What was built
Tito, who runs the Macho Nacho Productions channel, announced the build on November 13. Foro3D reports that it uses a translucent green shell that recreates the original Xbox prototype from 2000, plus an ESP32-driven LCD screen showing 25th-anniversary animations. Tito's own post framed it this way: Xbox turns 25 and the official anniversary console is sold out, so he turned a Series S into the "perfect anniversary Xbox." He added that viewers can build one too. That is his stated motivation. The sources don't independently verify the sell-out.
The prototype it copies is the famous one Microsoft showed before the retail console launched. It was a huge block of machined aluminium with a glowing green orb in the middle.
How the conversion works
Reported details differ in depth between sources, so here is what each one says.
- Shell: Foro3D says PCBWay made the shell in transparent green, with internal rails that hold the Series S board and redesigned ventilation channels. TechEBlog adds that it uses copper threaded inserts and a clear center lens. It says the color matches Pantone 2259U.
- Why the Series S: TechEBlog says the smaller board and footprint fit the X-shaped shell much better than a Series X would.
- Assembly: According to TechEBlog, the process involves removing the console's outer casing, bottom plate and upper RF shield. The board then slides into the new shell on custom rails. A custom top cover has exhaust passages for the fan.
- Display: The ESP32-powered LCD replaces the prototype's glowing jewel. TechEBlog attributes it to Dark One Customs and says it draws power from the Series S front USB-C port. It also says the display can be adjusted wirelessly from a phone.
- Finish: The build ends with the front and rear frames bolted together and an anniversary sticker. TechEBlog says the finished console functions like a standard Series S, with hardware and software unchanged.
What isn't established
- Cooling: Neither source gives temperatures, airflow measurements or a thermal test. The shell was designed with ventilation features. Nobody has shown that it cools as well as the stock case.
- Performance: "Works like any other Series S" means the internals are unchanged. No benchmarks have been reported.
- Warranty and safety: The sources don't say whether Microsoft approves of this, whether a modified console keeps its warranty, or whether the shell has had any durability or safety testing. Opening a console and removing its RF shield is at the builder's own risk.
Files, cost and caveats
Nacho Engineering lists a "25th Anniversary XBOX Series S PROTOTYPE Shell." It is described as designed to fit Series S hardware inside the X-shaped enclosure. The listing offers two sizes:
- Large: This matches the build in the video and can accommodate the DVD drive for physical games.
- Original size: This is true to Microsoft's original and smaller than the video build, so it can't take the DVD drive.
That drive note matters if you own a disc-based console. The listing text I could see doesn't explain how the two sizes relate to the Series S in particular, so check the product page before buying. Foro3D calls the files public. The listing appears to be a product page, so don't assume the files are free or open-source.
On cost, TechEBlog says a resin print runs roughly $2,400. It also says builders can print the shell themselves in cheaper filament. That figure is the outlet's estimate. It isn't an itemized all-in cost, and it's unclear whether it includes the console, display or shipping.
Context
This isn't Tito's first prototype project. Last year he built a metal replica of the original Xbox prototype with real Xbox hardware inside. Developer StuckPixel wrote custom code for a Raspberry Pi Pico 2 to drive a circular screen in the center. The Series S build is the cheaper, plastic-shelled follow-up. It trades the mirror-polished aluminum for a see-through shell that shows off the board.
As Foro3D's closing quip puts it, the console still just plays games and generates heat. That is a fair summary. Nothing changes in how it runs, but now the heat comes with anniversary animations.
If you're tempted, treat it as a serious enclosure conversion rather than a skin:
- Read the exact product listing and parts list first.
- Confirm which console revision and drive configuration the files support.
- Plan for airflow and avoid blocking the vents.
- Accept that opening the console may affect your warranty.
References
- Xbox Series S transformed into the original Xbox prototype from 2000 - Foro3D Foro3D · 2026-11-18T14:06:09+00:00
- Tito Builds the Translucent Green Xbox 25th Anniversary Series S Microsoft Never Released - TechEBlog techeblog.com
- 25th Anniversary XBOX Series S PROTOTYPE Shell - nacho engineering nachoengineering.com