USB-C is a connector, not a speed grade
USB-C describes the oval, reversible plug. The manufacturer decides which data and power features sit behind it. A phone's USB-C port might only support USB 2.0, while the identical-looking port on a laptop might handle USB4.
Charging and data are separate systems:
- Power: USB Power Delivery lets the charger and device negotiate power, up to 240W on the newest hardware. The real charging rate is set by the weakest link among charger, cable and device. A 240W cable will not make a phone that tops out at 45W charge any faster.
- Data: The cable's wiring sets the data ceiling. USB 2.0 needs only a few simple conductors. USB 3.x and USB4 need extra high-speed lanes and tighter manufacturing standards.
A cable built mainly for charging can skip the high-speed lanes and still carry a lot of power. Standard USB-C cables handle up to 3A, which is 60W at 20V. Cables rated for more current need an e-marker chip that tells connected devices what the cable supports.
What 240W cables actually deliver for data
Manufacturer specs back this up. Anker's service documentation for its 240W USB-C cable lists charging up to 240W (48V/5A), a data transfer speed of 480 Mbps, and support for USB 2.0 and Power Delivery 3.1. Native Union's 240W Belt Cable Pro carries a note that it offers USB 2.0 480 Mbps data transfer and no video support. A review roundup at TechGearLab says of Apple's 240W cable that it is primarily designed for charging and only supports slower 480 Mbps data speeds.
That is a pattern, not a rule. The source article contrasts these with certified cables such as the Cable Matters 80Gbps USB4 cable, which pair 240W charging with 80Gbps data. USB-IF's compliance documentation also lists combined speed-and-power labels, including 20Gbps/60W.
Why the label can mislead you
USB-IF's cable logo rules explain why wattage-only packaging is common. Under its compliance update, all USB-C to USB-C cables must carry a 60W or 240W power marking, not a data marking. The same update says all cables except USB 2.0 USB-C cables must also be marked with their data rate. A High-Speed (USB 2.0) cable can optionally add the USB 2.0 trident or a High-Speed logo, but it is not required to.
In practice, a certified USB 2.0 cable can show only a 60W or 240W logo and never mention its 480Mbps data limit. A wattage-only label should therefore make you check the spec sheet.
The 100W rating has also been retired from the certification scheme. USB-IF replaced 100W USB-C cables with 240W cables in June 2021 and stopped certifying 100W cables in December 2021. Some cables are still advertised at 100W.
Doing the math on a USB 2.0 link
USB speeds are quoted in bits per second, but Windows File Explorer shows bytes per second. Divide by eight:
- 480 Mbps is 60 MB/s on paper.
- Real copies are slower. The Wikipedia article on USB communications says around 320 Mbit/s (38 MB/s) is sustainable in practice, once protocol overhead is included.
For comparison, USB-IF lists USB 3.2 at 5, 10 and 20Gbps, and USB4 reaches 40 or 80Gbps with the right hardware. These are signaling rates, not guarantees of sustained copy speed.
The slowest link wins
USB-IF says USB 3.2 products are backward compatible and will operate at lowest common speed capability. A USB 2.0 cable on a 5Gbps phone port limits the connection to USB 2.0 speed.
The source's author gives the example of a Galaxy S24 Ultra rated at up to 5Gbps. Connected to a PC with a basic USB 2.0 cable, it is capped at 480Mbps. I couldn't independently verify that phone's port rating, so treat it as the author's example. The fallback behavior itself is standard USB.
A faster cable is not a cure-all. Other bottlenecks include:
- The phone's internal storage
- The PC's port and drive
- How Android handles file transfers
- A hub, where every connected device shares the same bandwidth
How to test whether the cable is the problem
- Pick one large file and time a copy with your current cable.
- Get a cable you know is rated for 5Gbps or 10Gbps. Check its listed specs rather than trusting how it looks.
- Plug it straight into a fast port on the PC, with no hub or dock.
- Repeat the same copy. Change only the cable.
- If speed jumps, the old cable was the limit. If it doesn't, look at storage, the PC's port or drive, hubs, or the transfer method.
A cheap USB-C power meter can show charging behavior, but it won't reliably reveal data speed. For a mystery cable, a controlled copy test between two devices you know are fast is the better check.
Buying by task
- Charging a phone or laptop: Match the cable's wattage to the device, and use a compatible charger. Some phones also need a specific protocol such as USB PD PPS to reach their advertised charging speed.
- File transfers or portable SSDs: Look for an explicit data rating. The source suggests 5Gbps is plenty for most phones and 10Gbps suits portable SSDs.
- Docks and monitors: Confirm that your laptop supports video output over USB-C and check what the dock or display needs. Demanding setups may call for USB4 or certified Thunderbolt cables. Some cables don't support video at all. Both Native Union's and Anker's 240W cables carry notes that they don't support screen mirroring or video.
When shopping, look for an exact figure such as 5Gbps, 10Gbps, 20Gbps, 40Gbps or 80Gbps, or an explicit USB 2.0/480Mbps. Braiding, gold plating and a high price don't add data capability.
Caveats
Don't read this as "every 240W cable is slow". Some certified cables combine 240W and 80Gbps. Also, a USB 2.0 charging cable is fine for what it is. Native Union and Anker both sell certified 240W cables with USB 2.0 data. It becomes a problem only when you use one for a backup or an external SSD.
A reasonable habit is to label one properly rated cable for storage and keep the charging cables in their own drawer.
References
- USB-C power and USB-C speed have almost nothing to do with each other MakeUseOf · 2026-11-16T12:00:16+00:00
- Introduction to Anker 240W USB-C to USB-C Cable (3 ft / 6 ... service.anker.com
- The Best USB-C Cables techgearlab.com