The sensible approach is to start with Windows, understand what its readings mean, and reach for a dedicated utility when you need more detail. A health percentage is an indicator, not a warranty against tomorrow.
How to check SSD health in Windows
For a supported NVMe SSD on Windows 11:
- Open Settings.
- Select System > Storage.
- Expand Advanced storage settings.
- Open Disks & volumes.
- Select Properties for the disk you want to inspect.
Look for Estimated remaining life, Available spare, and Temperature. Microsoft’s Windows 10 instructions instead use System > Storage > Manage disks and volumes, followed by the disk’s Properties.
These readings describe estimated endurance, remaining reserve capacity as a normalized percentage, and overall device temperature in Celsius. If they are missing, do not interpret their absence as either a clean bill of health or proof of failure—first consider the monitor’s device-support boundary.
Remaining life is not a failure countdown
Microsoft’s NVMe health-log documentation defines Percentage Used as a manufacturer-specific estimate of endurance consumed, based on usage and the manufacturer’s prediction. Reaching 100% used means the estimated endurance has been consumed, but does not necessarily mean the drive has failed; the counter can exceed 100.
That distinction matters. An endurance estimate does not establish an exact failure date, nor should an individual percentage be translated into an exact number of terabytes written without drive-specific evidence. The NVMe log records host writes separately.
Think of endurance and errors as different questions: “How much estimated life has been consumed?” is not the same as “Has the controller detected unrecoverable data errors?”
Where CrystalDiskInfo still earns its place
CrystalDiskInfo’s publisher, Crystal Dew World, describes it as an HDD/SSD utility with support for some USB, Intel RAID, and NVMe configurations. It also documents interface, firmware, power-on hours, and S.M.A.R.T. information. That makes it useful when you want more than Windows’ compact overview, although device and connection compatibility still matter.
For NVMe diagnostics, two particularly useful fields are:
- Media and Data Integrity Errors: Microsoft defines the underlying media-error counter as occurrences of unrecovered data-integrity errors, including uncorrectable ECC, checksum failures, or logical-block-address tag mismatches.
- Critical Warning: A set of current warning flags covering conditions such as insufficient spare capacity, temperature thresholds, degraded reliability, or read-only media. These flags are not a permanent incident history.
Neither field is a crystal ball. Their value is that they answer questions an endurance percentage cannot.
A warning means protect the data first
Microsoft identifies low spare capacity, degraded reliability, and read-only operation as critical storage warnings, and recommends backing up data when a warning appears.
Do not make CHKDSK a prerequisite for that backup. Microsoft documents CHKDSK as a file-system and metadata checker: /f repairs logical errors, while /r searches for bad sectors and attempts to recover readable information. On SSDs, marking clusters bad is a logical operation, not physical remapping. A successful file-system repair therefore should not be treated as proof that a hardware warning has been resolved.
The practical order is straightforward: preserve important files, investigate the reported condition, then decide whether repair or replacement is appropriate. Troubleshooting is useful; gambling the only copy of your data on it is not.
The bottom line
Windows Settings is a sensible first stop for a compatible NVMe SSD. CrystalDiskInfo remains useful for broader device coverage and deeper telemetry. Neither deserves to replace a backup plan: use the readings to inform your decisions, not to postpone protecting your files.
References
- You don't need CrystalDiskInfo to check your SSD health, as Windows already tells you a lot XDA · 2026-10-25T00:00:20+00:00
- NVME_HEALTH_INFO_LOG - Win32 apps | Microsoft Learn learn.microsoft.com
- What to do about a critical warning for a storage device | Microsoft Support support.microsoft.com