Microsoft’s definitive update: after an internal review and partner testing, the company says the August 2025 Windows 11 security rollup did not directly corrupt or “brick” SSDs — but the incident has exposed a fragile interaction between OS updates, SSD controller firmware, and real-world workloads that still leaves some users exposed and data at risk. (bleepingcomputer.com) (tomshardware.com)
Over the second half of August 2025 a cluster of alarming user reports began circulating online: users installing the August Patch Tuesday cumulative for Windows 11 (commonly tracked as KB5063878, OS build 26100.4946) experienced NVMe SSDs that would disappear from File Explorer, Device Manager and Disk Management during heavy file writes. In a subset of reproductions, files being written at the time were left incomplete or corrupted and a few drives remained inaccessible after reboot. Community testers and some enthusiast outlets replicated the phenomenon using sustained sequential writes — commonly in the tens of gigabytes — and flagged drives that were more than roughly 60% full as more likely to fail under sustained loads. (tomshardware.com)
Microsoft opened an investigation and coordinated with SSD controller vendors. After internal tests, telemetry analysis and partner-assisted lab work, Microsoft updated its Admin Center message to say it had “found no connection between the August 2025 Windows security update and the types of hard drive failures reported on social media.” At the same time, NAND controller vendor Phison ran a large validation campaign — reporting more than 4,500 cumulative testing hours and roughly 2,200 test cycles — and likewise said it could not reproduce the failures in its lab. (bleepingcomputer.com) (tomshardware.com)
That reassurance should calm fears of a mass “update bricking drives” scenario. Yet the documented community reproductions, the technical plausibility of OS/firmware interactions under heavy writes, and a handful of unrecoverable bench outcomes mean the problem is not fully closed for everyone. Users and administrators must therefore treat this as a real, narrow risk: backup first, avoid heavy sustained writes on drives that may be affected, apply firmware and vendor guidance, and report incidents through formal support channels so vendors can gather the high-quality evidence they need.
If the lesson of this event has a single, practical takeaway it is this: in a world of increasingly co‑engineered storage stacks, update discipline and verified backups are the cheapest and most reliable insurance against the rare but painful possibility that an update or underlying firmware reveals a latent hardware weakness.
Source: News18 Did A Windows 11 Update Make Your PCs SSD Storage Unusable? Microsoft Gives The Answer
Over the second half of August 2025 a cluster of alarming user reports began circulating online: users installing the August Patch Tuesday cumulative for Windows 11 (commonly tracked as KB5063878, OS build 26100.4946) experienced NVMe SSDs that would disappear from File Explorer, Device Manager and Disk Management during heavy file writes. In a subset of reproductions, files being written at the time were left incomplete or corrupted and a few drives remained inaccessible after reboot. Community testers and some enthusiast outlets replicated the phenomenon using sustained sequential writes — commonly in the tens of gigabytes — and flagged drives that were more than roughly 60% full as more likely to fail under sustained loads. (tomshardware.com)Microsoft opened an investigation and coordinated with SSD controller vendors. After internal tests, telemetry analysis and partner-assisted lab work, Microsoft updated its Admin Center message to say it had “found no connection between the August 2025 Windows security update and the types of hard drive failures reported on social media.” At the same time, NAND controller vendor Phison ran a large validation campaign — reporting more than 4,500 cumulative testing hours and roughly 2,200 test cycles — and likewise said it could not reproduce the failures in its lab. (bleepingcomputer.com) (tomshardware.com)
What users actually saw: the symptom profile
- Drives vanish mid-write: a drive can become temporarily or permanently invisible to Windows while a large sequential write is in progress. Several community reproductions show the device disappearing from Device Manager and Disk Management while still physically present.
- Partial or corrupted files: files that were being written when the device failed were often truncated or corrupted. In some cases the file system was shown as RAW. (tomshardware.com)
- Recovery varies: many drives returned after a reboot and appeared to function normally; a minority of reports described persistent inaccessibility requiring vendor tools or RMA.
- Typical trigger pattern: sustained sequential writes around ~50 GB or more, especially when the target drive was >60% used, were often reported as the reproducible workload that triggered the issue.
Microsoft’s investigation: methodology and limits
Microsoft’s published position — summarized in a service alert — rests on three pillars:- internal reproduction attempts on up‑to‑date systems,
- telemetry across the installed base for any measurable spike in drive failures or file-corruption signals, and
- coordinated testing with hardware partners (controller and SSD vendors). (bleepingcomputer.com)
- Telemetry rarely captures every failure mode — especially when a device becomes fully unresponsive or its controller stops reporting SMART data, which can make data collection incomplete.
- Community bench tests can reproduce edge-case workload profiles that differ from Microsoft’s lab workloads; absence of reproduction in Redmond’s lab does not entirely rule out a real-world interaction that requires a specific firmware/drive/host combination.
- Microsoft noted that its formal support channels had not received widespread customer complaints at the time of the advisory — most reporting was happening on forums and social media, which complicates evidence gathering and triage. (bleepingcomputer.com)
What the vendors found: Phison and the controller angle
Phison — repeatedly named in early user posts because many affected drives used Phison-based controllers — publicly summarized its validation campaign. The vendor reported:- over 4,500 hours of cumulative testing and ~2,200 test cycles on drives reportedly impacted,
- no reproducible failure modes in those tests, and
- no confirmed partner or customer reports that matched the social-media claims during the validation window. (tomshardware.com)
- the issue may be coincidental or tied to a defective component batch, thermal conditions, or other non-update-related causes; or
- the failure requires a rare combination of firmware, host firmware/BIOS settings, or a precise workload profile not present in Phison’s test fleet.
