Windows 10 SOLVED: USB flash drive shows full when it isn't... but not when using File Explorer

This Wreckage

Well-Known Member
Joined
Dec 16, 2022
Messages
17
I download YouTube files using 4K Video Downloader on to a USB flash drive which seems to be working perfectly. Recently I have found a "Not enough disk space" error report when directly downloading to the flash drive which has plenty of space remaining, but the message does not appear if I download to my Videos library on the hard drive. I can then move the files to the flash drive without problems. What might be causing this error?
 

Hi This Wreckage,
The most likely cause is that 4K Video Downloader is checking or using the USB drive differently during the download than Windows does during a normal file copy.

Most likely reasons​

  • The app needs temporary working space
    4K Video Downloader may create a temporary file, reserve space in advance, or keep partial download chunks on the USB while it builds the final video.
    That can trigger a false “Not enough disk space” error even though the finished file will fit.
  • The USB file system may be the problem
    If the flash drive is formatted as FAT32, it has a 4 GB single-file limit.
    Some programs report that as a disk space problem instead of saying the file is too large.
  • The drive’s free-space information may be slightly wrong
    A removable drive can have:
  • file system errors
  • hidden temporary files
  • recycle bin data
  • damaged allocation tables
In that case, File Explorer may still copy files normally, but another program may misread the available space.
  • The flash drive may be starting to fail
    USB sticks sometimes still work for simple copying, but fail during continuous write activity like downloading and merging media streams.

Why copying later works​

When you download to your Videos folder first:
  • The hard drive handles all temporary files and merging.
  • The USB only receives the final completed file.
  • That avoids the extra temporary-write behavior that may be confusing 4K Video Downloader.

What to check first​

1. Check the USB format​

  • Open File Explorer.
  • Right-click the USB drive.
  • Click Properties.
  • Look at File system.
If it says FAT32, that is a strong suspect.
For large video files, exFAT is usually the better format.
Warning: Reformatting erases the drive, so back up everything first.

2. Check the drive for errors​

  • Open Command Prompt as Administrator.
  • Run:
chkdsk X: /f
  • Replace X: with the correct USB drive letter.
This repairs basic file system errors.

3. Look for hidden space usage​

  • In File Explorer, enable Hidden items.
  • Check whether the USB contains leftover temp folders or unusually large hidden files.
  • Empty the Recycle Bin while the USB is connected.

4. Try a smaller test download​

  • Download a much smaller YouTube file directly to the USB.
  • Then try a larger one.
If small files work and larger ones fail, that points to:
  • FAT32 limits
  • pre-allocation/temp-space requirements
  • drive write issues under heavy load

5. Change 4K Video Downloader settings if possible​

If the app allows a separate temporary folder, set that folder to your internal hard drive, not the USB.
Then keep the final save location on the USB if needed.
That is often the best workaround.

Best practical fix​

If the drive contains no important data or you can back it up first:
  • Copy all files off the USB.
  • Reformat it as exFAT.
  • Copy the files back.
  • Test direct downloads again.
That fixes many cases involving:
  • false free-space errors
  • FAT32 limits
  • file table corruption

If the problem continues after that​

Then I would start suspecting one of these:
  • The USB stick is unreliable or failing
  • 4K Video Downloader has a bug with removable drives
  • Security software is interfering with direct writes to the USB

My short answer​

The most probable cause is either:
  • 4K Video Downloader needs temporary space on the USB while downloading, or
  • the flash drive is formatted as FAT32 / has minor file system corruption.
Because you can download to the hard drive and then move the file successfully, the issue is probably not true lack of space, but how the downloader interacts with the USB during the download process.
If you want, I can help you narrow it down quickly if you tell me:
  • What file system the USB uses: FAT32, exFAT, or NTFS
  • The approximate size of the video files that fail
  • Whether all files fail or only larger ones
  • The exact wording of the error message from 4K Video Downloader
 

Hi This Wreckage,
The most likely cause is that 4K Video Downloader is checking or using the USB drive differently during the download than Windows does during a normal file copy.

Most likely reasons​

  1. The app needs temporary working space
    4K Video Downloader may create a temporary file, reserve space in advance, or keep partial download chunks on the USB while it builds the final video.
    That can trigger a false “Not enough disk space” error even though the finished file will fit.
  2. The USB file system may be the problem
    If the flash drive is formatted as FAT32, it has a 4 GB single-file limit.
    Some programs report that as a disk space problem instead of saying the file is too large.
  3. The drive’s free-space information may be slightly wrong
    A removable drive can have:
    • file system errors
    • hidden temporary files
    • recycle bin data
    • damaged allocation tables
    In that case, File Explorer may still copy files normally, but another program may misread the available space.
  4. The flash drive may be starting to fail
    USB sticks sometimes still work for simple copying, but fail during continuous write activity like downloading and merging media streams.

Why copying later works​

When you download to your Videos folder first:
  1. The hard drive handles all temporary files and merging.
  2. The USB only receives the final completed file.
  3. That avoids the extra temporary-write behavior that may be confusing 4K Video Downloader.

What to check first​

1. Check the USB format​

  1. Open File Explorer.
  2. Right-click the USB drive.
  3. Click Properties.
  4. Look at File system.
If it says FAT32, that is a strong suspect.
For large video files, exFAT is usually the better format.
Warning: Reformatting erases the drive, so back up everything first.

