Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 124, {0, ffffe0009e047028, b0800000, 40151}
Probably caused by : AuthenticAMD
Followup: MachineOwner
Hi,
the dump files sent were bugcheck 3B and the above. Bugcheck 3B can be caused by system service issues, graphic driver issues and driver issues. Bugcheck 124 on the other hand is usually caused by a hardware error typically overheating. Looking over the dumps though i have a sneaking suspicion the issue lays elsewhere.
Security
I see your running both BitDefender and SuperantiSpyware:
avc3.sys Fri Oct 16 16:55:18 2015: BitDefender Active Virus Control filter driver
SASDIFSV64.SYS Fri Jul 22 00:03:00 2011: SUPERAntiSpyware
Please remove both and just use the onboard Defender as this super stable. See if the bsod stops.
If the bsod continues then you may want to consider updating your Bios
BiosVersion = P1.10
BiosReleaseDate = 11/02/2012
BaseBoardManufacturer = ASRock
BaseBoardProduct = 980DE3/U3S3
ASRock > 980DE3/U3S3 Please double check this is correct for your motherboard.
Your Bios version is first release and the later versions include compatibility updates for both RAM and CPU.
There is also an element of risk if the incorrect file is used or the machine is turned off during mid flash then it can stop the moBo from working correctly.
If your unsure about the process the leave it for now and we can always come back to it.
Please ensure Chrome is updated alongside any drivers
Just check your temps are ok by monitoring them at both rest and full load:
HWiNFO - Hardware Information, Analysis and Monitoring Tools Pay particular attention to cpu, gpu and system.
Also make sure you do not have a case full of dust bunnies by removing the side panel. If there is a lot of dust I find the fastest way to remove it is to use a vacuum cleaner and small paint brush. Basically just agitate the dust with the brush and use the flexible vacuum tube to suck it up.
Please post any new dump files