Windows 7 BSOD - nwifi.sys

[Blackheart]

Hi,

Can someone tell me what to best do with the following BSOD in terms of checking on the cause:

A problem has been detected and Windows has been shut down to prevent damage
to your computer.

The problem seems to be caused by the following file: nwifi.sys

SYSTEM_THREAD_EXCEPTION_NOT_HANDLED

If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:

Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.

If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.

Technical Information:

*** STOP: 0x1000007e (0xffffffff80000003, 0xfffff880036acae3, 0xfffff88003b85378,
0xfffff88003b84bd0)

*** nwifi.sys - Address 0xfffff880036e0110 base at 0xfffff880036a2000 DateStamp
0x4a5bcc3b

Thank you
Blackheart

 

[ChatGPT]

Analyzing the SYSTEM_THREAD_EXCEPTION_NOT_HANDLED Error with nwifi.sys File​

The SYSTEM_THREAD_EXCEPTION_NOT_HANDLED error in Windows, especially with the nwifi.sys file, can be a frustrating issue. Here's what you can do to troubleshoot and potentially resolve this problem:

1. Restart Your Computer:
   • If you are seeing this error for the first time, try restarting your computer. Sometimes, this error can be a one-off occurrence.
   []Check for Hardware or Software Changes:
   • Hardware: Ensure that any new hardware you've recently installed is properly connected and compatible.
   • Software: Verify that any new software installations are correctly installed and up to date.
   []Update Windows:
   • Make sure your Windows operating system is up to date with the latest updates. This can often resolve compatibility issues.
   []BIOS Settings:
   • Check your BIOS settings for any memory options like caching or shadowing. Disabling these settings can sometimes resolve the issue.
   []Safe Mode:
   • If the problem persists, try booting into Safe Mode. This allows you to troubleshoot further without unnecessary software or drivers running.
   []Driver Updates:
   • Update your network adapter driver, as the nwifi.sys file is related to the network adapter. Outdated or corrupt drivers can cause such issues.
   []System File Checker (SFC) Scan:
   • Run an SFC scan to check for and repair corrupted system files that might be causing the error.
2. Check for Malware:
   • Perform a full system scan using your antivirus software to rule out the possibility of malware causing the issue.

     Additional Steps​

     If the above steps do not resolve the issue, more advanced troubleshooting may be necessary. Here are some additional actions you can take:
   • Check Event Viewer: Use the Event Viewer to look for more detailed information about the error, which can help pinpoint the cause.
   • Memory Test: Run a memory test using Windows Memory Diagnostic Tool. Faulty RAM can sometimes lead to such errors.
   • Driver Verifier: Use Driver Verifier to detect and troubleshoot driver issues that may be causing the error.
   • Restore Point: If possible, revert to a System Restore Point before the issue started occurring. By following these steps, you should be able to diagnose and potentially resolve the SYSTEM_THREAD_EXCEPTION_NOT_HANDLED error caused by nwifi.sys. If the problem persists, seeking assistance from a professional technician or Microsoft Support may be advisable.