ahci

Whilst attempting to install Windows 11 onto my new PC I am getting a message saying "We couldn't find any drives. To get a storage driver, click Load driver.". I am using an AMD Ryzen 5 5600x CPU with an ASUS ROG STRIX B550-F GAMING WIFI II motherboard. The storage device is a Samsung 960 Pro...

On my laptop Asus HDD is Disk0. I have installed Windows on SSD but Recovery Partition is on HDD (Disk0), also EFI System Partition. My laptop has only one SATA port so I cannot change to other port SATA. In BIOS settings in SATA configuration I have only two options, AHCI and Intel RST Premium...

SATA Mode only shows RAID option. I did all the update on my Windows 10 and downloaded the necessary Drivers from my Unit's Manufacturer Website, Intel, and Microsoft. And my SSD M.2 2280 cannot be detected. I checked and it should be compatible. M.2 slot might be disabled but I don't know how...

AMD release Chipset Drivers for Ryzen processors. This driver set offers optimized chipset compatibility with AMD Ryzen processors and AMD Socket AM4. Ready for AMD Ryzen processors - AMD Socket AM4 represents the company’s new future-proof platform targeting the fastest DDR4 memory, PCIe 3.0...

Hi, bit of a long shot, not sure if anyone will be able to help me. I remember a good few years back i would always use the latest SATA or matrix / RST drivers and would always update them regularly, I’m pretty sure i have had newer drivers on my laptop in the past than what i have now, i...

Got a new Kingston SSD for using as system drive. Previously got system on HDD, Windows 8.1 updated from a Win 8 license. I have 1 SSD (the Kingston) and another 3 HDDs. I used Windows 8 Boot DVD with license. The problem is as following: - got Windows on SSD drive with all HDD disconected after...

So recently I had to get new hardware for my rig. My old motherboard sadly died so new processor, new motherboard. Switched from a AMD Phenom II X6 1055T to a Intel Core i5 4460 and only had an issue due to my motherboard using AHCI and my setup was for IDE but no blue screens after I changed my...

When reading some config recommendations always two different hardware features are mentioned: AHCI and ACPI What is the difference? Both seem to be power-saving-related. Is one for hard disks and the other for CPU only? Is one in BIOS-only configurable the other from WinOS configurable? Peter

I Just found and tried this, it's so simple and works great. No need to change it in BIOS and reinstall OS or do the regedit method. To change IDE/SATA mode to AHCI from with in windows. Run msconfig (right click far left bottom corner of desktop then left click run, type msconfig). Click...

When I hit the "F2" key to boot, it is forever stuck at the initializing system diagnostics screen. I tried running it in safe mode as well. Am I going about this wrong? Can I change the SATA settings in a different boot menu? I'm running the newest update of Windows 8, HP pavilion envy dv7 8 GB...

I literally have no clue why or how did this happen. One day, I got home and boot up my laptop to finish a project for school. Then, while the Windows boot screen was loading, it suddenly flashed the BSOD and rebooted. I am quite experienced with these kind of problems. Sometimes, an error like...

Hello. I have a big problem and I would like very much if you can, to have patience to read the entire post. I'd like to give me the solution of this problem only if you are really sure and you had such problems. PC configuration: OS: Windows 8.1 x64 CPU: Intel Pentium Dual-Core E5200@2.5...

Hello everyone. I have an older self-build computer which is several years old. It has an ASUS P5Q Pro mobo and an old Intel Q9400 processor. I originally had WinXP Pro installed on this computer. I went out and bought an OEM copy of W7 Pro and installed it. So I had installed an OEM version...

Hey everyone! Some background info: I built my computer ~2 years ago and it worked fine for about half a year, until it crashed. Since then I've been unable to reinstall Windows and I kinda forgot about it... which sucks! So please help me get it up and running again :) Motherboard: GigaByte...

Hi, I believe one night my RAID driver crashed and now Windows doesn't see my array. Some History: One night I was trying to use Glassfish outside of Netbeans, but my website wouldn't work. So, I try to close Glassfish and went back to Netbeans because I know my site worked fine through...

I am using Dell Inspiron N3521 Laptop. I am trying to install XP in my laptop. But I am getting BSOD( 0X0000007B ). I have changed AHCI to ATA from my BIOS but it didn't help. And didn't find options like IDE or Comp mode in my BIOS to try. I have deleted my hard drive ( I mean now It's...

Flashed the bios to something relevant. I have two ssds to test, a vertex plus r2 and agility 3, both in ICY DOCK mounts. The front panel HDD lights flash a bit (though that probably doesn't mean much). http://www.newegg.com/Product/Product.aspx?Item=N82E16817994083 Getting in the BIOS is a...

I just put together a brand new PC build with all new components. In the middle of a custom install of Windows 7 on the HDD (the system only has one 1TB 7200rpm toshiba HDD), the installation screen went blank and the computer restarted. After restarting, the monitor displayed bootdisk mgr...

I did a major rebuild last year which included Samsung 830 series 128Gb SSD as OS, apps and programs plus 1tb WD HDD as storage. Samsung Magician shows that AHCI is not enabled and suggests that this is slowing the PC. Device Manager shows IDE ATA/ATAPI Controllers as; Intel(R) 7...

Hello i could use some help. Ive been trying to install Windows 8 on a secondary computer for a few days now from a bootable USB drive and i cant get it too install. It just gets stuck on the purple screen saying Setup Files loading. Im trying to install it on a older motherboard (Asus Rampage 2...