A sleek gaming PC with RGB-lit cooling fans and displays showing CPU, GPU, and RAM stats.
For years, custom PC builders have treated the CPU water block like a tiny billboard, slapping small round or square screens onto the pump housing to show off processor temperatures or looping animations. Now, cooling and case manufacturer JONSBO is asking a question nobody else in the room dared to voice: why stop at the pump when the radiator fan frame has eleven inches of unused real estate? With the announcement of the JONSBO TX-360CG, the company has unveiled a 360mm all-in-one (AIO) liquid cooler that pairs a curved 6.67-inch IPS screen on the pump block with a second, ultra-wide 11.2-inch IPS ribbon display built directly into the side of its single-frame fan module.

The result is one of the most visually aggressive cooling components ever designed for a Windows 10 or Windows 11 desktop. However, packing two high-resolution panels onto a closed-loop cooler introduces practical considerations around case geometry, physical clearance, and Windows background software that every prospective builder should weigh before reaching for their wallet.

A sleek gaming PC with RGB-lit cooling fans and displays showing CPU, GPU, and RAM stats. JONSBO TX-360CG Dual-Display Architecture Explained​

Most display-equipped AIO coolers—including JONSBO’s own earlier TX-360, which debuted with a single 3.95-inch square 480 × 480 screen on the water block —confine their visual telemetry to the center of the motherboard. JONSBO also previously experimented with multi-screen layouts on its TF3-360SC cooler, which placed a 3.5-inch LCD on the pump and three smaller 3.38-inch screens along the edges of individual 120mm fans. The TX-360CG takes a more unified, panoramic approach by integrating two large-format IPS panels into a single cooling package:

  • The Pump Block Display: Mounted atop the CPU water block is a curved 6.67-inch IPS screen with a 2,400 × 1,080 resolution, a 60Hz refresh rate, and a listed peak luminance of 300 cd/m² (nits). In terms of size and pixel density, it closely resembles a modern smartphone display wrapped over the CPU socket.
  • The Radiator Fan-Frame Display: Built into the side of the unified ZC-360V2 360mm fan housing is an elongated 11.2-inch IPS strip display running at 1,920 × 140 resolution, 60Hz, and 350 cd/m² luminance.

According to coverage from Hermitage Akihabara, Guru3D, and Tech Times, both panels are managed through JONSBO’s proprietary JONSBO-AIO utility, which requires Windows 10 or later. The software allows users to display real-time system status telemetry alongside custom JPG, PNG, and MP4 media files. JONSBO’s official product page lists version 2.15 of the JONSBO-AIO setup utility (dated September 29, 2026) as the companion software for the unit.

Section Summary: The TX-360CG replaces the traditional single pump screen with a 6.67-inch curved water-block panel and a continuous 11.2-inch panoramic strip along the fan frame, driven by JONSBO's Windows 10/11 control software.

Cooling Hardware and Official Specifications​

Beneath the dual-screen light show, the TX-360CG relies on a high-speed pump and a single-frame triple-fan assembly to move heat off the processor. According to JONSBO’s official specification sheet and reporting from IT Home and XiaomiToday, the cooler features 400mm EPDM+IIR rubber tubing, a 27mm-thick aluminum radiator with a 20mm fin-stack thickness, and a 28mm-thick integrated fan unit. IT Home also notes that JONSBO offers the ZC-360V2 unified fan assembly separately in standard and reverse-blade orientations, as well as black and white finishes.

Here is how the complete hardware package breaks down according to JONSBO’s official specifications:

Component / MetricOfficial JONSBO TX-360CG Specification
Supported CPU SocketsIntel LGA 1851, LGA 1700, LGA 1200, LGA 115X; AMD AM5, AM4
Manufacturer D-TDP Rating325W
Pump Block Dimensions142.5 × 108 × 105.5 mm
Pump Speed & Power5,000 RPM (±10%) at 12V DC; 3.84W (±10%)
Radiator Dimensions397 × 120 × 27 mm
Fan Frame Dimensions (ZC-360V2)362 × 123 × 28 mm
Fan Speed700 – 2,400 RPM (±10%)
Fan Airflow (Per Fan)21.46 – 62.40 CFM
Fan Static Pressure0.49 – 2.46 mmH₂O
Fan Noise Level21.3 – 37.3 dB(A) max
Rated MTBF≥ 40,000 hours at 25°C room temperature
Pump Display Specs6.67-inch curved IPS, 2,400 × 1,080, 60Hz, 300 cd/m², 5V / 550mA
Fan Display Specs11.2-inch strip IPS, 1,920 × 140, 60Hz, 350 cd/m², 5V / 350mA
Listed Assembly Connectors4-pin PWM, 3-pin ARGB, USB 9-pin
OS & Software RequirementWindows 10+ with JONSBO-AIO utility

