ocz

I have this happen daily seems to do something with memory i test with memtest overnight and it came up with no errors. CPU-Intel Core I7 870 Memory OCZ 4GB Motherboard gigabyte ga-h55m-u2dh Rev 1.0 Video Card Ati Radeon 5850

I am in need of help on this machine. It is a custom build with Win7 Enterprise 32bit. Mobo is ECS P4M800PRO-M ver 2.0, Cpu Pentium D 3.0, rma OCZ DDR400 pc3200, Video visiontec HD2600pro apg, hd 300gb maxtor 7200 16 mb sata that is the basics. It has an issue with freeze or lockup require hard...

Hi i hope this is correct section where to crate this help request. I received new computer. It has Asus Rampage 3 Extreem motherboard and OCZ SATA 2 (2.5) 120Gb SSD(empty as no windows installation on the drive). I am trying to install Windows 7 Professional to the SSD This is my BIOS setting...

I performed a successful clean install of Windows 7 Home Premium 64 bit. I installed the OS to a 100gb volume with the intention of using that only for the OS. I, without thinking, allowed the setup to name that drive C. Further, without noticing I allowed the Programs folder and the...

I recently purchased a new 60GB OCZ SSD for my old Inspiron E1505. However, when I tried to install Windows 7 on it, it always stops during the second step and gives me the error message "Windows cannot access the installation services. Verify that the installation sources are accessible and...

Hi all. I'm running Win7 Ultimate 64bit. This is my rig: CPU: Intel E8500 @ 3.45GHz (OC) RAM: OCZ Titanium 2x2GB @ 1152MHz FSB432x8.0 MB: Gigabyte EX38-DS4 (BIOS F3) GPU: ATI Palit 4870 1GB Dual Edition I have WD HDD 500GB Sata2 and WD HDD 160GB Sata1 for my videos and music only. The main HDD...

Im tryin to get my 64GB Mtron SSD runnin with Windows 7 but I can't get it to show up in the installation process. It shows just fine in the BIOS, in device manager, in My Computer and in Windows Disk Management, in fact I can even use it as storage but for some reason It will not show up as a...

Hello, I've recently built a computer with i7-860, MSI P55-GD65 and the OCZ DDR3 PC3-10666 (OCZ3P1333LV4GK) RAM. When I start up my computer, my BIOS says 1066MHz. I don't know how I can obtain 1333MHz speeds. Do I need to configure it somehow? Also, when I run MemTest, I start...

So, I was wondering which of them was worthy of upgrade? My actuall specs are Phenom Quadcore 9550, memmory: 2 GB DDR2-800 DDR2 SDRAM (5-5-5-18 @ 400 MHz) (4-4-4-12 @ 266 MHz) (3-3-3-9 @ 200 MHz) and 1 GB DDR2-667 DDR2 SDRAM (5-5-5-15 @ 333 MHz) (4-4-4-12 @ 266 MHz) (3-3-3-9 @ 200 MHz)...

Hi, I built a pc late last year. (not sure which specs you need) core i5 proc motherboard ASUS P6T DELUXE V2 1366 X58 RT VGA PNY VCGGTX260CXPB GTX 260 (nvidia video card) 6GB OCZ memory I went ahead and put windows 7 (64 bit) on the box, I'm mostly playing games with it. I've been plagued with...

I used to have windows xp. While using it my computer would occasionally freeze up for a second and then go back to normal. It usually did this about every 10-20 seconds. If I jiggled my hard drive SATA cable the problem would go away and then come back about 1 to 2 weeks later and I would just...

Hey guys, first off I want to say everyone here rocks. I just got done puting together a new computer and turned it on. It seems to post fine other then it saying no drives found. then the dvd kicks in and starts loading windows. it loads for about 20 seconds, then goes to starting windows it...

OCZ has released two new firmwares for their Vertex/Vertex EX drives (does not include TURBO) 1.4 and 1.41. Heres what I've learnt so far: 1.4 has TRIM and will suit Win 7 and any OS with TRIM support. 1.41 has GC and will suit any OS with no TRIM support or raid arrays. You can only flash...

According to a bulletin on the OCZ site; With AHCI on; my drive score went from 7.1 to 7.3, but my computer became unusable from the same symptoms quoted in the bulletin. As for my overall WPI score; it is limited to 4.4 because of the over emphasis on Aero Performance. I have not invested...

I installed an OCZ "Vertex" 60GB SSD as my C: Drive with a magnetic drive for files and backup. I now get to the Sign-on screen in 20sec. And everything launches super-quick. I like it! Only one glitch: The SSD did not like AHCI mode at all and locked-up repeatedly. I reconfigured the BIOS back...

I'm having a weird issue that I hope someone can help me with. I am running build 7100 of Windows 7 64 Bit. Yesterday I upgraded my ram from 4gb to 6gb. Now Windows will just lock up solid. (No mouse, can't ALT-Tab-Delete) It just freezes. Everything was working with no issues at all until...

Hello all, I have searched quite a bit for this problem, and usually it leads no where or people just didn't respond to others with my same problem. First here are my system specs Core i7 3.9 Ghz Foxconn Bloodrage X58 6GB OCZ 1600 triple channel PC Power and Cooling 750watt Water cooled system...

Intel I7 920 Msi X58 Platinum 6 GB OCZ triple channel memory. 700W Cooler master power supply antec 900 case. Sapphire HD4870 Graphics card Error: PAGE FAULT IN NONPAGED AREA Passed memtest fine. the error stops occuring after a while when i load games like world of warcraft :eek:'

My 7 installation is crashing to blue screen at random intervals. I haven't noticed any activity that causes it to happen more than anything else. It will crash even when it's in sleep mode. The only consistency is a BCCode 50 (page fault in non-paged memory I believe). I have a Vista...

Right-click on 'Computer' and select 'Properties' or select System from the Control Panel, it reports I have 16G of Memory. Don't I wish. I only have 2G. Task Manager as well as the CPU usage Gadget both report that correctly. Just noticed the device manager reported it incorrectly. Other than...