What arc-rebar does
Burlamaqui's tool turns on ReBAR for Arc GPUs on motherboards that never got a ReBAR option. It runs from the initramfs at every boot, before the GPU driver loads. It doesn't touch the BIOS, the kernel or Intel's drivers. That sets it apart from earlier workarounds such as ReBarUEFI, which has to be added to the motherboard's firmware.
Intel has long leaned on ReBAR for Arc. TechPowerUp notes that Intel once told Alchemist buyers without ReBAR to stick with other vendors. Its own B580 review also listed ReBAR as required for good performance. Older workstations, servers and pre-2020 desktops are the usual victims. Their firmware never gained the option, and nobody is going to ship a new BIOS for a 2015 board.
Why Linux can't resize the window on its own
The obstacle sits on the card, not just the motherboard. Arc cards contain an integrated PCIe switch. Its upstream port has an 8 MB BAR, which can stop Linux from expanding the GPU's memory window. arc-rebar writes the card's ReBAR register, then removes and rescans the root port. Linux then enumerates the card again and allocates the larger window.
TechPowerUp says Intel engineers have proposed a kernel-level fix for this issue, but it hasn't been merged yet. That fits the project's pitch. It is a stopgap that works from user space at boot, not a replacement for a proper kernel solution.
The reported results
The numbers come from one developer's test system. They are not an independent benchmark suite.
- Hardware: A Supermicro X9DRH-7TF with an Intel C602 chipset, dual Xeon E5-2670 v2 processors and 2015 BIOS firmware. The GPU was an Arc B580 12 GB, and the OS was Debian 13.
- Aperture: Before the workaround, the GPU exposed only 256 MiB of CPU-accessible VRAM. Afterward the system allocated a 16 GiB BAR window, making the card's full 12 GB accessible. The window is larger than the card's VRAM, but the B580 still has 12 GB of memory.
- Bandwidth: Measured memory bandwidth in a sample workload rose from 15 GB/s to 392 GB/s. A 4K Vulkan blur filter that had stalled ran at 39 to 50 FPS.
TweakTown adds a caveat. It stresses that these are compute-style workloads and that no proper gaming benchmarks have been published so far. I'd treat any claim of a gaming uplift as unproven for now. A 26x jump in a synthetic bandwidth test looks dramatic, but a CPU-to-VRAM transfer test is the best case for a bigger aperture. Real games will see something different.
Requirements and limits
The tool is not a universal fix.
- Above 4G Decoding is still needed, and the GPU must sit on its own root port.
- TweakTown reports that the motherboard needs enough MMIO space above 4 GB. That means no switches or risers between the card and the root port.
- It is built for Debian and Ubuntu, so Windows gamers won't benefit. TweakTown adds that it targets systems using initramfs-tools and recommends Linux kernel 6.12 or newer.
- Only Battlemage has been tested. The developer expects Alchemist to behave the same way. That is an expectation, not a verified result.
- Based on the project's own documentation as relayed in the coverage, the tool is a privileged boot-time change. It also depends on the
pci=reallockernel parameter. The documented flow is to run a diagnostic first and install only if it passes. After a reboot you run a verify step.
The cautious reading of the install guidance is to treat it like any low-level boot modification. Back up first and make sure you can reach the machine remotely if the display fails. Read the project's README and disclaimer before touching a production box. The maintainer warns that re-enumerating a root port can hang on chipsets that don't tolerate it. The tool is designed to carry on booting if the operation fails.
What it means for Windows readers
Windows users won't gain anything directly. A Windows install on the same hardware is unaffected. ReBarUEFI-style firmware injection remains the route for Windows on unsupported boards. It is riskier because it modifies firmware.
The wider point is cost. VideoCardz says this could let users install newer Arc GPUs in older systems without losing a feature Intel recommends for optimal performance. TechPowerUp suggests it could make Arc a viable option for older servers and workstations. That is a plausible niche: homelab boxes, media servers and transcode machines. It's a small niche, though. Arc was effectively off the table for such machines until now.
Bottom line
arc-rebar is a clever, narrowly scoped workaround. It is verified on one Battlemage card and one very old dual-Xeon board. The reported compute gains are large, and the gaming gains are unmeasured. If you run Linux on legacy hardware and have an Arc card stuck behind a 256 MiB window, it is worth a careful look. If you want Windows to see a bigger window, this tool won't help.
References
- New Linux Tool Brings Resizable BAR to Intel Arc GPUs on Old Motherboards - TechPowerUp TechPowerUp · 2026-10-25T16:40:01+00:00
- A Linux workaround gives Intel's Arc B580 ReBAR support on older motherboards - TweakTown TweakTown · 2026-10-25T21:23:16+00:00
- Intel Arc GPUs gain Resizable BAR support on older motherboards without BIOS mods - VideoCardz.com VideoCardz.com · 2026-10-25T13:39:37+00:00