Win10 64 Bit aon an Asrock H470 Mini-PC.
Regular display is connected via HDMI cable. Works fine alone. Sometimes I want to use a second display simultaneously. It is an older VGA monitor (1280x1024 resolution) connected with a VGA cable to the VGA outlet of the computer. After turning it on and...
Since about October 19, 2023, a lot of times when the Notification Center gets invoked, one or both of my external displays goes super saturated/contrasty. Here's a simulation of how it looks:
It looks almost exactly like two copies of the monitor image are being added together using a "color...
I have an HP laptop, which I previously had connected to an external monitor. So I had two monitors that were active and tried to disable one of them. Unfortunately, the one I disabled, was my external monitor, and I can’t find any way to enable it again, I previously used one of the windows...
I finally decided to upgrade my pc from 1909 to 20H2. The process was running fine, went through one reboot and continued installing then just shut down!
I physically restarted and got a message that windows is undoing update which it did through several steps and I was back in 1909. A microsoft...
So I have two monitors on my pc one connected by VGA to the CPU and one connected with HDMI cable the GPU. Its kinda wank and I don't how windows managed to make the monitors work but they do except every time I turn on my PC the second monitor doesn't turn on. So I have found a stupid way to...
I have recently run superantispyware. I am unaware of any other changes I have made but all my screen settings have been lost, my screen size and icon size have gone back to default and appeared down the left of the page in alphabetical order.
I have reset most of these?
The one thing that I...
I have a laptop with Windows 10 and dual monitors. I set one background image on monitor 1 and another on monitor 2 through "themes and related settings". I have it stretch to fit monitor and it looks pretty good. Problem? I have to redo every time I reboot.
When I reboot and login, I see...
I recently changed my Hard drive for a SSD, and today ive gotten multiple freezes, the computer is unresponsive and all audio stops for about a minute. There is no logs in the event viewer either.
This last time, everything froze, but i was still able to move my mouse, but it was extremely...
I received an installation update about five weeks ago and my dual monitors will now only mirror the same data. I've tried changing the display settings, with no success. Any suggestions?
I have a KVM switch, one of those newer ones that switch both the PS/2-style keyboard and mouse connectors and also the USB keyboard and mouse connectors, and switches the VGA monitor connection. I had a really old KVM switch that was from back when PS/2 connectors where the norm, but for some...
annoyance
display issues
dualmonitors
dvi
email server
focus switching
hardware
keyboard
kvm switch
monitor connection
mouse
pc setup
power supply
screen management
signal
troubleshooting
usb
user experience
vga
windows
Hi everybody, first post here, I just want to say thanks and I guess you will help me to solve all my doubts, sorry if this is not the right place to post this, feel free to place my post in the right category if needed.
My first question is about the display settings for two identical iiyama...
After changing the video card the second monitor does not show up in screen resolution & both screens show the same thing.
How do I get the screen resolution to show both screens like before so that I can select what shows up in the second screen.
Home build, Asus P5K Premium WiFi,Intel,
CPU...
asus p5k
configuration
corsair
display settings
dualmonitors
evga
graphics card
hardware
home build
intel core 2
monitor setup
overclocking
pc components
pc performance
sata hard drive
screen resolution
tech support
troubleshooting
video card
windows 8.1
I am running a system with two monitors, one is running on a DVI and the other is running on a VGA. Not long ago I noticed that the VGA is cutting off one side of the desktop. The part it is cutting off the the strip on the left, the Windows button and everything up the left side of the screen...
configuration
desktop
display issues
display settings
dualmonitors
dvi
graphics
graphicsdriver
hardware
left side
monitor settings
monitorsetup
resolution
screen cutoff
system
troubleshooting
user experience
vga
windows
windows button
Hello,
I have dual monitors correctly configured; when I boot and log as any user, the main monitor remains the same.
However, if then I switch to another user, then switch back to the first user, everything is now switched:
My main display gets on the second monitor with taskbars.
Is this a...
Hi,
I need to allow someone to remotely connect to my windows 10 desktop, and am wondering if this is possible:
I have a dual desktop monitor setup that is extended (not mirrored), and am wondering is it possible to grant someone remote access only to the secondary monitor?
I would like to...
Hello
How do I change the background image on two monitors, so that they do not show the same background?
Info: I have 2 monitors with different resolution / number of pixels.
A solutions without 3. part software will be preferred
I have a VAIO laptop running Windows 7 with two monitors connected. One monitor is connected through the VGA port, the other is connected to the HDMI port. Both monitors are identical, and the one that is connected to the HDMI port is connected using an HDMI/VGA adaptor. I've been trying to set...
My pc has got two monitors with a keyboard and a mouse where I have additional ones lying around. I thought it would be great if I could work on one monitor while my brother uses the other one.
I found softxpand on this site http://www.miniframe.com but the installation does not work, I already...
I have the display set to extend, have the monitors set to the correct order, and the mouse moves easily across the two monitors. But I can't drag a windows from monitor 1 to monitor 2. I did remember to reduce the size of the window, but while it moves over to the side of monitor 1, it does...
Hello,
Recently I launched an application that went into fullscreen, and whenever I quit, I was in Windows Basic.
I tried everything, using services, changing the options in performance... etc.
However, If I unplug my second monitor, I can access Windows Aero just fine.
I have already tried...