Is It Possible to Receive a Corrupted Version of Windows?

Discussion in 'Windows 7 Help and Support' started by jmt83, Feb 4, 2013.

  1. jmt83

    jmt83 New Member

    May 28, 2012
    Likes Received:
    I have a question about a desktop workstation I purchased from Dell. The PC in question is a Dell OptiPlex 580 which came with an OEM installation of Windows 7 Pro x64. Please bear with the length of my post, and forgive me if I am not posting this in the correct forum. I’m not sure if there is a correct forum for this question, but here goes:

    Is it possible to purchase a bad copy of Windows?

    What exactly do I mean by “bad copy”? I’m not talking about a pirated copy with a fake license. I mean, is it possible the copy of Windows that came installed on my system is damaged, corrupt, or incomplete? All the data on the OEM disc was transferred from somewhere, from something. When the manufacturer created this disc, is it possible that something went wrong? Why do I want to know? Well, here is my story:

    About two years ago I purchased a brand new PC from Dell. I noticed within the first week or so, practically right out of the box, the PC crashed and displayed a BSOD. The PC crashed again about a week later. I was a little concerned when I saw the first crash, but the second got my attention for sure. However, every time I tried investigating an error code, the probable cause was always vague. I couldn’t find anything that pointed to that one “silver bullet” fix.

    I looked for answers everywhere, often on boards such as this one. The fixes suggested to me were numerous, well thought out, but all too often varied. “It’s the hardware! It’s the software! It’s the hard drive! It’s a third party driver! It’s Windows!” Whatever the suggestion, I tried it, but nothing worked.

    I am not a computer expert, guru, or whiz of any kind. I’m just a guy that has been able to troubleshoot or fix numerous issues over the years with the assistance of great people who contribute to forums like this one. But in regards to this particular issue, no matter what I have looked for, no matter what test I have used, I have never been able to identify the cause of these BSOD, nor have I been able to prevent them from continuing.

    Here are a few things I can tell you about this PC. I don’t have any weird/uncommon software installed (just your basic things like Office, Acrobat, etc.). I’m not overclocking anything. I’ve checked the power supply and it is fully functional. I have run more memory tests then I care to remember. I’ve scanned for malware over and over again. I have run diagnostics to check for damage on the hard drive. I’ve uninstalled and reinstalled drivers. I’ve run stress tests on the drivers trying to force a crash. I physically removed a graphics card that I thought might be the issue, never plugging it back in. I’ve opened up the PC and reseated everything. I’ve kept the insides clean. I’ve checked the temperature inside the machine. But in two years of working on this computer, I have never found a single hardware defect with this system. And not one single tweak I have made to it has kept it from crashing.

    Even when I reformatted the hard drive and did a full reinstallation of Windows, which was the recommendation of Dell’s paid software support team, the PC quickly went back to more BSOD. If someone told me they reinstalled Windows on their system but it kept crashing, I would probably assume there was a hardware issue too. But again, I have searched and searched for evidence that the hardware is broken, but cannot find anything.

    All of this makes me wonder; maybe the PC arrived with the problem. Perhaps the OS was initially installed with a bad copy of Windows? Maybe when used that same disc to reinstall the OS, I just put the same problem back into the computer.

    It has been suggested to me that I conduct a Repair Install of Windows to fix some issues I discovered. Recently I ran the “sfc/ scannow” command and received a message stating that there were corrupt sectors that could not be repaired. But I am afraid to try to fix it with the OEM CD. This is the same CD that failed to fix the issue when I did a full install. Is it possible that if I use this same disc again that I could be replacing the same corrupt system files all over again?

    I am curious to hear feedback from others. Have any of you had an experience like this one? Is it possible that the OEM CD I received is damaged? Does this ever happen? Sorry about the length of the post, but at this point, I am grasping at straws. All feedback is greatly appreciated.

  2. bassfisher6522

    bassfisher6522 Essential Member

    Aug 27, 2008
    Likes Received:
    317's very possible. It's no different, IMO, that like anything else coming off and assembly line can have a defect or bad piece every now and then.

    Now you can test your theory with an ISO of 7 (bit and OS flavor specific) from here. Just download and burn the ISO and use that to reinstall. Keep in mind that this will wipe your drive of all factory bloatware (all that trial software) and hidden partitons. Also keep in mind that the download can become corrupted to, which has happened to me on a few occasions. If the symptoms show again, then I would start looking at the mobo, as a whole or in part, being the root cause... that is after checking to make sure all hardware and cabling is firmly seated inside the case. Loose hardware, especially RAM not fully seated will cause a BSOD in a heartbeat.

    Official Windows 7 SP1 ISO from Digital River « My Digital Life

Share This Page