Navigation section

hardware raid

About this tag
Hardware RAID refers to a RAID configuration managed by a dedicated controller card, such as an Adaptec 2405 or Silicon Sil3114, rather than by the operating system. Discussions on WindowsForum.com cover topics like boot failures after installing Windows Server 2016 on a Silicon Sil3114 RAID5 array, converting a hardware RAID-1 system to a single disk using tools like Paragon Hard Disk Manager, and adding a RAID0 storage volume alongside an existing Windows 7 installation using Intel RAID Manager. Users also compare hardware RAID to software RAID, noting that hardware RAID offloads processing from the CPU and can offer better performance and reliability. Common challenges include driver issues, boot configuration, and migrating data between RAID levels.
  1. K

    Windows server 2016 with Silicon Sil3114 Raid5 system with MSI Main board won't boot

    Hi I have installed Windows server 2016 essentials on a system using Silicon Sil3114 Raid5 with 3 4TB Drives the install went find as normal but the system will not boot. When the system is starting up I hit <F11> and the Raid5 system is there as an option to boot on, but when I select it, it...
    • Kentos
    • Thread
    • 4tb drives bios settings boot boot issues data recovery disk management error message essentials hardware compatibility hardware raid installation msi motherboard raid reinstall server configuration startup options tech support troubleshooting windows server 2016
    • Replies: 1
    • Forum: Windows Server Forums
  2. K

    Windows 10 RAID 5, hardware or software

    Thanks to my discovery of this forum my video server is well on its way to being set-up (Thanks to Neemobeer). My next question has to do with setting up a RAID 5 array. As I understand RAID it provides some level of data redundancy and a higher read speed than a plain old JBOD (spanning)...
    • Kurt Giesselman
    • Thread
    • asus a8n-sli configuration data redundancy data security drive array hardware raid jbod nvidia performance raid sata ports server configuration silicon software raid storage tech discussion toshiba drives user inquiry video server windows
    • Replies: 1
    • Forum: Windows Help and Support
  3. MGatehouse

    Windows 7 Convert Raid-1 to single disk

    I have a Windows 7 Pro X64 system which boots from a two-disk hardware RAID-1 array, operating from an Adaptec 2405 hardware-RAID controller. I want to migrate my system and all data back to a single, new hard drive. I use Paragon Hard Disk Manager Suite 15, which has a handy Copy Disk option...
    • MGatehouse
    • Thread
    • adaptec backup bios boot issues data recovery data transfer disk copy disk migration enclosure hard drive hardware raid mbr paragon partition raid single disk storage tech support windows 7
    • Replies: 1
    • Forum: Windows Hardware
  4. C

    Windows 8 windows 8 raid 0 Q

    hi guys i did a raid 0 on my windows 8 [software raid not a hardware] and my question is how much ''stripe size{4k 16K 64K}'' is use's? becose i'm combining software raid with hardware raid thank's in advance
    • cj4life
    • Thread
    • configuration data management hardware raid performance raid software raid storage stripe size windows 8
    • Replies: 2
    • Forum: Windows Software
  5. Einar

    Another RAID 5 fails?

    i have googled the web but could not come up with any answers. I have a windows softwareraid "5" (yes plz hate me for this) with 3x3TB disks, one disk recensently failed. I have just replaced the bad disk with a new one. But i have still no way to add the new disk to the "old" raid, and the bad...
    • Einar
    • Thread
    • basic data recovery disk disk management dynamics failure gpt hardware raid mbr missing drive movies raid replacement smart software raid storage troubleshooting tv shows windows
    • Replies: 4
    • Forum: Windows Server Forums
  6. therock

    Windows 7 Can I Pull a RAID1 Drive Converting to a Single Disc System Seamlessly?

    I have a Raid1 System I want to convert back to a single disc system without formatting and such. Can I? Windows Seven Pro Motherboard - Gigabyte GA-EP45-UD3P HDD's - Western Digital 750GB RE3 The onboard Intel Raid
    • therock
    • Thread
    • disk conversion gigabyte hard drive hardware raid migration motherboard raid storage wd re3 windows 7
    • Replies: 6
    • Forum: Windows Hardware
  7. O

    Windows 7 RAID0 Storage Volume

    Hello Forum. I already have Windows 7 (Pro64Bit) Installed on a 500GB Drive, I would like to Add a RAID0 Volume with 2 other 1TB Drives I have Gone into My Intel Raid Manager on my (ASUS P6T SE mobo) and selected to configure Sata as RAID and then added my 2 1TB drives as a RAID0 I Have also...
  8. A

    What Is RAID

    The article covers Advantages of RAID, RAID 0, RAID 1, RAID 0+1, RAID 10 or 1+0, RAID 5, Software vs. Hardware RAID and Drive Selection What is RAID?
    • Adamsappleone
    • Thread
    • advantages capacity configuration data management data redundancy disk drive selection end users enterprise hardware raid performance raid reliability server software raid storage
    • Replies: 2
    • Forum: General Computing
  9. A

    Windows 7 Moving windows 7 from RAID 5 to SSD

    Ok, So I put together a new HTPC and purchased 4 2TB drives which gave me a total of 6 TB after setting them up as RAID 5. I created two volumes from that RAID, one is 2 TB and the other is 4TB. Windows 7 is currently installed on the 2TB volume, though it only occupies about 17Gb. I...
    • Airhead315
    • Thread
    • asus p7p55 backup computer setup data recovery disk management hardware raid htpc image restoration installation issues media storage operating system raid raid controller ssd upgrade storage configuration system restore temporary disconnection volume management windows 7
    • Replies: 2
    • Forum: Windows Help and Support
  10. V

    Windows 7 Replacing invalid security id with default security id...

    Hi forum, I hope you're having a good day. Please help me with this situation of mine. Summary: The system requires chkdsk for the 2 mechanical hard drives in RAID-1. The disk check has returned lots of "Replacing invalid security id with default security id for file" ... Why is this...
    • vinhcit
    • Thread
    • backup chkdsk corruption corsair data recovery drive properties environment variables firmware hardware raid mechanical drive permissions raid recycle bin sata mode security id ssd system variables troubleshooting user variables windows 7
    • Replies: 4
    • Forum: Windows Help and Support
  11. K

    Windows 7 Windows Dynamic Volume FAILED on import

    Sorry for the long post :( I have 7 hard disks, all SATA 3 - are a hardware based raid 5 array 4 - are a raid-5 dynamic volume. All disks are intact no damage. Dynamic volume was used 2 hours ago, no issue I wanted to load windows 7 on it to see how it would perform on this machine. So...
    • kenny782
    • Thread
    • boot data loss data recovery disk management dynamic volume event viewer foreign disks hardware raid ide drive import issues performance testing raid sata software raid troubleshooting windows windows 7 windows xp
    • Replies: 1
    • Forum: Windows Help and Support
  12. K

    Windows 7 Slow file copy

    First of all - I love my RC 64-bit. Its stable, quick, excellent GUI and include all the drivers I needed. BUT One problem I encounter.. File copy and transfer is slow. When I copy files between SATA disks my transfer speed start up at approx 80 MBps but drops rapidly. After 20 secunds its doen...
    • [email protected]
    • Thread
    • 64-bit core i7 drivers external drive file copy gui hardware raid hdd performance issues sata seagate ssd system specs tech support transfer speed troubleshooting usb windows xp
    • Replies: 19
    • Forum: Windows Help and Support
Back
Top