2. Check the drive for errors​

  1. Open Command Prompt as Administrator.
  2. Run:
chkdsk X: /f
  1. Replace X: with the correct USB drive letter.
This repairs basic file system errors.

3. Look for hidden space usage​

  1. In File Explorer, enable Hidden items.
  2. Check whether the USB contains leftover temp folders or unusually large hidden files.
  3. Empty the Recycle Bin while the USB is connected.

4. Try a smaller test download​

  1. Download a much smaller YouTube file directly to the USB.
  2. Then try a larger one.
If small files work and larger ones fail, that points to:
  • FAT32 limits
  • pre-allocation/temp-space requirements
  • drive write issues under heavy load

5. Change 4K Video Downloader settings if possible​

If the app allows a separate temporary folder, set that folder to your internal hard drive, not the USB.
Then keep the final save location on the USB if needed.
That is often the best workaround.

Best practical fix​

If the drive contains no important data or you can back it up first:
  1. Copy all files off the USB.
  2. Reformat it as exFAT.
  3. Copy the files back.
  4. Test direct downloads again.
That fixes many cases involving:
  • false free-space errors
  • FAT32 limits
  • file table corruption

If the problem continues after that​

Then I would start suspecting one of these:
  1. The USB stick is unreliable or failing
  2. 4K Video Downloader has a bug with removable drives
  3. Security software is interfering with direct writes to the USB

My short answer​

The most probable cause is either:
  1. 4K Video Downloader needs temporary space on the USB while downloading, or
  2. the flash drive is formatted as FAT32 / has minor file system corruption.
Because you can download to the hard drive and then move the file successfully, the issue is probably not true lack of space, but how the downloader interacts with the USB during the download process.
If you want, I can help you narrow it down quickly if you tell me:
  1. What file system the USB uses: FAT32, exFAT, or NTFS
  2. The approximate size of the video files that fail
  3. Whether all files fail or only larger ones
  4. The exact wording of the error message from 4K Video Downloader
 

Hi This Wreckage,
The most likely cause is that 4K Video Downloader is checking or using the USB drive differently during the download than Windows does during a normal file copy.

Most likely reasons​

  1. The app needs temporary working space
    4K Video Downloader may create a temporary file, reserve space in advance, or keep partial download chunks on the USB while it builds the final video.
    That can trigger a false “Not enough disk space” error even though the finished file will fit.
  2. The USB file system may be the problem
    If the flash drive is formatted as FAT32, it has a 4 GB single-file limit.
    Some programs report that as a disk space problem instead of saying the file is too large.
  3. The drive’s free-space information may be slightly wrong
    A removable drive can have:
    • file system errors
    • hidden temporary files
    • recycle bin data
    • damaged allocation tables
    In that case, File Explorer may still copy files normally, but another program may misread the available space.
  4. The flash drive may be starting to fail
    USB sticks sometimes still work for simple copying, but fail during continuous write activity like downloading and merging media streams.

Why copying later works​

When you download to your Videos folder first:
  1. The hard drive handles all temporary files and merging.
  2. The USB only receives the final completed file.
  3. That avoids the extra temporary-write behavior that may be confusing 4K Video Downloader.

What to check first​

1. Check the USB format​

  1. Open File Explorer.
  2. Right-click the USB drive.
  3. Click Properties.
  4. Look at File system.
If it says FAT32, that is a strong suspect.
For large video files, exFAT is usually the better format.
Warning: Reformatting erases the drive, so back up everything first.

2. Check the drive for errors​

  1. Open Command Prompt as Administrator.
  2. Run:
chkdsk X: /f
  1. Replace X: with the correct USB drive letter.
This repairs basic file system errors.

3. Look for hidden space usage​

  1. In File Explorer, enable Hidden items.
  2. Check whether the USB contains leftover temp folders or unusually large hidden files.
  3. Empty the Recycle Bin while the USB is connected.

4. Try a smaller test download​

  1. Download a much smaller YouTube file directly to the USB.
  2. Then try a larger one.
If small files work and larger ones fail, that points to:
  • FAT32 limits
  • pre-allocation/temp-space requirements
  • drive write issues under heavy load

5. Change 4K Video Downloader settings if possible​

If the app allows a separate temporary folder, set that folder to your internal hard drive, not the USB.
Then keep the final save location on the USB if needed.
That is often the best workaround.

Best practical fix​

If the drive contains no important data or you can back it up first:
  1. Copy all files off the USB.
  2. Reformat it as exFAT.
  3. Copy the files back.
  4. Test direct downloads again.
That fixes many cases involving:
  • false free-space errors
  • FAT32 limits
  • file table corruption

If the problem continues after that​

Then I would start suspecting one of these:
  1. The USB stick is unreliable or failing
  2. 4K Video Downloader has a bug with removable drives
  3. Security software is interfering with direct writes to the USB

My short answer​

The most probable cause is either:
  1. 4K Video Downloader needs temporary space on the USB while downloading, or
  2. the flash drive is formatted as FAT32 / has minor file system corruption.
Because you can download to the hard drive and then move the file successfully, the issue is probably not true lack of space, but how the downloader interacts with the USB during the download process.
If you want, I can help you narrow it down quickly if you tell me:
  1. What file system the USB uses: FAT32, exFAT, or NTFS
  2. The approximate size of the video files that fail
  3. Whether all files fail or only larger ones
  4. The exact wording of the error message from 4K Video Downloader
 

Back
Top