ntp

  1. P

    HOW TO Configure time source as internal NTP server IN WINDOWS 2008 R2 DOMAIN

    HOW TO Configure time source as internal NTP server IN WINDOWS 2008 R2 DOMAIN ?
  2. P

    Windows 7 How to NTP timesync after Wifi connect (and not at boot time)?

    There are some guides available on how to NTP timesync a Windows system immediately after bootup. Read: on how to connect to Internet NTP-Time servers and synchronize local computer time with timezone time. But what if no internet connection is available at this (boot) time yet? So what I need...
  3. V

    Domain Controller Windows Time Synchronization Issue

    Dear all, I'm configuring my domain controller (Windows Server 2012 R2) to be synchronized with pool.ntp.org but the w32time source still remain Local CMOS Clock. - The PDC is a VM (VMware 6.0) and there is only this DC in the domain. - I tried to use VM client to sync with NTP server and it is...
  4. News

    TA14-017A: UDP-based Amplification Attacks

    Original release date: January 17, 2014 | Last revised: March 07, 2014 Systems Affected Certain UDP protocols have been identified as potential attack vectors: DNS NTP SNMPv2 NetBIOS SSDP CharGEN QOTD BitTorrent Kad Quake Network Protocol Steam Protocol Overview A Distributed Reflective...
  5. News

    TA14-013A: NTP Amplification Attacks Using CVE-2013-5211

    Original release date: January 13, 2014 | Last revised: February 05, 2014 Systems Affected NTP servers Overview A Network Time Protocol (NTP) Amplification attack is an emerging form of Distributed Denial of Service (DDoS) that relies on the use of publically accessible NTP servers to...
  6. J

    Windows 7 Sync clock with NTP server

    Win7 is able to Sync clock with NTP server, but Winxp is not able, showing error message: an error occurred while windows was synchronizing with xx.xx.xx.xx. I already disable firewall on server/client side. Does anyone know how to troubleshooting this issue? Thanks a lot for your response.
  7. News

    TA14-013A: NTP Amplification Attacks Using CVE-2013-5211

    Original release date: January 13, 2014 | Last revised: January 14, 2014 Systems Affected NTP servers Overview A Network Time Protocol (NTP) Amplification attack is an emerging form of Distributed Denial of Service (DDoS) that relies on the use of publically accessible NTP servers to...
  8. seekermeister

    Windows 7 Time Travel

    It's never been a problem before...at least not like this. At about 4:00 A.M. I noticed that Windows time was 2 hours behind the actual time, so I ran a sync on time.nist.gov, which corrected it. However, just ~20 minutes later, I was dismayed to see it had gone back again, but this time 3...
  9. News

    When SpecialPollInterval is used as a polling interval, the Windows Time service does not correct th

    An NTP client computer that is running Windows Vista, Windows Server 2008, Windows 7, Windows Server 2008 R2, Windows 8 or Windows Server 2012, may not correct the time if the following conditions are true: The NTP client syncs its time with the... Link Removed
  10. News

    When SpecialPollInterval is used as a polling interval, Windows Time service does not correct its ti

    On a NTP client computer that is running Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2, it may not correct its time if the following conditions are true: The NTP client syncs its time with the manually specified NTP server. The... Link Removed
  11. News

    Windows 7 A Tweeting .NET Micro Framework breathalyzer

    This project shows how you can use the Netduino Plus to make a tweeting breathalyzer—a standalone breathalyzer that can post messages about the detected alcohol level to Twitter, using an inexpensive alcohol gas sensor. The Link Removed is an open source electronics platform based on a 32-bit...
Back
Top