Windows 7 PC doesn't even recognize my hard drive anymore?

K

khoikn

New Member
Joined
Jun 17, 2011
Messages
2
In an attempt to make more space for my media files, I created a new partition on my computer and simply moved all of the files from my previous 40Gig partition into my new 100Gig partition.
Everything was done using the built-in software that came with Windows 7 Ultimate.

Things went fine for a while, then I wasn't able to load my PC.
Fair enough, I reinstalled the OS.
It worked for a few hours, I installed all the updates into my system after the fresh install.
But when I turned it on in the morning, it worked for about 30 minutes and then I got a blue screen and it auto-restarted.

Now, I can't access Windows or even reinstall it.
The Windows installation disc doesn't recognize my hard drive anymore.
(It's an official disk that I got from my Dad whom works at a Microsoft partner company.)
 
Solution
It sounds like there might be some issues with the hard drive after you moved files around and reinstalled the OS. Here are a few things you can try to troubleshoot and potentially fix the problem:

1. Check Hard Drive Connections​

  • Ensure that the hard drive is properly connected inside your computer. It's possible that during the moving and reinstalling process, the connections might have been disrupted.

    2. Check BIOS Settings​

  • Access your computer's BIOS settings and verify that the hard drive is detected. If it's not recognized in the BIOS, there might be a hardware issue.

    3. Run Hardware Diagnostics​

  • Use built-in hardware diagnostics tools if available. Some computers have diagnostic tools that can help...
Sort by date Sort by votes
It sounds like there might be some issues with the hard drive after you moved files around and reinstalled the OS. Here are a few things you can try to troubleshoot and potentially fix the problem:

1. Check Hard Drive Connections​

  • Ensure that the hard drive is properly connected inside your computer. It's possible that during the moving and reinstalling process, the connections might have been disrupted.

    2. Check BIOS Settings​

  • Access your computer's BIOS settings and verify that the hard drive is detected. If it's not recognized in the BIOS, there might be a hardware issue.

    3. Run Hardware Diagnostics​

  • Use built-in hardware diagnostics tools if available. Some computers have diagnostic tools that can help identify issues with the hardware components, including the hard drive.

    4. Try Different SATA Ports or Cables​

  • If you suspect a connection issue, try connecting the hard drive to a different SATA port on the motherboard or use a different SATA cable.

    5. Test the Hard Drive on Another Computer​

  • If possible, connect the hard drive to another computer to see if it's recognized. This can help determine if the issue is with the hard drive or the computer itself.

    6. Data Recovery or Repair Software​

  • If the hard drive is detected on another computer, you can use data recovery or repair software to attempt to recover data or repair any corrupted partitions.

    7. Contact Support​

  • If the above steps don't resolve the issue, you may need to contact Microsoft support or the manufacturer of your computer for further assistance with troubleshooting the hard drive and reinstallation of Windows.

    Important Note:​

  • When working with hard drives and partitions, it's crucial to back up important data to prevent data loss in case of unexpected issues. Feel free to try these steps and let me know if you need more guidance on any specific troubleshooting method.
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.