Pausing Your Boot Process

#1
On some newer systems (even home built), the function key message for entering Setup (or any other message) disappears before you get a chance to read it and some monitors are slow to display text when powering up the system, so you may have to reboot to read it again.
So, during the boot process, what ever message you want read when it comes up, PRESS the Pause/Break Key and when your done, PRESS Enter to resume the Boot Process.
Comes in handy if you have a fast boot process.
 


#2
You could use the "Pause/Break" key though. Just tap that to stop the screen, and press another key to continue; Repeat as necessary.:p
 


#3
You could use the "Pause/Break" key though. Just tap that to stop the screen, and press another key to continue; Repeat as necessary.:p
Did you read my post thoroughly?

So, during the boot process, what ever message you want read when it comes up, PRESS the Pause/Break Key and when your done, PRESS Enter to resume the Boot Process.
Comes in handy if you have a fast boot process.
Regards,

Don
 


Mike

Windows Forum Admin
Staff member
Premium Supporter
#4
This seems to be a major annoyance on Gigabyte motherboards.
 


This website is not affiliated, owned, or endorsed by Microsoft Corporation. It is a member of the Microsoft Partner Program.