Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck C9, {e, f, fffff980177a6c10, 0}
*** WARNING: Unable to verify timestamp for aswMonFlt.sys
*** ERROR: Module load completed but symbols could not be loaded for aswMonFlt.sys
Probably caused by : aswMonFlt.sys ( aswMonFlt+1aea )
Followup: MachineOwner
Hey,
you have quite a few different dump files which is usually a sign of hardware damage. The above is blaming Avast AV and I would have suggested installing MSE but as the Hard drive is down it's a bit pointless. Have you tried pressing F8 whilst booting to enter the advanced boot options? Once open try the setting 'Last good known configuration'. If you get into the system then run a chkdsk making sure you tick boxes to repair sectors.
What happened re the Memtest86 run? I reread your reply above but I couldn't find any results.
Oh and it does sound like your os could be corrupted by the damaged drive and it might not be a good idea to copy anything over.. Although with it being damaged you might not be able to anyway. If you had a backup taken before all this then fine but now I'd start afresh.