The headline overstates things a little, but the observation holds up. On eligible consumer PCs the feature is on by default, it keeps several days of whole-system snapshots on the local drive, and its default storage limit grows with the size of the disk. Here is how much it can use, who gets it automatically, and how to adjust it or turn it off.
What arrived, and for whom
Microsoft's release notes for KB5095093, dated June 23, 2026, cover OS builds 26200.8737 and 26100.8737 on Windows 11 versions 25H2 and 24H2. They list Point-in-time restore as a new feature that rolls a PC back, including apps, settings and personal files, to a recent automatic restore point. The release notes do not say the update switches the feature on for everyone. Those rules are on Microsoft Learn's configuration page.
The feature is on by default for:
- Windows 11 Home devices
- Windows 11 Pro devices that are not domain-joined and not enrolled in enterprise endpoint management
It is off by default for:
- Windows Enterprise and Education editions
- Pro devices that are domain-joined or managed by an organization
There is one more condition. Microsoft says only devices with an OS volume of 200 GB or larger get the feature on by default, and smaller volumes can enable it manually. Redmondmag's coverage of the general availability announcement gives the same rules: point-in-time restore is on by default for Windows Home devices and unmanaged Windows Pro devices, assuming the OS volume is at least 200 GB.
The 200 GB figure refers to the size of the C: volume, not free space. Some coverage has blurred that. DigitBin, for example, described snapshots running on any PC with 200GB or more free storage, which does not match Microsoft's documentation. A 256 GB laptop SSD usually has a C: volume comfortably above 200 GB, so the author's machine qualified for the automatic default whether or not it had much free space.
The rollout timing has also been confusing. In August, Windows Latest reported that Microsoft would turn on "Point-in-Time Restore" by default for PCs running Windows 11 26H2 or newer. Microsoft later added an editor's note, dated October 29, 2026, to its Windows IT Pro blog post to clarify that point-in-time restore remains off by default in Windows 11, version 26H2. That snippet doesn't say which device classes the clarification covers. Redmondmag's June report described the off-by-default state for Enterprise, Education and managed Pro systems as lasting at least until Windows 11 version 26H2. Until Microsoft says more, check the setting on your own PC rather than relying on secondhand claims.
In short: Home and unmanaged Pro PCs with C: volumes of 200 GB or more that took the June update, or the cumulative updates after it, probably have the feature running right now.
How much space it uses
MakeUseOf described the feature as taking "2% of your Windows drive's storage space at the minimum." Microsoft's own description is different. In the Microsoft Learn documentation, 2% of the disk is the default maximum usage limit, adjustable between a floor of 2 GB and a ceiling equivalent to 50 GB.
Microsoft also says the space is not pre-allocated. The limit is an upper bound for VSS, and capacity that restore points aren't using stays available to the system. The documentation is also frank that, in practice, restore points typically use most or all of the space set aside for them. Microsoft adds that some or all of that space may already sit inside Windows' reserved storage, which reduces the net impact.
The author's 5 GB drop lines up with that default. Two percent of 256 GB is about 5.1 GB. Here is what the default cap looks like on common drive sizes, using Microsoft's documented 2% default, 2 GB floor and 50 GB ceiling (our arithmetic):
| Drive size | Default cap (2%) | Notes |
|---|---|---|
| 128 GB | ~2.6 GB | Below 200 GB, so off unless you turn it on |
| 256 GB | ~5.1 GB | Matches the MakeUseOf observation |
| 512 GB | ~10.2 GB | |
| 1 TB | ~20 GB | |
| 2 TB | ~40 GB | |
| 2.5 TB and up | 50 GB | Hits the ceiling |
Owners of large drives see a bigger number, but it is a smaller share of their disk. Owners of small drives notice the loss more, and they're the ones most likely to feel it.
The low-space safety valve
Microsoft Learn describes a safeguard that matters for small SSDs. When free space is 20 GB or less, the feature creates a new snapshot and then removes existing snapshots, oldest first, until more than 20 GB is free. The catch is that this check runs only when the scheduled task runs, and the task waits until the device is idle. Older snapshots are also removed automatically when:
- they pass 72 hours
- VSS storage exceeds its configured limit
- Windows updates need the space
Restore points share space with other VSS tools, including System Restore and third-party rollback software. Microsoft says the feature can't reserve a siloed pool, and it advises against running it alongside other VSS backup tools that might compete for space.
