That is why the feature is drawing attention. Windows Latest reports that Adobe, Battle.net, 1Password and Schoolyear are already testing the check. It also says developers can respond to a failed check in several ways, from showing a warning to refusing to run. If you switched off Memory Integrity for gaming performance or turned off Secure Boot at some point, it's worth knowing what this could mean for you.
What Microsoft actually announced
Microsoft announced the feature at Ignite 2026. Pavan Davuluri, Executive Vice President of Windows + Devices, wrote on the Windows Experience Blog that Windows baseline protection, now in preview in the Windows Insider Program, brings foundational protections like secure boot, virtualization-based security and memory integrity together into one verifiable security state. Microsoft says the feature serves three groups. People get better visibility into the security posture of their PC, and IT gets a clear yes-or-no answer for every device in the fleet. Application developers can use baseline protection to verify that the devices running their applications meet their security requirements.
The bar will also move over time. Microsoft says the baseline will continue to evolve as we raise the bar in security. We are proud to be collaborating with partners from across the ecosystem to see how Windows baseline protection helps meet their needs. Windows Latest quotes Dana Huang, Corporate Vice President of Windows Security, calling it "a single, versioned security state." Because the baseline is versioned, a PC that passes today could fail a future version. Microsoft has not published what later versions will require.
On timing: Windows Latest says general availability is planned for 2027. Microsoft's announcement and support page, as published, confirm only that the feature is in preview. They don't commit to a release date. For now this is an Insider feature.
Summary: Baseline protection is a preview feature that reports whether a PC passes or fails a set of security checks. Microsoft says the requirements will tighten over time. A 2027 general availability date has been reported but not confirmed by Microsoft.
The checklist: seven entries or eight?
Windows Latest counts eight protections because it lists two driver-signing rules separately. Microsoft's support page for Windows 11 combines those two rules into one entry, so its official list has seven:
| Protection (Microsoft's support page) | What it does |
|---|---|
| Security processor (e.g., TPM 2.0) | Protects sensitive information and helps confirm the PC started safely without tampering |
| Secure Boot | Checks software before Windows starts and allows only trusted software to load |
| Virtualization-based security | Creates an isolated area for important security tasks |
| Memory integrity | Checks drivers and system software before they run, so untrusted code can't get powerful access |
| Test signing protection | Keeps test-signing mode off, so development or untrusted drivers can't load |
| Kernel debugger protection | Keeps the kernel debugger off during normal use |
| Vulnerable driver protection | Blocks drivers with known security flaws |
Microsoft's support page says a device meets the baseline only when every required protection is active. If even one is off, or no longer meets the requirement, the device fails. Windows then shows which item needs attention.
The test-signing entry matters most to developers and hardware tinkerers. Microsoft's driver documentation says Windows does not load test-signed kernel-mode drivers by default. You enable them with bcdedit -set TESTSIGNING ON, which requires a restart. If Secure Boot policy blocks that command, the documentation says to disable Secure Boot in firmware, and it notes that BitLocker may also get in the way. With test signing on, Windows shows a "Test Mode" watermark on the desktop. A driver-development machine set up this way will fail the baseline on two counts.
A caution about dual-boot Linux: Windows Latest suggests that people who disabled Secure Boot to dual-boot Linux will fail. That's true if Secure Boot is actually off. Plenty of Linux distributions boot fine with Secure Boot on, though. Dual-booting by itself does not mean you fail. Turning Secure Boot off does.
How apps would use the result
Many security-sensitive apps already run their own checks. Windows Latest says Microsoft's announcement for developers, from Brandon Bray, Principal Group Product Manager for Windows, gives the examples of a banking app looking for a TPM and a game's anti-cheat checking driver signing. Baseline protection replaces those separate checks with one question.
According to Windows Latest, an app can get a simple yes or no, a list of the missing protections, or a hardware-backed attestation token that the developer verifies on its own servers. The token matters because a check that runs only on the PC is easier to fake. Windows Latest also reports that Microsoft lists five possible developer responses: allow the app, warn the user, lock a feature, reduce functionality, or block the app. It quotes Bray as saying, "The platform reports the state; you own the policy." Microsoft's support page doesn't yet document the API outputs in detail, so treat those specifics as reported, not confirmed.
What have the named partners said, according to Windows Latest?
- Schoolyear: Lead Security Engineer Gergely Homonnai says the company uses the API to confirm a student's PC meets the standard before an exam starts. This is the most obvious use case, since an exam platform has good reason to care about a tampered PC.
- Battle.net: VP of Engineering John Yaney says the check helps Blizzard raise its security bar while keeping friction low for players. That sounds more like quiet checks behind the scenes than a hard block.
- Adobe: Michael Draper, Vice President of Global Consumer Trust, says the feature works alongside Adobe's efforts to catch counterfeit and malicious software.
- 1Password is also reported to be testing it.
