That catch is a firmware update from Dell Display and Peripheral Manager (DDPM). This is one reviewer's experience, not a confirmed defect. Dell hasn't acknowledged a problem that I could find.
What the KM746 is
Dell positions it as a compact combo of the KB746 keyboard, the MS746 mouse and a Dell Secure Link USB receiver. Dell's setup video says both the keyboard and the mouse share the same USB receiver.
Techau reports a price of about A$130 in Australia. Dell's US store listing shows $94.99.
The headline feature is charging. Dell claims a five-second charge gives a day of use. Dell's own figures put a full charge at up to three months for the keyboard and 1.5 months for the mouse. The techAU review notes these come from Dell's internal analysis and vary with use.
Dell's setup video gives separate numbers for a full recharge: about three minutes for the mouse and about five minutes for the keyboard. Don't confuse the five-second turbo top-up with a full charge.
Other hardware details from the review and Dell's materials:
- Keyboard: low-profile scissor keys, tilt adjustment, no backlight, a Copilot key and dual Windows/Mac legends. A three-position switch selects Windows layout, Mac layout or off.
- Mouse: silent clicks, a symmetrical shape, textured side grips and an adaptive scroll wheel. Cursor speed runs from 400 to 6000 DPI. Dell's video says holding a side button while turning the wheel gives horizontal scrolling.
- Connectivity: two Bluetooth connections plus 2.4 GHz through the USB-A receiver. Dell lists AES-128 encryption.
- Warranty: three years limited, with Advanced Exchange Service.
- Materials: up to 71% post-consumer recycled plastic across the set, at 72% for the keyboard and 64% for the mouse, with paper and cardboard packaging.
What went wrong
Bhatt plugged the receiver into his laptop and started using the set right away after a brief USB-C charge. The extra features, such as programmable keys, need DDPM. He installed it and customised some keyboard buttons.
Then, he says, the app applied a firmware update to the dongle, and the dongle stopped working permanently. He fell back to Bluetooth. Pairing with a single laptop worked well. Switching between two laptops was not reliable and meant repeated re-pairing.
Dell support sent a replacement box so he could test again. He says the same thing happened.
His advice follows from that. If you want the receiver to serve several laptops, don't install DDPM. He now runs two sets over Bluetooth, with each set paired to one laptop.
What is and isn't verified
- Verified: Dell's support documentation lists KM746 and MS746 as DDPM-supported. DDPM is a Windows-only app and requires Windows 10 build 17763 or later, or Windows 11, on x64 systems. Arm support is limited to Windows 11 on Snapdragon X-Elite or X-Plus.
- Not verified: the firmware version involved, whether DDPM always pushes the update, whether the update can be declined, and whether Dell has fixed anything. Nothing I found confirms a recall or an advisory. Bhatt's two failures are not proof of a widespread defect.
- Dell's own guidance: firmware updates are meant to be run from DDPM's Updates section. Dell's FAQ says to install DDPM only if you want to re-pair a device, customize buttons or keys, check battery status, or update firmware. That fits the idea that the receiver works without the app, as Bhatt found at first.
Dell has had receiver trouble before
A Dell community post from November 2024 concerned a different product, the Dell Universal Receiver, but the failure mode is similar. Dell said a dongle's firmware can end up in a bootloader state when an update doesn't complete, which cuts communication with the keyboard and mouse. Dell's suggested fix was a standalone bootloader firmware utility.
One user replied a year later that the fix did not work for them, and got an "Enumeration fail" error. That thread is not about the KM746, and I can't say the same recovery tool applies. It does show that a failed receiver firmware update has been a recognised problem on Dell hardware.
Practical advice
This is inference from the review and Dell's documentation, not Dell guidance.
- Think before you customise. If you only need basic typing and pointing, the receiver or Bluetooth works without DDPM.
- Keep a fallback input device. The keyboard and mouse share one receiver, so a bad update can cut off both.
- Follow Dell's update conditions. Dell says to keep the device connected throughout, keep the internet connection stable, and keep wireless battery above 20%.
- Use the troubleshooting steps if the receiver goes dead. Dell's generic steps are to check connections, try another USB port, update device firmware, unpair and re-pair wireless devices, and restart the PC. Nothing I found shows these revive a receiver that is permanently dead.
- Don't count on Bluetooth as a full substitute. Dell documents pairing with up to two Bluetooth devices. Bhatt found switching between two laptops flaky, though I couldn't verify that independently.
- IT admins should stage firmware. Dell's administrator documentation covers silent installs and mass firmware updates. I'd test on one unit before rolling out to a fleet.
Verdict
Hardware-wise, the KM746 has plenty going for it: fast charging, a quiet and light design, and a plastic-free package. The caveat is firmware on the receiver, which only matters if you rely on the dongle. If you do, hold off on the DDPM firmware update until Dell clarifies or you can confirm it's safe.
References
- Dell Pro 7 KM746 review: Great Battery Life, Avoid DDPM Firmware Updates! - techAU techAU · 2026-11-21T05:04:41+00:00
- Unboxing and setting up your Dell Pro 7 Rechargeable Compact Keyboard and Mouse KM746 | Dell Bhutan dell.com
- Dell Pro 7 Rechargeable Compact Keyboard and Mouse - KM746 | Dell USA dell.com