In short: expect roughly 2% of your C: drive to be used, capped at 50 GB. Windows clears snapshots on its own schedule when free space falls to 20 GB or below, not the moment space gets tight.
Schedules and editions
Snapshots are taken about every 24 hours, and each one is kept for about 72 hours. PCWorld describes the same defaults: Windows creates a new restore point approximately every 24 hours and retains the saved states for up to 72 hours.
The schedule is looser than it sounds. According to Microsoft Learn:
- The scheduled task starts only when the PC is idle, so gaps between snapshots can be longer than 24 hours.
- The task doesn't wake a sleeping device.
- It also runs about 30 minutes after startup, so PCs that restart often may capture snapshots more frequently than the setting suggests.
Home and Pro users can turn the feature on or off and adjust the storage limit. Only Enterprise can change frequency (4, 6, 12, 16 or 24 hours) and retention (up to 72 hours). Some how-to guides show frequency dropdowns, but Microsoft's table limits those settings to Enterprise.
You also can't create a snapshot on demand before risky work such as a driver update. For that, System Restore, which supports manual restore points, is still the right tool.
How to check or change the setting
Per Microsoft Learn (local administrator rights required):
- Open Settings.
- Go to System > Recovery > Point-in-time restore.
- Select View or edit.
- Approve the User Account Control prompt.
- Use the toggle to turn the feature on or off, and the slider to set the maximum storage.
The panel also shows current disk usage and existing restore points by timestamp. Command-line users can list or remove VSS restore points with vssadmin.
Turning the feature off doesn't free space right away. Microsoft says existing restore points stay until retention or disk-space rules remove them, and the scheduled task keeps cleaning up during idle periods until none remain. Your space will come back gradually, not the moment you flip the toggle.
Admins can manage the feature through the PointInTimeRestore node of the Recovery CSP. Settings include EnablePointInTimeRestore, SetMaxDiskUsage (2048–51200 MB), SetRestorePointFrequency and SetRestorePointRetention, with time values in minutes.
How to restore
Restores start only from the Windows Recovery Environment (WinRE):
- Enter WinRE through Settings > Recovery > Advanced startup. Windows also opens it automatically after repeated failed boots.
- Select Troubleshoot > Point-in-time restore.
- Enter your BitLocker recovery key if the drive is encrypted.
- Choose a restore point, select Continue, review the warnings, then select Restore.
Before you start, check these points from Microsoft's documentation:
- Free space: you need at least as much free space as the total size of all restore points. On a nearly full drive, the restore may not run.
- Data loss: everything after the snapshot is lost, including files, apps, settings, passwords, certificates and keys. Files in OneDrive aren't affected.
- Security updates: a rollback can undo recent security updates and policies.
- Encrypted files: files encrypted with EFS can block a restore.
- Edition changes: snapshots don't carry across editions. Upgrade from Home to Pro and the Home snapshots are no longer available.
- Power: keep the PC plugged in. Losing power mid-restore can leave it unbootable.
- Known issues: Outlook may need its .ost file rebuilt afterward, and Recall turns off until you re-enable it.
Is it worth the space?
The feature covers more than System Restore did. Microsoft's comparison describes System Restore as covering "system files and settings," with variable app and user-data coverage. Point-in-time restore captures the full system state on a schedule. For someone whose PC was fine on Tuesday and won't boot on Thursday, that is a real safety net, and it takes no technical skill to use.
It is not a backup, and Microsoft's documentation says as much in practice:
- Only the OS volume is restored.
- Snapshots stay on the same disk.
- Snapshots can't be exported or mounted as images.
- If the SSD fails, the snapshots are lost with it.
As PCWorld puts it, Point-in-Time Restore is not a substitute for a regular backup.
Our take: on drives of 512 GB or more, leave it on. A few percent of disk is reasonable insurance against a bad update or driver. On 256 GB machines that regularly drop below 20 GB free, lower the slider toward 2 GB or turn the feature off, and keep your real backup, whether File History, an image tool or cloud sync, separate. Whichever you choose, make sure you can get your BitLocker recovery key before you need it. Otherwise WinRE will stop you at step 3.
References
- Windows 11 turned on a storage-hungry restore feature, and it's eating your C: drive MakeUseOf · 2026-11-22T21:30:16+00:00
- June 23, 2026—KB5095093 (OS Builds 26200.8737 and 26100.8737) Preview | Microsoft Support support.microsoft.com
- Windows 11 July Update: Point-in-Time Restore Now Default digitbin.com