If it's paused, you can resume whichever operation its on with manage-bde -resume C: replace C: with the drive letter. Pause/resume work on both the encryptin and decryption process and if you do manage-bde -status it should tell you which operation it is in. If it is encrypting and you wish to remove it after then once the current operation completes run manage-bde -off C:
Hi, All you need to do is follow these steps - WORKED FOR ME!
1: Open Command Prompt in Administrator Mode
2. Enter manage-bde -off D:
Where D: is the drive letter so replace it
Note: Don't mind the error you get.
3. Enter manage-bde -on D:
Where D: is the drive letter so replace it
4. Open BitLocker Management Console
NB: You can press >Start or your windows Key
Type BitLocker and Click MANAGE BITLOCKER
5. Go to the LOCKED Drive and choose > Turn Off BitLock
6. If prompted choose YES. If password or key is prompted Enter
NB: If the drive was already encrypted and decryption was paused, Decryption will resume
This even works on Windows 10
If anything you can contact me
it worked.....thanku thanku thanku so much....Hi, All you need to do is follow these steps - WORKED FOR ME!
1: Open Command Prompt in Administrator Mode
2. Enter manage-bde -off D:
Where D: is the drive letter so replace it
Note: Don't mind the error you get.
3. Enter manage-bde -on D:
Where D: is the drive letter so replace it
4. Open BitLocker Management Console
NB: You can press >Start or your windows Key
Type BitLocker and Click MANAGE BITLOCKER
5. Go to the LOCKED Drive and choose > Turn Off BitLock
6. If prompted choose YES. If password or key is prompted Enter
NB: If the drive was already encrypted and decryption was paused, Decryption will resume
This even works on Windows 10
If anything you can contact me