Identify whether you need collated or uncollated copies
Collation controls how multiple copies of a multipage document are grouped:
| Setting | Two copies of a three-page document | Use it when |
|---|---|---|
| Collated | 1, 2, 3 — 1, 2, 3 | Each person needs a complete document |
| Uncollated | 1, 1 — 2, 2 — 3, 3 | You want matching pages grouped together |
If your printer produces all copies of page 1 before moving to page 2, choose Collated. If that page-by-page grouping is what you actually want, choose Uncollated instead. These are different output arrangements, not necessarily evidence of a printer fault.
Collation is not the same as reverse page order. A printer producing complete sets in reverse order has a different problem from one grouping identical pages. HP, for example, documents Collate and Page order as separate controls. Do not change both during the same test, or you will not know which setting affected the result.
Prepare a small, controlled print test
Before changing defaults or drivers, prepare the following:
- A document with three clearly identifiable pages, preferably marked Page 1, Page 2, and Page 3.
- Enough paper for two copies.
- The exact printer name selected in the affected app.
- A note or screenshot of any preferences you intend to change.
For this diagnostic test, use ordinary single-sided printing with one document page per sheet. Temporarily avoid booklet printing, stapling, or other finishing features so you can inspect the page sequence without those additional variables.
The test below is a diagnostic recommendation: its purpose is to compare the same small job after each change. Do not send a large batch until the six-page test produces the arrangement you need.
1. Set collation in the app that sends the document
Start in the application rather than Windows Settings. Brother’s driver documentation explains that application copy-count and collation settings will usually override corresponding driver settings. Changing only the printer default can therefore leave the original problem untouched.
In desktop Microsoft Word
- Open the three-page test document.
- Select File > Print.
- Under Printer, select the physical printer you intend to use.
- Set Copies to 2.
- Under Settings, locate the control showing Collated or Uncollated.
- If it shows Uncollated, open it and select Collated.
- Check the preview to confirm that the intended pages are included.
- Select Print.
Microsoft documents Word’s File > Print workflow, printer selection, preview, and copy count; St. Cloud State University’s Windows printing instructions document the Collated/Uncollated selection within Word. No Windows restart is part of this print-setting change.
In another application
- Open the application’s Print command.
- Select the correct printer.
- Set the requested number of copies.
- Look for a Collate checkbox or a Collated/Uncollated choice.
- Enable collation for complete document sets.
- If the app does not expose that control, look for its printer Properties or Preferences button.
The names and availability of these controls depend on the application and installed driver. HP documents that print-dialog settings and printer-property settings are separate places to configure a job; there is no single universal app layout to follow.
2. Verify the output before changing Windows defaults
Collect the entire test job and check the grouping. The target for collated output is two complete three-page sets, not three pairs of identical pages.
Record the result:
- Two complete sets: Keep the working app setting and try the original document.
- Matching pages remain grouped: Continue to the printer preferences.
- Complete sets, but reversed: Investigate page order separately rather than changing collation again.
- The number of copies is wrong: Check where the copy count is being specified before repeating the test.
The grouping distinction follows the documented meaning of collation. Brother also warns for some drivers that the driver’s copy-count control is independent of the app’s control and should not be used simultaneously. For troubleshooting, enter the requested quantity in one place rather than independently requesting multiple copies in both.
3. Check the printer’s Windows 11 printing preferences
Before changing a printer default: Record its existing values. A preference changed here can affect subsequent jobs, while an application can still override it. Avoid changing paper trays, ports, sharing, security, or device accessories for a collation test. HP distinguishes default print settings from the printer’s broader configuration properties.
- Open Start > Settings.
- Select Bluetooth & devices > Printers & scanners.
- Select the same printer used in the app.
- Select Printing preferences.
Choose Printing preferences, not Printer properties, for the document-output options in this procedure. Brother documents both entries on the Windows 11 printer page.
- Find the driver’s collation option. Its location is model-specific:
- Brother documents Collate on the Basic tab for supported drivers.
- HP’s Smart Universal Printing Driver documents it on the Document tab.
- Enable Collate when you want complete sets.
- Save the change with OK.
- Return to the application and repeat the same two-copy test.
Do not assume every driver has the same tabs. In HP’s Smart Universal Printing Driver, Collate becomes available only when Copy Count is greater than one. That is a documented feature of that driver, not a Windows-wide rule. If you temporarily increase the driver copy count to expose the option, restore your normal default afterward.