While JONSBO rates the cooler for up to 325W D-TDP and a 5,000 RPM pump speed, veteran PC builders know to treat factory thermal dissipation numbers as design targets rather than guaranteed benchmark results. Because the TX-360CG was only just listed in mid-October 2026, no independent thermal or acoustic testing has been published yet. How well that copper baseplate and 5,000 RPM motor handle a sustained all-core workload on a flagship Intel Core Ultra (LGA 1851) or AMD Ryzen (AM5) processor will depend on cold-plate mounting pressure, case airflow, and how loud the 5,000 RPM pump runs at full tilt.

Section Summary: The TX-360CG pairs a 5,000 RPM pump with a 2,400 RPM unified 360mm fan frame and supports modern Intel and AMD sockets, though its 325W thermal rating awaits independent third-party benchmarking.

What Builders Need to Check Before Buying​

If you are tempted by the prospect of turning the inside of your PC into a miniature Times Square, you should run through a quick pre-flight check before ordering. Hardware with this much physical and electrical presence demands careful planning.

1. Case Layout and Sightlines​

Look closely at where the 11.2-inch screen sits: it runs along the side edge of the 362 × 123 × 28 mm fan frame. If you mount the radiator in the top exhaust position of a panoramic "fishbowl" or tempered-glass showcase chassis, that 1,920 × 140 strip will face directly out the side window like a ticker tape above your motherboard. However, if your case has a wide top-bezel overhang, a solid side panel, or requires front-mounting the radiator behind opaque structural brackets, you could easily block the entire 11.2-inch panel from view.

2. Physical Clearance Over the Motherboard​

This is not a low-profile cooler. Between the 27mm radiator and the 28mm-thick fan frame, the top-mounted cooling stack measures roughly 55mm thick. Furthermore, the pump block itself is a towering 142.5 × 108 × 105.5 mm structure in order to house the curved 6.67-inch display. Builders should carefully measure the vertical clearance above their motherboard's VRM heatsinks and check whether the overhanging curved screen interferes with tall DDR5 memory modules or the backplate of a top-slot graphics card.

3. Power, Headers, and Software Overhead​

On its official specification page, JONSBO lists the electrical draw for the two screens separately: 5V at 550mA (2.75W) for the pump display and 5V at 350mA (1.75W) for the fan display, totaling 4.5W of 5V power across both panels. The specification sheet lists a 4-pin PWM connector, a 3-pin ARGB connector, and a 9-pin internal USB 2.0 header among the assembly's connections. Tech Times notes that if both screens require their own dedicated 9-pin USB 2.0 motherboard headers rather than sharing a pass-through or splitter cable, the cooler could occupy both internal USB 2.0 headers on many mainstream motherboards. Builders with multiple internal USB controllers—such as strimer hubs, PSU monitors, or case front-panel devices—may want to keep an internal powered USB 2.0 hub on hand.

Additionally, display-equipped AIOs rely on background Windows software to feed live system metrics and video frames over USB. While the 4-pin PWM pump and fans are driven by standard motherboard fan headers for core cooling, the custom screens depend on the Windows 10/11 JONSBO-AIO utility to render live telemetry and media.

Section Summary: Builders must account for a combined 55mm radiator-and-fan thickness, a 105.5mm-tall pump block, unobstructed side-window sightlines for the radiator screen, and internal USB 2.0 header availability.

Pricing and Availability​

JONSBO has listed the TX-360CG on its official website alongside the downloadable JONSBO-AIO Setup 2.15 package, with hardware press in Japan and China picking up the launch between October 14 and October 16, 2026. Neither JONSBO nor its retail partners had announced official pricing or regional retail release dates at the time of the unveiling.

For enthusiasts who love panoramic dual-chamber PC cases, the TX-360CG is an undeniable conversation starter that pushes integrated AIO displays into uncharted territory. Whether it becomes a staple of high-end showcase rigs will depend on where retail pricing lands and how smoothly the JONSBO-AIO software juggles two disparate screen resolutions at once.

 

References

  1. JONSBO TX-360CG Launches With Dedicated IPS Panels on Both Pump Block and Radiator Frame - Tech Times Tech Times 2026-10-16T07:28:38+00:00
  2. JONSBO TX-360CG AIO Uses Two Displays for Cooling and Monitoring guru3d.com
  3. JONSBO Introduces TF3‑360SC AIO Liquid Cooler with Four Integrated LCD Displays - XiaomiToday xiaomitoday.com