A laptop displays AirPods connection and noise-control settings, with the earbuds and charging case on the desk.
WPods is a free, GPL-3.0 app that brings AirPods controls to Windows 11. Its main selling point is that it does this without Test Mode and without turning off Secure Boot. That matters because AirPods on Windows have always had two problems. One is the missing feature set. The other is the audio mess that starts when you enable the microphone.

Some caveats apply. WPods is a young project. The "no Test Mode" claim is the developer's own, not the result of an independent audit. The installation also changes how Windows talks to your Bluetooth adapter.

A laptop displays AirPods connection and noise-control settings, with the earbuds and charging case on the desk. What was announced​

Ukrainian outlet dev.ua reported that Reddit user rimjoeh built WPods, a free, open-source program under the GPL 3.0 license that brings Apple AirPods features to a PC running Windows 11. The project's GitHub README gives the same description. It calls WPods a free, open-source app that brings your AirPods' features to Windows 11. The README also says WPods is independent and not affiliated with Apple.

The "Ukrainian" label comes from the dev.ua report. The repository material doesn't independently establish the developer's nationality. Its language list does include Ukrainian, for what that's worth.

The notable change is in the security requirements. The first public release, v0.1.0, warned that WPods needed Windows Test Mode on and Secure Boot off. The README now says older versions needed both, and the current version needs neither.

The Hands-Free problem WPods targets​

Many Windows users know this one. You connect Bluetooth headphones and music sounds fine. Then a call or game opens the microphone and the headset drops into the narrow, low-quality Hands-Free profile. Everything sounds like a phone call from 2004.

According to the README, WPods exposes the AirPods microphone to Windows as a separate input device. It appears under a name like "Headset (A2DP, AirPods Pro)". Music and game audio stay stereo instead of dropping to the lower-quality Hands-Free mode.

The README includes a per-pair setting called "Disable Hands-Free mode". With it on, audio stays stereo and the mic comes through WPods. With it off, there's a catch. An app that uses the Hands-Free mic can take over the AirPods mic. The WPods input then goes quiet until that app stops using it.

In practice, you may need to pick the WPods microphone in Windows sound settings or inside your calling or game app. This is my reading of how the setting works, not something the developer promises for every app.

What "no Test Mode" actually means​

This is the part to read carefully. "No Test Mode" does not mean "nothing changes on your system." The README says Setup does the following:

  • It requires Windows 11 x64. It also needs administrator rights to install.
  • WPods' background service takes over your Bluetooth adapter using WinUSB, which is built into Windows. It then hands the adapter back to Windows as a virtual adapter. The README says your existing Bluetooth devices keep working.
  • Setup silently installs usbip-win2, a set of Microsoft-signed USB/IP drivers by Vadym Hrynchyshyn (BSD 2-Clause). These provide the virtual Bluetooth adapter and the WPods microphone.
  • If .NET 10 Desktop Runtime or Microsoft Edge WebView2 Runtime are missing, Setup downloads them. The README says it runs them only if they are signed by Microsoft.

The README says the changes are reversible. Uninstalling returns the adapter to Windows' own driver. The service also does this automatically if the takeover fails three times within ten minutes. The project is provided "as is", with no warranty, and it says you use it at your own risk.

So the accurate framing is that WPods avoids the need to weaken boot-time protections. It does not make the machine more secure. It still changes how the Bluetooth stack is wired, using signed third-party components.

Those drivers deserve the same scrutiny as any other kernel-adjacent component. Microsoft signing means the drivers passed Windows' signing requirements. It is not an endorsement of the project or an audit of the code.

Features by category​

The README says features appear only when your AirPods model supports them. Here is the supported scope.

Models: AirPods (1st, 2nd and 3rd gen), AirPods 4 and 4 with ANC, AirPods 5, AirPods Pro (1st gen), Pro 2 and Pro 3, and AirPods Max (1st gen and Max 2). Battery reporting works on all of them.

Connection and battery

  • Connect, disconnect and reconnect from the home screen.
  • Left, right and case battery with charging state. AirPods Max show one value.
  • Low-battery notifications.
  • Switching between multiple pairs.
  • A nearby popup with one-click connect. It works after you've connected the AirPods once.

Noise control and controls

  • Off, Transparency, Adaptive (on supported models) and Noise Cancellation.
  • Noise Cancellation and Adaptive need both AirPods in, unless you enable the one-AirPod option. That option is listed for AirPods 4 (ANC), AirPods 5 and all AirPods Pro.
  • Double-press speed, press-and-hold duration, which modes the hold gesture cycles through, and chime volume.
  • Ear detection that pauses audio when you remove an earbud.

