BSOD problem IRQL_NOT_LESS_OR_EQUAL (20+ daily)

Ridillz333

New Member
[h=3]Hello,[/h][h=3]I recently put together a new PC and have been having random BSOD problems from the word go. They happen at random times sometimes one every minute for an hour(as many as 50 a day), and sometimes days w/o issue. Its really starting to drive me up the wall. I tried to exhaust all other methods before posting like this, to avoid dumping the problem on someone else, but my patients has run out and the new semester is starting so I need a stable system.

Any help would be appreciated

Cheers.

View attachment Dump.zip

MEM.jpg











RAMMon v1.0 Build: 1002 built with SysInfo v1.0 Build: 1006
PassMark (R) Software - www.passmark.com[/h]Memory Summary For COREY-PC

Number of Memory Devices: 2 Total Physical Memory: 4072 MB (4096 MB) Total Available Physical Memory: 2889 MB Memory Load: 29%
Ram Type Not Populated DDR3 Not Populated DDR3
Standard Name DDR3-1333 DDR3-1333
Module Name PC3-10600 PC3-10600
Memory Capacity (MB) 2048 2048
Bus Clockspeed (Mhz) 666.67 666.67
Jedec Manufacture Name Corsair Corsair
Search Amazon.com Search! Search!
SPD Revision 1.0 1.0
Registered No No
ECC No No
DIMM Slot # 2 4
Manufactured Year 2000 Year 2000
Module Part # CMZ4GX3M2A1600C8 CMZ4GX3M2A1600C8
Module Revision 0x0 0x0
Module Serial # 0x0 0x0
Module Manufacturing Location 1 1
# of Row Addressing Bits 14 14
# of Column Addressing Bits 10 10
# of Banks 8 8
# of Ranks 2 2
Device Width in Bits 8 8
Bus Width in Bits 64 64
Module Voltage 1.5V 1.5V
CAS Latencies Supported 6 8 9 6 8 9
Timings @ Max Frequency 9-9-9-24 9-9-9-24
Minimum Clock Cycle Time, tCK (ns) 1.500 1.500
Minimum CAS Latency Time, tAA (ns) 13.500 13.500
Minimum RAS to CAS Delay, tRCD (ns) 13.500 13.500
Minimum Row Precharge Time, tRP (ns) 13.500 13.500
Minimum Active to Precharge Time, tRAS (ns) 36.000 36.000
Minimum Row Active to Row Active Delay, tRRD (ns) 7.500 7.500
Minimum Auto-Refresh to Active/Auto-Refresh Time, tRC (ns) 50.625 50.625
Minimum Auto-Refresh to Active/Auto-Refresh Command Period, tRFC (ns) 110.000 110.000
DDR3 Specific SPD Attributes
Write Recovery Time, tWR (ns) 15.000 15.000
Internal Write to Read Command Delay, tWTR (ns) 7.500 7.500
Internal Read to Precharge Command Delay, tRTP (ns) 7.500 7.500
Minimum Four Activate Window Delay, tFAW (ns) 37.500 37.500
RZQ / 6 Supported Yes Yes
RZQ / 7 Supported Yes Yes
DLL-Off Mode Supported Yes Yes
Maximum Operating Temperature (C) 95 95
Refresh Rate at Extended Operating Temperature Range 1X 1X
Auto-self Refresh Supported No No
On-die Thermal Sensor Readout Supported No No
Partial Array Self Refresh Supported Yes Yes
Thermal Sensor Present No No
Non-standard SDRAM Type Standard Monolithic Standard Monolithic
Module Type UDIMM UDIMM
Module Height (mm) 31 31
Module Thickness (front), (mm) 2 2
Module Thickness (back), (mm) 2 2
Module Width (mm) 133.5 133.5
Reference Raw Card Used Raw Card B Rev. 0 Raw Card B Rev. 0
DRAM Manufacture ID 0 0
# of DRAM Rows 0 0
# of Registers 0 0
Register Manufacturer
Register Type
Register Revision 0 0
XMP Attributes
XMP Revision 1.2 1.2
Enthusiast / Certified Profile
Module voltage 1.50V 1.50V
Clock speed (Mhz) 800.00 800.00
Minimum clock cycle time, tCK (ns) 1.250 1.250
Supported CAS latencies 6 8 6 8
Minimum CAS latency time, tAA (ns) 10.000 10.000
Minimum RAS to CAS delay time, tRCD (ns) 10.000 10.000
Minimum row precharge time, tRP (ns) 10.000 10.000
Minimum active to precharge time, tRAS (ns) 30.000 30.000
Supported timing at highest clock speed 8-8-8-24 8-8-8-24
Minimum Row Active to Row Active Delay, tRRD (ns) 7.500 7.500
Minimum Active to Auto-Refresh Delay, tRC (ns) 50.625 50.625
Minimum Recovery Delay, tRFC (ns) 110.000 110.000
Minimum Write Recovery time, tWR (ns) 15.000 15.000
Minimum Write to Read CMD Delay, tWTR (ns) 7.500 7.500
Minimum Read to Pre-charge CMD Delay, tRTP (ns) 7.500 7.500
Minimum Four Activate Window Delay, tFAW (ns) 37.500 37.500
Maximum Average Periodic Refresh Interval, tREFI (us) 7.750 7.750
Write to Read CMD Turn-around Time Optimizations No adjustment No adjustment
Read to Write CMD Turn-around Time Optimizations No adjustment No adjustment
Back 2 Back CMD Turn-around Time Optimizations No adjustment No adjustment
System CMD Rate Mode 2T 2T
ItemSlot #1Slot #2Slot #3Slot #4
 