None of these companies has said it will block PCs that fail. Windows Latest itself notes this, and its headline about apps refusing to run describes something developers could do, not something any of them has announced.
Summary: Windows reports the result and each developer decides what to do with it. The partner details come from Windows Latest, and so far no partner has announced a block.
For IT admins: two different "baselines"
A separate admin-side product also arrived at Ignite. Microsoft's Tech Community blog announced Microsoft Baseline security mode 2026 as generally available, with coverage expanded to Purview, Intune, and Dynamics 365, with Azure and Windows in private preview. On the Windows side, Microsoft Baseline security mode expands to include three Windows settings, enable virtualization-based security (VBS), enable secure boot, and enable the security processor, now available in Private Preview.
That confirms Windows Latest's report that these three checks appear in the Microsoft 365 admin center. Windows Latest also says they are marked "Reporting only" and that the panel warns that turning on VBS does not turn on Memory Integrity or Credential Guard. That warning matters if you're planning a rollout. Fleets often have VBS enabled while HVCI is still off because of incompatible drivers. Microsoft's main announcement advises admins to deploy updates with Windows Autopatch, turn on Windows administrator protection and evaluate Windows baseline protection.
How to check your own PC
Microsoft's support page lists these steps:
- Open Settings.
- Go to Security. Windows Latest says this is now a separate page from Privacy.
- Select Baseline protection.
- If everything passes, nothing more is needed. Windows Latest reports a green "All protected" shield.
- If something needs attention, follow the guidance shown next to that item. Windows can turn on supported protections for you. Some changes need administrator rights, and all of them need a restart before they take effect.
- If the page says Pending restart, save your work and reboot.
You can't avoid the firmware step for Secure Boot. Microsoft says protections controlled by UEFI can't be changed directly from Windows, and the exact steps depend on your PC's manufacturer and model. According to Windows Latest, Windows shows a "Complete Secure boot setup" dialog with an Advanced restart button and a QR code, so you can keep the instructions on your phone while you're in the firmware menus.
Since this is a preview, the page may not appear on your PC at all yet. Geek Rewind notes that you can press Win+I to open Settings, then search for "baseline" in the search box. This is a Windows 11 preview feature, so it may not appear yet.
Common problems:
- The setting is greyed out or labelled as managed: your organization controls it. Contact your IT admin.
- Memory Integrity won't turn on: this is usually caused by an incompatible driver. Update or remove the driver it names and try again.
- Secure Boot appears unavailable: check whether your firmware runs in legacy/CSM mode or whether your disk uses an MBR partition layout. Secure Boot needs UEFI boot, so switching may require converting the disk. Back up your data first.
- Test Mode watermark on the desktop: run
bcdedit -set TESTSIGNING OFFfrom an elevated prompt, then restart.
Analysis: who should be worried?
For most people with recent hardware, probably no one. Windows 11 already required TPM 2.0 and Secure Boot-capable hardware, and newer PCs ship with Memory Integrity turned on. The people most likely to fail are gamers who switched off Memory Integrity for performance, users with older or unusual drivers, developers, and people running virtual machines without a virtual TPM or Secure Boot.
The bigger change is that your PC's security settings could start deciding which apps work well on it. Locking out cheaters and tampered exam machines is a reasonable goal. A creative app quietly cutting features because of an old audio driver is not. Baseline protection itself is a reporting tool, and how apps use it will be up to each developer. Until any of them publishes a policy, the practical steps are to open Settings > Security > Baseline protection, see what it says, and fix what it flags before an app tells you to.
Update: Microsoft confirms 2027 rollout plan and expands the official baseline list (November 18, 2026)
Microsoft’s Windows IT Pro Blog now explicitly says Windows baseline protection is planned for general availability in 2027, confirming the timing that had previously been reported but not committed to in the earlier public documentation.
The post also separates two driver requirements—“Signed drivers only” and “Windows-certified drivers”—into distinct criteria. That makes the first baseline an eight-item list in Microsoft’s latest description, rather than seven combined entries. Microsoft says the state is measured at boot through the security processor, and disabling any requirement requires a restart.
For admins, Microsoft adds that baseline protection can be reported through Intune, used in compliance policies as a condition of access, and monitored for configuration changes that weaken a device. Microsoft also names third-party management tools as a supported management path.
The partner list has expanded as well: Raycast is now identified as an early testing partner alongside Adobe, Battle.net, 1Password, and Schoolyear. Microsoft continues to stress that apps—not Windows—choose whether a failed baseline merely triggers a warning, limits features, or blocks access.
References
- A verifiable security state with Windows baseline protection Windows IT Pro Blog · Tue, 17 Nov 2026 18:15:58 GMT
- Stay Protected with Windows Baseline Protection | Microsoft Support support.microsoft.com
- Ignite’26 Spotlight: Announcing Microsoft Baseline security mode 2026 General Availability techcommunity.microsoft.com