardware's cache-exhaustion figure above is the relevant warning.
- Anyone who wants the top of every benchmark chart.
- Heavy random-write loads, where KitGuru lists weak writes in some tests as the drive's main con.
The reviewer's verdict is that it "outpaces" some 4-channel and even a few 8-channel drives in places. Overall it's a drive of trade-offs rather than records.
Pricing
KitGuru found the 2TB model on Amazon UK for £305.99 including VAT at publication. That is a dated listing, not a current or US price. NT Compatible's Tom's Hardware summary cites $364.99 for the 2TB. Check current listings before buying, because pricing is the deciding factor for a drive like this.
Bottom line
The M560 2TB hits its rated sequential speeds, stays cool without a heatsink and is frugal with power. It lags in KitGuru's PCMark 10 and 3DMark trace tests, and other reviewers flag write behaviour once the cache fills. For a mainstream Windows 11 desktop it looks like a sensible Gen 5 pick if the price is right. If your work involves sustained heavy writes, look at drives with DRAM and eight-channel controllers.
Correction (November 19, 2026): Tom's Hardware's sustained-write figures were wrong: its pseudo-SLC cache is about 611 GB on an empty drive, not roughly 150 GB, and post-cache writes run over 4.1 GB/s direct to TLC and above 1.6 GB/s while folding, not about 540 MB/s. KitGuru's Peak Performance random-write figure is 1,585,269 IOPS, not 1,586,269.
References
- Biwin M560 2TB Gen5 SSD Review - KitGuru KitGuru · 2026-11-19T09:32:59+00:00
- Biwin M560 2TB Gen5 SSD Review | KitGuru kitguru.net
- Biwin M560 2TB SSD Review: The DRAM-less drive to beat tomshardware.com