What SCUF is selling
SCUF's product family has two models on one chassis. Notebookcheck reports that the line splits into the Nemesis Pro 8K PC Wired and the Nemesis Pro 8K PC Wireless. Pre-orders opened globally on 26 August 2026. The wired model is $119.99 and the wireless model is $199.99. Absolute Geeks also lists creator editions at $139.99 wired and $219.99 wireless.
Both models are built for Windows 10 and 11 and carry a one-year warranty. The headline hardware, per the review and SCUF's own listings:
- TMR (Tunnel Magnetoresistance) thumbsticks, which SCUF positions as its anti-drift design.
- Omron mechanical ABXY switches.
- Four rear paddles (P1–P4). The inner pair can be removed and replaced with blanking plates.
- Triggers with a back-mounted switch. One position gives a short, mouse-like click, and the other gives full analog travel.
- Three onboard profiles: Shooters (blue), Sport (red) and Racing (green).
- A rated battery life of up to 64 hours on the wireless model. That figure comes from the review and wasn't confirmed in the SCUF material I could check.
SCUF's wireless product page lists a weight of 258 grams. The wired page lists 211 grams.
The polling-rate caveat
Polling rate is how often the controller reports its state to the PC. At 1,000 Hz that's every millisecond, and at 8,000 Hz it's every 0.125 ms. SCUF's quick-start guide says both models support a configurable USB polling rate from 125 Hz up to 8,000 Hz.
Two details matter in practice.
It ships at 1,000 Hz. SCUF's guide states the default is 1K, and you change it in the Companion App. Absolute Geeks makes the same point: if you never open the app, you're paying for a feature you aren't using.
The wireless 8K figure has a condition. SCUF's guide says the wireless polling rate is limited to 4K while the app is open. To reach 8K wirelessly, make your changes in the app and close it before you start gaming. The guide says a future update will lift this limit. Wired mode isn't affected.
Absolute Geeks says the wireless model delivers 8K over both wired and wireless connections. That's true as a ceiling. But anyone who leaves the app running in the background, which is easy to do on Windows, will be capped at 4K wirelessly until SCUF ships a fix.
SCUF also says some games and applications don't support polling above 1,000 Hz. The review adds that very high polling uses more CPU time on older systems. That is the reviewer reporting the claim, not a measurement.
About the sub-1 ms claim
SCUF says 8K polling targets response times under one millisecond. Notebookcheck offers a useful reality check. That figure is the interval between the controller reporting to the PC. It isn't a measure of the whole input chain, since display, engine tick rate and network latency all add to it.
Absolute Geeks reports that aiming feels tighter and more direct. That is a subjective impression, and the review doesn't include instrumented latency testing. Treat the "eight times faster" implication as marketing. The real benefit is a faster reporting interval, and how much you notice depends on the game and the rest of your setup.
The Companion App and Windows requirements
SCUF's guide says the app is available on the Microsoft Store for Windows PC. The controller connects to Windows only. The app is also designed for mouse-and-keyboard navigation, so don't expect to drive it with the controller itself.
From SCUF's guide, the Settings menu lets you update firmware, calibrate, adjust the USB report rate and reset to defaults. The wireless model also shows battery status. The Profiles menu lets you edit mappings, stick deadzones, trigger deadzones and response curves. Settings are stored directly in the controller's memory, so no manual save step is needed.
Absolute Geeks describes more depth than the guide documents: 21 remappable inputs, named response curves (Exponential, Linear, Dynamic, Aggressive and Custom), and anti-deadzone and anti-drift options. I couldn't confirm those specifics in SCUF's guide, so treat them as the reviewer's account.
Version 1.1.1 is the current release according to a third-party software catalogue, which dates it to October 5, 2026. Wccftech's review shows that version running alongside controller firmware 1.1.6.
Setup guide
Getting to 8K wirelessly
- Plug in the dongle and set the switch on the back of the controller to the wireless position.
- Hold Power for 3 seconds until the status LED comes on. The controller should connect to the dongle automatically.
- If it doesn't connect, press the pairing button on the dongle until its light flashes. Then hold Power and View together on the controller until the status LED flashes.
- Install the Companion App from the Microsoft Store and open it.
- Set the USB report rate to 8,000 Hz, and apply any firmware or profile changes.
- Close the app before you start playing. Otherwise, per SCUF, wireless polling stays at 4K.
Remapping without software
Hold the Profile Button for 3 seconds to enter Hardware Remapping Mode. Press a paddle (or the Z button) together with the input you want it to copy. A white flash on the profile LED confirms the change. SCUF says you can map to A, B, X, Y, the D-pad directions, bumpers, stick clicks, triggers, View and Menu. Holding Power, Y and B for five seconds restores factory defaults.
Calibration
Hold Menu and View for 5 seconds to start hardware calibration. It runs through trigger and stick steps automatically, and you can't calibrate sticks or triggers individually. The triggers must be in full-throw mode, not instant mode. SCUF's guide says to recalibrate after swapping faceplates.
What the reviewer liked and disliked
These are Absolute Geeks' hands-on judgments, not lab results.
Praised:
- The hybrid D-pad, called one of the best on a premium controller.
- Smooth, precise TMR sticks.
- Crisp Omron button clicks.
- Paddles that let you keep your right thumb on the aim stick.
- A light, comfortable build.
Criticised:
- There's no rumble, which the reviewer misses in cinematic single-player games. They are happy to go without it for competitive play.
- The wireless model has no charging dock or carrying case at $199.99.
Existing Valor Pro faceplate kits are said to fit, per the review. SCUF's guide confirms the faceplate comes off to reach the D-pad, thumbsticks and anti-friction rings. The guide says a plastic pry tool isn't included for removing the rings.
Is the price justified?
The review argues that the extra money buys wireless 8K, a light build, onboard remapping, long battery life and faceplate compatibility. Casual players, it says, should look at cheaper pads or the wired model. The wired model keeps the same performance features but has no wireless.
Others agree on the value question. Wccftech notes that some competitors already offer similar functionality at around $100, which makes the $199 price a harder choice. Basic Tutorials goes further and says 8,000 Hz polling is no longer a unique selling point in the PC controller market. The "controllers around $100 with TMR sticks" claim in the review isn't backed by named products here, so compare current prices yourself.
Bottom line
- Wired buyers get the full feature set for $119.99 with no polling asterisk.
- Wireless buyers should set 8K in the app, then close the app before playing. Until SCUF updates it, leaving it open means 4K.
- Anyone expecting a measurable edge should remember that SCUF's sub-1 ms figure describes the reporting interval, not total system latency. This review is one reviewer's experience, not a benchmark.
Some SCUF listings have shown pre-order or back-order labels in the past. Check stock for your colour before you count on a delivery date.