Windows 7 BSOD code 1a

[Chandler Spain]

Attached is my W7F zip file, would appreciate some help

 

[kemical]

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1A, {3452, 2c38000, fffff7000108b898, ff000000ff000000}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+339a3 )

Followup: MachineOwner

Hi,
Bugcheck 1A means a severe memory management issue occurred and may mean you have failing RAM.

Windows does have a memory testing app but it can miss errors and the best app for the job is Memtest86.
If you open the link below you'll see you can run Memtest86 in two ways. You can either burn it to disk or install it onto a USB drive it's entirely up to you. You'll then need to enter the bios to change the boot order so you can boot from either the Disk or USB stick you have Memtest86 on.
You must test for at least 12 hours unless it becomes obvious there is a problem straight away (you'll see errors outlined in red.
Memtest86+ - Advanced Memory Diagnostic Tool
Please post any new dump files