Treat this as a quick post-update check. Compare each setting with what you chose on purpose, and change only what is actually different. Some of these settings were left at their defaults on purpose, and one of them is a security protection.
The November 2026 update
Microsoft's Windows 11 release-health page lists the November 10, 2026 security update as KB5132061. It covers three versions:
| Windows 11 version | November 2026 "B" build |
|---|---|
| 26H2 | 26300.9974 |
| 25H2 | 26200.9974 |
| 24H2 | 26100.9974 |
Microsoft's notes for this release highlight security fixes, a wider rollout of Secure Boot certificates to more eligible devices, and a fix for some USB Audio 1.0 devices that failed with Device Manager error code 10. The official material reviewed for this article does not say that a setting gets reset.
The Memory Integrity claim is different. Windows Latest published an article headlined "Windows 11 is now force-enabling Memory Integrity, a feature Microsoft admitted can hurt gaming performance, and here's how to turn it off," and its screenshot caption says Memory Integrity was turned on by default in a Windows 11 PC with November 2026 update. A separate MakeUseOf report says the Windows 11 Nov 2026 update auto-enables Memory Integrity (HVCI) on more eligible PCs. Both are press reports. They are not Microsoft documentation. Note the wording "more eligible PCs." That is narrower than the claim that every update turns the feature back on.
Bottom line: two outlets report that the November update switched Memory Integrity on for some PCs. The other reset claims are stories from readers and writers, not documented changes. Check your own settings rather than assuming any of them changed.
1. Power mode, power plans and sleep timers
MakeUseOf suggests searching for Choose a power plan to confirm that a custom or hidden plan is still active. That Control Panel page still exists on many PCs. On Windows 11, though, Microsoft's main controls are under Settings > System > Power & battery:
- Power mode: Settings > System > Power & battery > Power Mode
- Energy saver: Settings > System > Power & battery > Energy saver
- Screen and sleep: Settings > System > Power & battery > Screen, sleep & hibernate timeouts. Use the Turn my screen off after and Make my device sleep after menus.
Power mode is not the same thing as a classic power plan, so check both if you use a custom plan.
Microsoft's published defaults can tell you whether your timers were reset. Microsoft lists these sleep values:
| Device type | Sleep on battery | Sleep when plugged in |
|---|---|---|
| Modern standby devices | 3 minutes | 5 minutes |
| S3 devices | 10 minutes | 15 minutes |
Suppose you set a desktop to sleep after an hour and it now sleeps after 15 minutes. That suggests the timer went back to the default. If your values are the ones you chose, nothing changed.
2. Startup apps and default apps
MakeUseOf says apps such as OneDrive and Xbox can start launching at boot after an update. Microsoft gives three places to check startup programs:
- Settings > Apps > Startup. Each toggle controls whether that app starts when you sign in.
- Task Manager > Startup apps tab. This shows the same list plus each app's startup impact. Microsoft rates an app High if it uses more than 1 second of CPU time or more than 3 MB of disk activity at startup. Low means under 300 milliseconds of CPU time and under 292 KB of disk activity.
- Startup folders. Some apps don't register a startup task, so they won't appear in either list. To see them, type
shell:startup(current user) orshell:common startup(all users) in the Run box.
Some apps also start from registry Run keys, which Microsoft documents under HKCU and HKLM\Software\Microsoft\Windows\CurrentVersion\Run. Microsoft warns that you should back up the registry before changing anything there.
For file associations, open Settings > Apps > Default apps. You can search by file type or link type, such as .pdf or https, or pick an app to see everything it opens. Check your browser, mail client, PDF viewer and video player.
MakeUseOf says Windows treats third-party associations as needing "repair." It offers no evidence or affected builds, and Microsoft's documentation describes only how to view and change defaults. Check the associations you rely on and correct any that changed.
3. Memory Integrity: check it, then think before turning it off
Microsoft says Memory Integrity, also called Hypervisor-protected Code Integrity (HVCI), makes it harder for malicious programs to use low-level drivers to take over a PC. It runs in an isolated environment created by hardware virtualization, which must be enabled in your UEFI or BIOS.
To check it:
- Open Windows Security.
- Go to Device security and select Core isolation details.
