Repeating BSOD

Discussion in 'Windows 8 Blue Screen of Death (BSOD)' started by mlkjhg, Oct 31, 2013.

  1. mlkjhg

    mlkjhg New Member

    Joined:
    Oct 31, 2013
    Messages:
    3
    Likes Received:
    0
    Hello,

    My laptop has been crashing repeatibly since I used it on monday, I've done every scan I could find on the internet, the only change I've noticed is that it now crashes every hour instead of every thirty minutes.
    I've done an analysis as mentioned on this site and here are the results.
    Can anybody take a looke at this, it would realy help me to know what the cause is.

    https://www.dropbox.com/s/kzqb278cxhas7v2/103013-21546-01.dmp
    https://www.dropbox.com/s/dcg2vd433hf9cgz/103013-29296-01.dmp
    https://www.dropbox.com/s/xswkss0dendja9u/103013-31218-01.dmp
    https://www.dropbox.com/s/ovz73zeda6a4puo/103113-28750-01.dmp
    https://www.dropbox.com/s/5vzzpnd4dzvo20q/103113-35062-01.dmp
    https://www.dropbox.com/s/zh0u77umuy2qnsf/103113-37125-01.dmp
    https://www.dropbox.com/s/gsw76z1pffzbv94/MEMORY.DMP

    I realy hope somebody can help me with this sice my laptop is only two weeks old and it took all my savings.
     
  2. Trouble

    Trouble Noob Whisperer

    Joined:
    Nov 30, 2009
    Messages:
    13,845
    Likes Received:
    833
    Code:
    CRITICAL_STRUCTURE_CORRUPTION (109)
    This bugcheck is generated when the kernel detects that critical kernel code or
    data have been corrupted. There are generally three causes for a corruption:
    1) A driver has inadvertently or deliberately modified critical kernel code
    or data. See http://www.microsoft.com/whdc/driver/kernel/64bitPatching.mspx
    2) A developer attempted to set a normal kernel breakpoint using a kernel
    debugger that was not attached when the system was booted. Normal breakpoints,
    "bp", can only be set if the debugger is attached at boot time. Hardware
    breakpoints, "ba", can be set at any time.
    3) A hardware corruption occurred, e.g. failing RAM holding kernel code or data.
    Arguments:
    Arg1: a3a01f58936d25ab, Reserved
    Arg2: b3b72bdee5ec5c26, Reserved
    Arg3: ffffe00002a92a00, Failure type dependent information
    Arg4: 000000000000001c, Type of corrupted region, can be
        0 : A generic data region
        1 : Modification of a function or .pdata
        2 : A processor IDT
        3 : A processor GDT
        4 : Type 1 process list corruption
        5 : Type 2 process list corruption
        6 : Debug routine modification
        7 : Critical MSR modification
    The first thing you should probably do is remove daemon tools (sptd.sys 10/11/2009). Go here and grab the correct version for you architecture. Run the program and click the UNINSTALL button.
    Then turn off Driver Verifier and see if Blue Screens persist. If so....
    Since your computer "is only two weeks old" I would suggest contacting the vendor and make arrangements to take advantage of the system's warranty, either with a replacement or a refund.
     
  3. mlkjhg

    mlkjhg New Member

    Joined:
    Oct 31, 2013
    Messages:
    3
    Likes Received:
    0
    I've tried what you said and i am happy to report that my laptop hasn't crashed for over two hours, I will report it when it crashes or after 48 hours if it still hasn't crashed by then
     
  4. mlkjhg

    mlkjhg New Member

    Joined:
    Oct 31, 2013
    Messages:
    3
    Likes Received:
    0
    The BSOD hasn't returned.
    Thanks a lot, now I can finaly use my laptop again without saving every 5 seconds
     

Share This Page

Loading...