If app-controlled collation still fails, consult the exact model’s documentation before trying driver-controlled collation instead. HP’s Smart Universal Printing Driver explicitly supports allowing the software program to control collation by setting the driver’s Collate option to Off. Consequently, “turn it on everywhere” is not a reliable universal instruction.
4. Update the printer driver if the settings do not work
Use this stage only after checking the app and driver preferences.
Before installing a driver: Save your work and record the printer model and connection method. On an organization-managed computer or shared print queue, ask IT before replacing the driver. Use Windows Update or the printer manufacturer’s official support site, not a third-party driver-download utility. Microsoft recommends Windows Update as the first driver-update method.
- Open Settings > Windows Update.
- Select Check for updates.
- Open Advanced options > Optional updates.
- If printer driver updates are listed, select the one matching your device.
- Select Download and install.
- After installation finishes, restart Windows. Microsoft’s hardware-driver guidance recommends restarting even if the update does not explicitly require it.
- Reopen the app, check its printer and collation selection, and repeat the six-page test.
If Windows Update offers no suitable driver, use the manufacturer’s support page for the exact model. Select a package compatible with Windows 11 and your PC’s architecture, then follow its installation instructions. Check Settings > System > About > System type if you are unsure which architecture you have. Restart if the installer requests it.
ARM-based PC exception: Microsoft documents that some ARM PCs cannot install printers through a manufacturer’s installer. Unless the manufacturer provides specific Windows-on-ARM instructions, use Settings > Bluetooth & devices > Printers & scanners > Add device instead. Do not repeatedly force an incompatible installer.
5. Reinstall the printer if an update does not resolve it
Removing and adding the printer is a later troubleshooting step, not a prerequisite for enabling collation. Microsoft documents reinstalling as an option when updating the driver has not resolved printing problems. It can prompt Windows to obtain a driver again, but it is not the same as proving that every old driver package has been deleted.
Before removal: Finish needed print jobs and record the printer’s name and connection details. If it is a workplace printer, stop here unless you have permission and the information needed to reconnect it.
- Open Settings > Bluetooth & devices > Printers & scanners.
- Select the affected printer.
- Select Remove and confirm.
- Make sure the printer is powered on and connected.
- Return to Printers & scanners and select Add device.
- Wait for discovery, then select Add device beside the correct printer.
- If it is not discovered, select Add manually and use the connection information appropriate to your printer.
For wireless discovery, Microsoft advises ensuring that the PC and printer are on the same network. If manual setup requires an address or shared-printer name you do not know, obtain it from the printer documentation or administrator rather than guessing.
After installation, select the newly added printer in the app, recheck Collated, and repeat the multipage test. A successful Windows test page checks basic printing, but your two-copy document is the relevant check for collation.
Troubleshoot missing controls or recurring wrong-order copies
Collate is missing or unavailable
First confirm that the document has multiple pages and that the requested copy count is greater than one. Then check the model-specific driver instructions: some drivers expose collation only after increasing the copy count, and available preferences depend on printer capabilities.
If a manufacturer’s driver will not install, check whether Windows protected print mode is enabled. Microsoft states that third-party printer drivers cannot be used while that mode is active, and custom features may instead be provided through a manufacturer’s Print Support App. Do not disable a security feature merely to expose a collation checkbox; ask the manufacturer or administrator for the supported configuration.
Only one app produces uncollated output
As a diagnostic comparison, print a small multipage document from another installed application to the same printer, using the same quantity and requested grouping.
If the second application succeeds, keep troubleshooting the original app’s print settings before replacing the printer again. Brother specifically directs users to the software vendor when collation remains incorrect after its driver settings have been adjusted.
Undo a preference change or recover after a driver update
To undo the preference changes, return to Printing preferences, restore the values you recorded, and select OK. Also restore any temporary copy count or single-sided setting in the app.
If the problem began immediately after a driver update, Microsoft documents this rollback route:
- Sign in with administrator permissions.
- Right-click Start and select Device Manager.
- Expand the category containing the printer.
- Right-click the affected device and select Properties.
- Open Driver > Roll Back Driver, if available.
- Choose a reason, confirm with Yes, and restart if prompted.
If rollback is unavailable or the printer cannot be reinstalled, contact the manufacturer or IT rather than removing unrelated print components.
Provide the printer model, Windows version, application name, connection method, and exact test result—for example, “requested two collated copies; received 1,1,2,2,3,3.” Include whether another app succeeds and whether the fault started after a driver change. Those observations give support a reproducible collation problem rather than an unspecified printing complaint.