A computer motherboard with a processor, memory modules, and heatsink sits on a laboratory workbench.
Jetway's MTX-RYZ1 is a Mini-ITX industrial motherboard built around a laptop-class AMD chip, and it lists Windows 11 and Windows Server among its supported operating systems. According to LinuxGizmos, which spotted the board on Jetway's site, it pairs the Ryzen 7 PRO 8845HS with dual 2.5GbE, four DisplayPort outputs and a stack of serial ports. It is still marked "Preliminary", and neither pricing nor general availability has been announced.

Jetway's own product page is the primary source for most of what follows. The rest of this piece separates what the page establishes from what it leaves open.

A computer motherboard with a processor, memory modules, and heatsink sits on a laboratory workbench. What the board is​

The MTX-RYZ1 is a 170 × 170 mm board aimed at edge computing, digital signage, industrial PCs, factory automation, public sector, digital security and surveillance work. That market list comes from Jetway's marketing, not from confirmed customer deployments.

Jetway lists two orderable part numbers:

  • MTX-RYZ1-884500A1, which uses AMD's firmware TPM 2.0.
  • MTX-RYZ1-884502A1, which adds an onboard Nuvoton TPM 2.0.

Both have BIOS releases dated November 11, 2026, described as "Release for Production." That wording sits awkwardly beside the page's "Preliminary" banner. Jetway says nothing on the page about the board shipping, so the production-labeled BIOS is not evidence that it is on sale. Jetway also advertises a long-life embedded-class supply of five years or more.

The processor​

The Ryzen 7 PRO 8845HS is a Hawk Point part with eight Zen 4 cores and 16 threads. Third-party spec databases agree on a 3.8 GHz base clock and a boost of up to 5.1 GHz. They also give a default TDP of 45 W with a configurable range of 35–54 W. The chip integrates Radeon 780M graphics (RDNA 3).

The AI figure needs care. Jetway says "up to 38 TOPS" overall. Spec listings put the dedicated Ryzen AI neural engine at 16 TOPS. So 38 TOPS is a combined CPU, GPU and NPU figure. It is not NPU-only, and no real-world AI throughput for this board has been published.

Jetway calls the part the Ryzen 7 PRO 8845HS, not the "Ryzen Embedded 8845HS" that AMD sells separately. This piece keeps Jetway's name. Some of the chip's capabilities may not be exposed on the board.

Memory: an ECC discrepancy​

The board has two DDR5-5600 SO-DIMM sockets, dual-channel, up to 96 GB. On ECC, Jetway's own pages disagree. The summary reportedly mentions ECC and non-ECC support, and LinuxGizmos repeats that. The detailed specification table says "Non-ECC DDR5-5600 SODIMM". If ECC matters for your deployment, confirm it with Jetway for the exact part number and DIMMs before buying.

Displays: read the sharing caveat​

The board has four rear DisplayPort 2.1 outputs, each rated up to 3840 × 2160 at 120 Hz. It also has an optional eDP 1.5 connector (up to 4K120) and a dual-channel 24-bit LVDS connector (up to 2560 × 1600 at 60 Hz).

LinuxGizmos says the eDP and LVDS interfaces share connections with the DisplayPort outputs. Jetway's headline claim is support for four displays in total. Don't assume you can run four DisplayPorts and both panel interfaces at once. If you plan an embedded panel, check which DisplayPort it displaces.

Storage and expansion​

  • Two SATA III 6 Gb/s connectors.
  • Two M.2 M-key 2242/2280 sockets with PCIe 4.0 x4 NVMe. Jetway lists NVMe RAID 0/1 support.
  • One PCIe 4.0 x8 slot.
  • One M.2 E-key 2230 socket with PCIe x1 and USB 2.0, for wireless modules.

The sources give no slot power limits, card clearance details or wireless module compatibility list.

Networking and industrial I/O​

  • Two Intel I226-V controllers, each with an RJ45 port running 10/100/1000/2500 Mbps.
  • Four USB 3.2 Gen 1 ports at the rear, plus six USB 2.0 ports via internal headers.
  • Two rear RS-232/422/485 serial ports, plus four RS-232 headers.
  • A 16-bit GPIO header, SMBus and I2C.
  • Realtek ALC897 audio with line-in, line-out and microphone jacks.
  • A programmable watchdog timer, Wake-on-LAN and chassis intrusion detection.

Power and environment​

The board takes 12–28 V DC through a locking rear jack, or through an internal 2 × 2 connector, with AT/ATX mode selectable. Jetway gives a specific integration warning. There is no isolation between the external jack and the internal connector. The integrator must make sure only one power supply can be attached at a time, and must cover the external jack when using the internal connector.

Jetway lists operating temperature as 0–60 °C. Storage temperature is −20 to 70 °C, with 10–90% humidity at 40 °C, non-condensing. The 0 °C lower limit matters for outdoor or unheated enclosures. Plan for it.

Windows and Linux support​

Jetway's US page lists these Windows versions:

  • Windows 11 64-bit.
  • Windows 11 IoT Enterprise LTSC 2024 (24H2).
  • Windows 10 IoT Enterprise LTSC 64-bit (1809 and 1607).
  • Windows Server 2025 (24H2).
  • Windows Server 2019 (1809).

Linux entries include Ubuntu 24.04.3, Debian 11.3, Fedora 39, openSUSE 15.3, RHEL 10.0.0 and CentOS 8.1. Jetway provides Windows 10 IoT and Windows 11 drivers for the chipset, graphics, sound and LAN.

These are operating systems Jetway lists, not independent test results. Several Linux entries are old, such as CentOS 8.1 and Debian 11.3, so check kernel and driver support if you need a current distribution.

Both TPM variants are relevant to Windows 11 deployments. The board offers either AMD firmware TPM or a discrete onboard TPM 2.0 module. Some security policies prefer a discrete chip, so that choice is worth making at ordering time.

BIOS flashing​

Jetway warns against flashing the BIOS unless necessary, because a failed update can cause permanent system failure. It also says it does not offer direct end-user chip replacement. The listed procedure runs from a FAT32 USB drive:

  1. Copy the unzipped BIOS files to the drive.
  2. Boot into the BIOS and choose "Built-in EFI Shell" from Boot Override.
  3. At the Shell prompt, switch to the drive with fs0:, or fs1: if more than one drive is present.
  4. Run the *.NSH script to update automatically.
  5. Power the system off once the update finishes.

Bottom line​

On paper, the MTX-RYZ1 offers a lot for a 6.7-inch board. It has eight Zen 4 cores, four-display capability, PCIe 4.0 expansion, dual 2.5GbE and real serial ports, with TPM options and listed support for Windows IoT LTSC and Windows Server.

Several questions are still open:

  • Price.
  • Availability date.
  • ECC support.
  • Which display combinations work at once.
  • Real-world performance and thermals. No testing has been published, and the board must dissipate up to 45 W in a fanless or enclosed design.

Anyone specifying it should treat the "Preliminary" label as meaningful until Jetway says otherwise.

 

References

  1. Ryzen 7 PRO 8845HS lands on industrial Mini-ITX board with dual 2.5GbE - LinuxGizmos.com LinuxGizmos.com 2026-11-19T03:16:13+00:00
  2. MTX-RYZ1 AMD Ryzen 7 PRO 8845HS Mini-ITX Motherboard | Jetway usa.jetwayipc.com
  3. AMD Ryzen 7 PRO 8845HS Review, Specs, Value Index & Ranking (2026) - CPURankings cpurankings.com