What QNAP announced
The lineup is the 8-bay desktop TL-D810TC4 and the 12-bay rackmount TL-R1210TC4-RP, with up to 40Gbps of theoretical bandwidth. QNAP's newsroom release is dated October 20, 2026. QNAP says the JBODs and the expansion card are available now. The QXP-40G2UC card is the third product.
A JBOD ("just a bunch of disks") is a box of drive bays with no computer inside. It has no CPU, no network stack and no Ethernet port. It plugs into a host, either a PC or a NAS, and shows up as extra storage. These are direct-attached storage units, not NAS devices.
The two enclosures
| TL-D810TC4 | TL-R1210TC4-RP | |
|---|---|---|
| Form factor | 8-bay desktop | 12-bay, 2U rackmount |
| Max raw capacity (QNAP's figure) | 208TB (8 × 26TB) | 312TB (12 × 26TB) |
| Host OS support listed | QNAP NAS, Windows 11 or later, macOS 12 or later, Ubuntu 22.04 or later | QNAP NAS, Windows 11 or later, Ubuntu 22.04 or later |
| Power | 250W supply | Dual 250W redundant modules |
| Standard warranty | 2 years | 3 years |
Both enclosures take SATA drives, and QNAP lists 3.5-inch and 2.5-inch HDDs and SSDs. Both have one USB4 Type-C host port. Both also ship with a USB4 cable in the box. The enclosures are sold without drives.
The desktop model is aimed at creators doing 4K/8K video work and backups. The rackmount model is aimed at server rooms and SMB backup. QNAP's product page says its dual power modules are meant to keep it running without interruption. An optional RAIL-B02 rail kit fits standard 19-inch racks.
Compatibility: the part that will bite you
The most useful detail is a negative one. QNAP says the TL-D810TC4 works only with USB4 and Thunderbolt 4 ports, and that USB 3 and earlier versions are not supported. A USB-C connector on your PC does not guarantee the box will work.
The port types differ by model:
- TL-D810TC4: USB4 for NAS, Windows PC and Mac. Thunderbolt 3 for NAS and Mac. Thunderbolt 4 for NAS, Windows PC and Mac.
- TL-R1210TC4-RP: USB4 for NAS and Windows PC. Thunderbolt 3 for NAS only. Thunderbolt 4 for NAS and Windows PC. QNAP does not list Mac support for this model.
Other points from QNAP's product pages:
- Connect the enclosure directly to the host. QNAP says not to put a USB hub or dock in between.
- QNAP recommends a USB cable no longer than 1 meter.
- To get the full 40Gbps and PCIe tunneling, the host must support USB4 or Thunderbolt 3/4. QNAP also says actual speeds depend on the device and cable.
- QNAP says units can be migrated only to other TL USB series JBODs, not to other JBODs or devices.
- Follow the power-on and power-off procedure in the manual, or performance may suffer.
Using one with a Windows PC
QNAP suggests using built-in tools such as Windows Storage Spaces to combine the drives into a software RAID. You can also run it in single-disk mode, where each drive is read and written independently. In that mode you can swap a full disk for a new one and reinsert old disks later to read them.
QNAP warns that a software RAID set up in one environment can't be used across different platforms. A RAID built under Windows should not be expected to mount on a QNAP NAS or a Mac. If you ship the unit to another site, as QNAP suggests for large transfers, it only works on a host running the same system.
For monitoring, Windows users can use QNAP's JBOD Manager. QNAP says it checks device health and fan speed, logs events, and sends desktop notifications when something goes wrong. Version 1.3 is current for Windows, according to QNAP.
The QXP-40G2UC card and NAS use
The card adds two USB4 Type-C ports to a compatible QNAP NAS. QNAP says it is designed for Intel- and AMD-based NAS models, subject to the QNAP Compatibility List. The product pages add that some NAS models need a minimum BIOS update when connecting through the card. So don't read "Intel and AMD NAS" as blanket compatibility. Check the list for your exact model first.
On a NAS, the enclosure can be an independent storage pool or run in external-disk mode. QNAP says it cannot be merged into the NAS's main pool, and system applications must stay on the NAS itself. The enclosures need QTS 5.2.x or later, or QuTS hero 5.2.8 or later.
How fast is it really?
QNAP publishes lab numbers, but treat them as vendor tests. For the TL-D810TC4, QNAP lists these results:
| Test | Read | Write |
|---|---|---|
| QTS RAID 0 | 2,976 MB/s | 2,236 MB/s |
| Windows RAID 0 | 2,734 MB/s | 2,272 MB/s |
| Windows RAID 5 | 2,720 MB/s | 717 MB/s |
Those figures come from QNAP's own table. QNAP's test setup used a TVS-h874T NAS with eight Samsung 870 EVO 1TB SSDs. The rackmount page lists a different setup: a TS-h2477AXU NAS with twelve Samsung 860 Pro 512GB SSDs. The numbers, including Windows RAID 5 write speeds of 849 MB/s on the rack unit, come from those setups.
Two things follow from that:
- These are SSD results. A set of spinning hard drives will be much slower. A single 3.5-inch HDD is nowhere near saturating a 40Gbps link, though a full array can add up.
- The write figures under RAID 5 on Windows are far below the read figures. That is typical of software parity RAID. Factor it in if you plan to use Storage Spaces parity for backup targets.
Pricing and retail
Retailer listings have appeared. A QNAP store snippet for the TL-D810TC4-US shows a price of $799 and an in-stock status. I could not confirm current pricing or stock for the rackmount model or the card, so check before you plan a purchase.
Who should care
- Windows 11 creators and workstation users: The desktop model offers a lot of bays without a NAS or network setup. Confirm your PC has a real USB4 or Thunderbolt 4 port first.
- Small server rooms: The 12-bay unit with redundant power is a plausible backup or archive target. It is still a single-cable, single-host design, not shared network storage.
- QNAP NAS owners: The card plus an enclosure can add capacity, but the added pool stays separate. Check the compatibility list and BIOS requirements first.
Bottom line
This is a solid addition for people who want large direct-attached capacity over USB4. The caveats are that USB 3 hosts are unsupported, direct connection is required, RAID doesn't travel across platforms, and the quoted speeds come from SSD lab setups. Check your port, your cable and your host OS before you buy.
References
- QNAP Unveils High Speed USB4 JBOD Enclosures and PCIe Card - Technetbook Technetbook · 2026-10-21T16:59:00+00:00
- TL-D810TC4 (USB 4) | 8-bay Desktop USB 4 Type-C JBOD | QNAP (US) qnap.com
- QNAP Launches High-capacity USB 4 Type-C JBOD Series with up to 12 Bays for Desktop and Rackmount Deployment | QNAP (US) qnap.com