A laptop’s network adapter settings show “Prefer 5GHz,” alongside a router and illustrations comparing 2.4GHz and 5GHz Wi‑Fi.
A Lenovo Legion 5 Pro sat one room from its router. On a connection that gives a desktop PC more than 400 Mbps, the laptop managed only 93 Mbps down and 37 Mbps up. The writer at XDA Developers, Abhinav Raj, traced the problem to the Wi-Fi band. Windows was joining the router's 2.4GHz band even though 5GHz was available. A single Device Manager dropdown changed that. This is one person's test on one laptop, but the diagnosis and the fix apply to many Windows PCs.

A laptop’s network adapter settings show “Prefer 5GHz,” alongside a router and illustrations comparing 2.4GHz and 5GHz Wi‑Fi. What happened on that laptop​

Raj's router broadcasts both bands under one network name. His MediaTek Wi-Fi adapter picked 2.4GHz on four of five reconnects. The 5GHz band reached the table without trouble.

A netsh scan showed why the choice looked reasonable. The 2.4GHz band read 81% signal at the table, against 66% for 5GHz. Lower frequencies lose less strength through walls, so 2.4GHz wins a signal-strength comparison from the next room.

Signal strength is not capacity, though. These are the link figures Raj reported:

  • On 2.4GHz, Windows showed a 300 Mbps link over 802.11n.
  • In another room, the same laptop had linked on 5GHz at 866.7 Mbps over 802.11ac.
  • Of 40 networks visible from the table, 26 were on 2.4GHz.
  • Eight of those were on channel 11, which he says overlaps his router's channel 13.

He attributes the 93 Mbps result to a crowded 2.4GHz band. That explanation is specific to his neighborhood, not a universal rule. Link rates are best-case figures and are not measured throughput. A speed test also measures the router, the ISP and the test server.

What Microsoft says about band selection​

The fix was changing Preferred Band from No Preference to Prefer 5GHz band. Microsoft's own documentation explains the background. Its Wi-Fi guidance says some networks show one name but contain several bands, and that Windows connects automatically to the best available band. The same page lists the trade-offs:

  • 2.4GHz has longer range and passes through walls better, but is slower and more congested.
  • 5GHz is faster, has more non-overlapping channels and is less congested. It has shorter range and handles walls worse.
  • Microsoft recommends separate network names for each band if you want to know which one you are on.

"Best" is decided by Windows and the driver, and it is not always the fastest option. Raj's account is that his MediaTek driver followed signal strength. How other adapters weigh the choice isn't established here.

How to fix it​

1. Check which band you are on​

Open Command Prompt or PowerShell and run:

netsh wlan show interfaces

Microsoft documents this command for Windows 10 and Windows 11. Look at the radio type and band or channel fields. Output varies by adapter and driver. If it shows 2.4GHz and you know the adapter supports 5GHz, continue.

2. Survey nearby networks (optional)​

Microsoft's wireless troubleshooting guidance recommends netsh wlan show networks mode=bssid. It adds BSSID, signal strength, channel and radio type for each visible network. That shows which bands and channels are crowded. If you are unsure the adapter supports 5GHz, netsh wlan show drivers lists driver properties, and Microsoft includes it in its baseline data collection.

3. Set the preferred band​

  1. Right-click Start and open Device Manager.
  2. Expand Network adapters and double-click your Wi-Fi adapter.
  3. Open the Advanced tab and select Preferred Band in the Property list.
  4. Change the value from No Preference to Prefer 5GHz band, then click OK.

Raj says the Wi-Fi drops for a few seconds as the driver resets. Other guides also describe a restart, so reboot if the change doesn't seem to take effect.

4. Confirm it worked​

Reconnect a few times and rerun netsh wlan show interfaces each time. Raj saw 5GHz on five of five reconnects after the change, against one of five before. Then run the same speed test, from the same spot and against the same server, as before. Microsoft advises taking a baseline speed test before making changes and repeating it afterward.

If you can't find the setting​

This setting is provided by the Wi-Fi adapter driver, not by Windows itself, so names and choices vary. Raj also says not every card lists it under that name. Some things to try:

  • Look for a similarly named property, such as Preferred Frequency Band, Band or Wireless Mode. Naming varies by vendor. Wording from one how-to guide, so treat the exact names as examples.
  • A missing band property can mean the adapter doesn't support 5GHz at all. One older guide says as much.
  • Old drivers may hide band options. Installing the current driver from the PC or adapter maker, rather than relying only on Windows Update, is a common recommendation in how-to guides.
  • Give the router's bands separate names and join the 5GHz one directly. This is Microsoft's own advice, and it needs no driver setting.

No setting can add a band the adapter or access point doesn't support. Windows can only connect to 5GHz when the router broadcasts it and the signal is strong enough.

Preference versus lock​

Raj's adapter also has a Band Selection option that can lock the connection to 5GHz. He advises against that on a laptop because it leaves no fallback when 5GHz doesn't reach. A preference lets the laptop drop to 2.4GHz at the edge of coverage. The exact behavior of both options depends on the adapter and driver. If Wi-Fi stops working after you change an advanced property, set it back to No Preference or Auto first.

What the numbers show, and what they don't​

On the same Speedtest server and from the same spot, Raj reports these results:

Metric2.4GHz5GHz
Average download93 Mbps222 Mbps
Average upload37 Mbps128 Mbps
Latency under upload load357 ms121 ms

He also says his slowest 5GHz run beat his fastest 2.4GHz run. Upload gains matter to him because the laptop serves media to other devices at home.

These are the author's measurements. This was not a controlled lab test, and your results will depend on your router, walls, neighbors and adapter. The headline claim that Windows was "halving" his speed describes this case only. A 5GHz-preferring setting can backfire in a house where 5GHz is weak, so test before and after.

Takeaway​

Before replacing an ISP, check which band the laptop is actually using. If it is on 2.4GHz with a 5GHz-capable adapter, a Preferred Band setting costs nothing to try. If the setting is missing, split your router's band names and join the 5GHz network directly.

 

References

  1. Windows was quietly halving my laptop’s Wi-Fi speed, and one hidden setting fixed it XDA 2026-11-20T17:00:22+00:00
  2. netsh wlan | Microsoft Learn learn.microsoft.com
  3. Wireless network connectivity issues troubleshooting - Windows Client | Microsoft Learn learn.microsoft.com