Attachments

zigzag3143

Honorable Member
Microsoft MVP
Hi and welcome

Virtually all of these were caused by memory corruption. Please run these two tests.

1. Run memtest.

In order to check your ram we going need to do a test, Please download an burn one of the following iso's on an disk.
Memtest86

When you burned the iso on an disk, please turn off your computer and put the cd in your computer. After a while you will see a black screen saying "Press any key to...". Press any key.

Now let the test run for 5-6 passes. Every time the program returns an error the memory is corrupted / bad or defect or the motherboard is bad / defect. If this occurs then please test every single ram stick individually. When you find a good one wich returns no errors then please test it in every single slot your computer has.

If you get no errors on all slots at all, then continue to step 2 of this post.

Step 2, Run the windows driver verifier.

Please read the following instructions carefully and execute them like i said.

First make an backup of your important data on your computer, and check if you have an second computer to contact us if the driver verifier goes wrong.

Then make an system restore point, You can do this by:

Open the Start menu

Open the Programs menu

Open the Accessories menu

Open the System Tools menu

Finally, start System Restore

Pick the option for setting a System Restore Point and click on the Next button

Fill in a name for the restore point so you can find it and click on the Create button

Click on the Close button when done


After you done all that please continue with the following steps. Please read them carefully

Click on your Start button (Windows Orb) and type "verifier" and hit enter
Select the option: "Create Custom Settings ..." and click Next.
Select the option: "Select Individual settings from full list" and click Next.
Select all options except for the option "Low Resource Simulation" and click Next
Select the option: "Select driver names from a list" and click on Next
Then select all drivers EXCEPT for the drivers provided by Microsoft and click next
Then click on finish.

After doing all this reboot your system and wait for it to go to bluescreen, after the BSOD continue to use your computer normally. If you know what causes the BSOD then repeat doing this. if your system doesnt crash then let it run for atleast 48 hours.

It is normal that your system crashes here, This is because windows is stressing out all Drivers on your system to be able to test them.


Please post back to us what the problem is, memory or drivers. So we can assist you futher. It would be helpfull to know what drivers it are. Most of the time windows reports this.
 

Ridillz333

New Member
I'm running into problems running memtest. usually on the second pass I get "unexpected interupt halting cpu0" and the test stops.
 

zigzag3143

Honorable Member
Microsoft MVP
I'm running into problems running memtest. usually on the second pass I get "unexpected interupt halting cpu0" and the test stops.

Usually indicate of a memory issue. Can you pull all the ram but one stick? If so run memtest on that in stick in that mobo slot.
 

Ridillz333

New Member
Ran 9 passes on the other stick with no errors. as stated above the otherstick only makes it to the second pass before the halting error.
 

Ridillz333

New Member
Same deal, only makes it past the first pass.

Edit: I got another BSOD today "KERNEL_STACK_INPAGE_ERROR" and now I can't connect to the internet with the computer. It says I have a connection but no programs can utilise the connection.
 
Last edited:

zigzag3143

Honorable Member
Microsoft MVP
Same deal, only makes it past the first pass.

Edit: I got another BSOD today "KERNEL_STACK_INPAGE_ERROR" and now I can't connect to the internet with the computer. It says I have a connection but no programs can utilise the connection.


Can you upload that DMP file to us?
 
Top