- Look at whether the Memory integrity toggle is On or Off.
If you change it, restart the PC. Techdows' walkthrough says to flip the Memory integrity switch, and restart the PC. NinjaOne notes that you need administrator rights to change the setting.
About the gaming claim: MakeUseOf says Memory Integrity can cut gaming FPS ~5–10%. The Microsoft documentation reviewed here gives no such figure, and the real impact depends on your hardware and games. Windows Latest also gives the counter-argument: if your games work fine, I'd recommend leaving it on. How-To Geek makes a similar case, saying turning it off may be worth the trade-off if you practice good digital hygiene when performance is seriously affected.
A sensible approach:
- No stutters or lower frame rates in the games you play? Leave it on.
- Measurable slowdowns after the update? Compare performance with it on and off before making a permanent change.
- Memory Integrity won't turn on because of an incompatible driver? Microsoft says to ask the device maker for an updated driver, or to remove the device or app that uses the incompatible driver.
- Work or school PC? Ask your IT team first. Changing a security baseline on a managed device without permission is a bad idea.
4. Privacy settings
MakeUseOf suggests reviewing diagnostic data, the advertising ID, app permissions and activity history. Here is what Microsoft says each control does in Windows 11.
- Diagnostic data: Go to Settings > Privacy & security > Diagnostics & feedback. Required data covers the device, its settings and capabilities, and whether it is working properly. You cannot turn it off. Optional data can include websites you browse, device activity and enhanced error reporting. If the options are greyed out, your organization probably manages the device.
- Advertising ID: Go to Settings > Privacy & security > Recommendations & offers. Turning off the advertising ID does not reduce how many ads you see; they may just be less relevant. It also applies only to Windows apps that use that identifier. It does not affect cookies or other tracking methods.
- Personalized offers: Go to Settings > Privacy & security > Personalized offers. On older builds this setting may still be called Tailored experiences.
- Activity history: Go to Settings > Privacy & security > Activity history. Microsoft says KB5034204, released in January 2024, removed the option to send activity history to Microsoft on Windows 11 22H2 and 23H2. On current Windows 11 versions, this setting controls history stored on the PC itself.
These settings limit some data collection, but no single switch stops it all.
5. Services you disabled on purpose
MakeUseOf mentions Delivery Optimization, Mobile Hotspot, Windows Error Reporting, Compatibility Assistant Service and SysMain as services people often disable. It suggests opening the Services app and checking the Status and Startup Type of each one you turned off.
The source shows no evidence that the November 2026 update changed these services. Treat this as a list of examples, not a recommendation to disable them. A more reliable approach is to save a record of your settings before you patch. In PowerShell, run Get-Service | Select-Object Name, StartType, Status | Export-Csv services-before.csv. Run it again after the update with a different file name and compare the two files. That way, you only change services you actually changed before.
6. Registry tweaks
MakeUseOf's examples include disabling the lock screen, adding apps to the right-click menu and turning off network throttling. It gives no registry keys or affected builds, so none are listed here.
The practical advice is to keep a record of what you changed:
- Keep a text file listing every key and value you have edited.
- Export each key before you change it with Registry Editor's File > Export or the
reg exportcommand. - After an update, check the keys on your list rather than searching through the whole registry.
The takeaway
Patch Tuesday updates are cumulative and change a lot of system files, so a quick check afterward makes sense. Use this order:
- Power mode, power plan and sleep timers
- Startup apps in Settings, Task Manager and the Startup folders
- Default apps for your browser, PDF viewer, mail and video player
- Memory Integrity: confirm its status and only turn it off if it is actually causing problems
- Privacy pages: diagnostics, advertising ID, personalized offers and activity history
- Services and registry tweaks, compared against your own records
Two outlets report that the November 2026 update turned Memory Integrity on for some PCs. That is something to check, not a reason to switch it off. The other reset claims are anecdotes, so check before you assume an update changed anything.
References
- Before you get back to work after a Windows update, check these settings - MakeUseOf MakeUseOf · 2026-11-20T12:00:17+00:00
- How to turn on/off Core isolation memory integrity in Windows 11 - Techdows techdows.com
- Windows 11's November update automatically turns on Memory Integrity and tanks your performance makeuseof.com