A sleek home office desk features multiple computers, a glowing server tower, and a futuristic touch keyboard.
The headline on XDA Developers' piece oversells the idea. Clevetura S does not control four machines at once. It lets you pick one of four hosts at a time and send your typing and pointer input there. The distinction decides whether the keyboard suits a multi-machine desk, so here is the practical picture for Windows users and home-lab tinkerers.

A sleek home office desk features multiple computers, a glowing server tower, and a futuristic touch keyboard. What the setup is​

XDA Developers' Jasmine Mannan describes using a Clevetura S across a Windows desktop, a Mac workstation, a laptop and a headless home-lab server. Clevetura describes the S as a compact keyboard where touch and typing share the same keys, with 78 keys in Mac and Windows layouts. The company's FAQ says it pairs with up to four devices: one over USB and three over Bluetooth.

Yanko Design's October 2026 review puts the limit plainly. The three Bluetooth slots and the USB-C connection let you select between up to four devices, one at a time. That is a multi-host switching keyboard with a trackpad built into the keys. It is not a network KVM, and it does not share displays or move files between machines.

Why the wired port matters for a home lab​

The most useful point in the XDA account is about the home-lab server. Mannan reports that she plugged USB-C into that machine. Because the keyboard then acts as a standard wired input device, she says she got keyboard and pointer control in BIOS/UEFI menus and Proxmox consoles before any network or Bluetooth stack loaded.

The Proxmox and BIOS experience is the reviewer's own, and I could not confirm it in the manufacturer documentation. Clevetura's support page does say that on Windows the mouse works in BIOS. Treat this as a reasonable expectation for a wired HID device, not a guarantee for every motherboard or server.

A wired keyboard is also not out-of-band management. You still need a monitor or a remote console to see what you are typing into.

Windows, Mac and Linux are not equal​

The operating system you run changes what you get.

  • Windows: Yanko Design reports that Windows recognizes supported touchpad gestures without extra software, while TouchOnKeys adds settings such as per-app profiles. Clevetura's support page says Windows 11 gets one- to four-finger gestures, taps and pinch.
  • macOS: Clevetura says the S needs the TouchOnKeys app on a Mac. It also requires firmware v5.3.0 or newer and macOS 14 or later. Mannan's tip is to do an initial wired USB-C session with the app before pairing over Bluetooth. That sequence is her report, but the app and version requirements are confirmed by the company.
  • Linux: Clevetura's support page lists Ubuntu with GNOME on Wayland, or X.org with a gesture-improvement extension, as supporting typing, clicks, scrolling and three- and four-finger gestures. Zoom is not supported there. Other distributions may offer only basic touchpad behavior, so "works with Linux" does not mean feature parity.

Per Clevetura's own page, the TouchOnKeys app is available for Windows, Mac and Linux (x86, in Beta). XDA's piece says the utility is available on all three, which matches the manufacturer's listing.

Taming accidental gestures​

Touch sensors under the keys raise an obvious worry: will a typing hand move the cursor? Clevetura's firmware tries to separate typing from touch automatically. Its support material suggests these steps if you get unwanted input:

  • Update the firmware. Connect the keyboard by USB, make sure the USB channel is active, and let the TouchOnKeys app install it.
  • Run Adaptive Intelligence training. The keyboard picks a sensitivity level after studying 10,000 typed characters, and training needs the app plus a USB connection. On the S, the shortcut is Fn+Tab.
  • Adjust the level by hand if needed. Hold Fn+Tab and press 1 to 9 on the number row. A lower number means more sensitivity and more false gestures. A higher number means the opposite.
  • Disable or reconfigure three- and four-finger gestures if accidental swipes continue.
  • Change pointer speed in Windows touchpad settings.

Clevetura says the training data stays on the keyboard and is not sent to the app. That is a manufacturer statement, not an independent audit.

Where the pairing story gets less tidy​

XDA calls the four-host setup seamless, and that was its reviewer's experience. Clevetura's own support page is more cautious. It admits some users have Bluetooth pairing problems, often tied to specific adapters or modules. Its suggestions are:

  • Bring the keyboard close to the host while pairing.
  • Try a different PC, laptop, phone or tablet.
  • Move away from other wireless devices.
  • Temporarily unplug USB hubs, KVMs, docks and dongles.

Desktop users with a cheap Bluetooth dongle should plan for this. A multi-host keyboard is only as reliable as the weakest Bluetooth radio among your machines.

Precision and battery​

Mannan kept a regular mouse on her main PC for precision work. She says video editing and gaming still benefit from one. Yanko Design lists a learning curve and a premium price among its cons.

On battery, she cites roughly 40 hours of continuous use without RGB lighting. She says she got only a couple of days when travelling with lighting on. She also says the firmware has an 80% charge-cap mode for permanent wired use. These are the reviewer's figures and experience, not controlled tests. I could not confirm the charge cap in the manufacturer's support pages that I found.

Who should consider it​

This keyboard suits people who move between a Windows PC, a Mac and a server, and who want one compact board with one wired fallback for local console work. It is a weaker fit if you:

  • do precision pointing all day,
  • rely on Bluetooth hardware that has been flaky,
  • run an unusual Linux desktop and expect every gesture to work.

The XDA piece is a first-person account that links to a retailer, so weigh it accordingly. The manufacturer's documentation and Yanko Design's review support the core claims about connections and gestures. Four hosts, one input device, and one wired path into a BIOS screen is a clear benefit. "Controls everything at once" is not what this keyboard does.


Correction (November 20, 2026): An earlier version of this article said Clevetura's page listed the TouchOnKeys app for Windows and Mac only, with a Linux version coming. Clevetura's page actually lists the app as available for Windows, Mac and Linux (x86, in Beta), so XDA's statement that the utility is available on all three was correct.

 

References

  1. One device now controls my PC, home lab, Mac, and laptop at once XDA 2026-11-20T14:00:21+00:00
  2. Clevetura S Touch-on-Keys Keyboard, Compact 78 Keys clevetura.com
  3. What is the difference between Clevetura 1, Clevetura 1 for Mac, and Clevetura S? clevetura.crunch.help