Hearing and health

  • Conversation Awareness, with a "lower media to" level from 10% to 90%.
  • Personalized Volume.
  • Hearing Aid and Media Assist on AirPods Pro 2 and Pro 3. These use hearing settings you must first configure on an iPhone or iPad. WPods only switches the features on or off. Media Assist for calls works only when the call uses Hands-Free mode.
  • Heart rate from AirPods Pro 3 sensors. The README says it is not a medical device and is not for medical use.

Microphone processing

The mic modes are Standard, Voice Isolation and Wide Spectrum. The README says these are WPods' own processing. They are not Apple's. WPods runs open noise-suppression models locally on your PC and borrows Apple's names for the modes. It lists more than a dozen models, and each shows its processing weight and added delay. There is also a Raw option with no processing. Voice enhancement choices include Apple-inspired and two "Clear voice" options.

The mic modes are worth a reality check. Software noise suppression costs CPU and adds latency. The per-model weight labels are useful here. If you game and stream at the same time, a heavy model is a real trade-off.

The compatibility caveat​

This is the main limit on the hype. The README says WPods was tested on AirPods Pro 2 and Pro 3. The Bluetooth adapter was an Intel Wi-Fi 6E AX211 (USB ID 8087:0033). Other AirPods models and other adapters are described as supported but untested. The README names Realtek, MediaTek, Qualcomm and Broadcom. It also flags laptops where Bluetooth is part of a combined USB device.

dev.ua echoes this. The developer has mostly tested on Intel adapters and is asking the community to try other configurations and report back. The README's comparison table also notes that Hearing Aid was tested only on AirPods Pro 2 so far.

Because the install takes over your Bluetooth adapter, I'd treat this like any early-stage utility. Try it on a non-critical machine first, or at least make sure you know how to uninstall it.

How it compares​

The README includes a comparison table. It covers NTPods (two variants), LibrePods and MagicPods. It says it is based on each project's README, website and source code as of 2026-10-26. The table says MagicPods is paid with a trial and not open source, and that the older NTPods builds need Test Mode.

The table is the WPods project's own snapshot. The README also says "to our knowledge" WPods is the only AirPods app for Windows that offers every feature this way. dev.ua's wider claim that most similar programs force Test Mode and disabled Secure Boot is the developer's characterization. Treat both as claims, not independent findings.

There are also lighter tools. WinPods, a separate MIT-licensed project, shows AirPods battery levels in a movable widget, sends low-battery and connection notifications, and detects in-ear status. If you only want battery and notifications, that is a much smaller change to your system.

Installing and uninstalling​

The README gives these steps:

  1. Download WPods-Setup.exe from the latest release.
  2. Run it and accept the terms. They explain the Bluetooth adapter takeover.
  3. Choose your options. A desktop shortcut is off by default. Start with sign-in and automatic updates are on by default.
  4. Let Setup install .NET and WebView2 if missing. Restart if prompted.
  5. Open WPods and accept the welcome terms. Open your AirPods case near the PC (for AirPods Max, take them out of the Smart Case) and click Connect.
  6. If the AirPods aren't paired yet, use "Pair new AirPods" in the app. The guide says to open the lid, hold the back button until the light flashes white, then choose them in Windows "Add a device". You can also use "Open Bluetooth settings".

If the install fails, the README says to run Setup again. To remove the app, go to Windows Settings > Apps > Installed apps, find WPods and choose Uninstall. You can also choose whether to remove your settings. The default is No.

If you used an older, Test Mode version​

Setup offers to turn Test Mode off and suggests turning Secure Boot back on. The README warns that Windows may ask for your BitLocker recovery key after those changes. Have it ready before you start.

Reporting bugs​

The project asks bug reporters for a few details:

  • Adapter name and hardware ID: Device Manager > Bluetooth > your adapter > Properties > Details > Hardware Ids.
  • Windows version and build: press Win+R, type winver and press Enter.
  • Logs: the service logs are in C:\ProgramData\WPods\logs. The app logs are in %LOCALAPPDATA%\WPods\logs.

The README says the logs include device names and Bluetooth addresses. It says they never contain pairing keys, audio or anything you type. That is the developer's statement, not an audit. Check the logs before you upload them.

Bottom line​

WPods has a real, practical aim: stereo audio and a working mic on AirPods, plus the controls Apple keeps on its own platforms. The most interesting point is the install model. It avoids Test Mode and Secure Boot changes by taking over the Bluetooth adapter with signed USB/IP drivers. That is a different trade-off from the one older versions made. It is not a free lunch.

The project is young and shows about 13 stars on GitHub. Testing is limited to one adapter family and two AirPods models. If you have a different adapter, you would be one of the early testers. Know what the installer changes, keep your BitLocker key handy, and remember that uninstalling is the way back.

 

References

  1. A Ukrainian created WPods — a free utility for full AirPods operation on Windows 11 without compromising system security dev.ua 2026-11-16T10:25:00
  2. GitHub - FPNDev/wpods: A free, open-source app that brings your AirPods' features to Windows 11. · GitHub github.com