Technical analysis: how an OS update can expose controller fragility
Modern NVMe SSDs are complex systems combining NAND silicon, controller firmware, DRAM (or DRAM-less designs), and host-side features like the Host Memory Buffer (HMB). Here are the plausible mechanical failure modes that could explain the observed behavior:- Controller stall under sustained sequential writes: long, continuous writes change workload characteristics — more garbage collection, hotter die temperatures, and heavier command queues. A firmware race or unhandled edge case can cause the controller to stop responding to the host. When that occurs the drive may be invisible to the OS until the controller resets.
- HMB allocation interactions: DRAM‑less drives rely on HMB to borrow system RAM for mapping tables. Changes in how the OS allocates or permits HMB (e.g., increasing permitted HMB windows) can trigger firmware assumptions to break if controller firmware expects smaller windows or specific timing. Previous Windows updates altered HMB handling and caused BSODs on some models during past 24H2 rollouts, illustrating that host-side policy changes can cascade into firmware edge cases.
- Thermal or power-management regressions: an update that subtly changes I/O scheduling, caching, or DMA patterns could increase sustained current draw or temperature on an SSD, exposing a thermal-triggered failure that previously lay dormant. Phison’s recommendation to use heatsinks highlights this vector. (tomshardware.com)
- Loss of telemetry during faults: if the controller becomes unresponsive it may stop reporting SMART or telemetry metrics, making post‑mortem analysis harder and giving Microsoft’s telemetry an incomplete picture.
Why the “no connection” statement doesn’t mean “no risk”
Microsoft’s conclusion — that it found no connection between the August security update and the reported failures — is important and reassuring at scale. However, readers should understand what it does not imply:- It does not guarantee that no individual experienced a device failure that coincided with the update.
- It does not exclude a narrow, environment-specific interaction that replicated only under particular firmware, BIOS, thermal and workload conditions.
- It does not replace practical user precautions: backups, firmware updates, and staged updates remain necessary. (bleepingcomputer.com)
Practical guidance: how to protect your data and systems now
If you installed the August 2025 Windows updates (or are planning to), follow these pragmatic, prioritized steps to minimize risk.- Back up immediately.
- Create a verified image backup or at minimum copy irreplaceable files to an independent device or cloud storage.
- Avoid heavy sustained writes on potentially at-risk drives.
- Delay large game installs, cloning jobs, archive extraction, bulk media exports or multi‑GB copies until you confirm firmware and driver status.
- Check SSD firmware and vendor tools.
- Run your SSD vendor’s official tool (not third‑party guess‑ware) and apply any firmware updates that address stability or compatibility.
- Add thermal mitigation for high-performance NVMe drives.
- Use heatsinks or thermal pads where recommended, especially for M.2 drives without chassis cooling.
- If you experience a failure, preserve evidence.
- Do not reinitialize the drive. Collect event logs, Device Manager screenshots, and any vendor tool output. Report the issue to Microsoft Support and your SSD vendor; attach logs and exact steps that triggered the failure.
- Consider pausing Windows Update on mission‑critical machines until vendor guidance is confirmed.
- Use the built‑in “Pause updates” option, group policies, or your management tool to stage the roll-out.
- If you need to rollback a recent KB for troubleshooting, follow vendor and Microsoft guidance — but only after collecting logs and ensuring you do not overwrite evidence needed for recovery. (pcworld.com)
Recovery options if your drive vanishes or becomes RAW
- Soft steps: reboot first (many reports show temporary recovery). Run the vendor’s SSD utility to check SMART and run diagnostics.
- File-system repair: if the volume shows as RAW and the drive is recognized by the controller, use read-only imaging tools first to create a sector image, then attempt file-recovery tools on the image rather than the live drive.
- Controller-level recovery: if vendor tools cannot see the drive or SMART is unreadable, contact the SSD manufacturer’s support and avoid power-cycling repeatedly; in some cases, controlled intervention by vendor RMA or service is the safer option.
- Professional data recovery: if data is critical and the drive is unrecoverable by vendor tools, consult a professional data-recovery service that has SSD firmware-level expertise. Attempting repeated DIY fixes increases the chance of permanent data loss.
Strengths and weaknesses of the industry response
Strengths:- Rapid attention: Microsoft and major controller vendors engaged quickly, ran coordinated tests and issued public advisories. That level of cross‑industry coordination is appropriate for storage incidents. (bleepingcomputer.com)
- Thorough lab validation: Phison’s multi‑thousand-hour test campaign is significant and demonstrates due diligence. (tomshardware.com)
- Evidence gap: much of the reporting came via social platforms; formal support channels did not immediately reflect the same volume, complicating reproducibility and telemetry confirmation.
- Communication clarity: users whose drives failed want clearer, step-by-step remediation guidance and a formal known-issue entry or rollback mechanism for the storage regression if it becomes substantiated in specific device families.
- Testing coverage: lab tests can miss rare firmware/host combinations. The incident underlines the need for broader pre-release stress tests that include sustained sequential-write workloads across more controller firmware versions and host BIOS variants.
What this episode means long term for Windows users and builders
- Expect a renewed emphasis on end-to-end stress testing. OS vendors, SSD controller designers and OEMs must include longer-duration, high-throughput scenarios in pre-release validation to catch workload-dependent regressions.
- Users should maintain conservative update policies for mission-critical systems: stagger rollouts, validate on a test bench, and confirm firmware compatibility before mass deployment.
- The trend toward DRAM-less SSDs that rely on host cooperation (HMB) increases the coupling between host OS behavior and controller firmware. That co‑engineering yields cost and power benefits but also amplifies the surface area for subtle compatibility faults.
- Transparency matters: when incidents arise, more granular telemetry sharing and representative failure logs help the community and vendors converge on fixes faster.
Conclusion
Microsoft’s official finding — that the August 2025 Windows 11 security update shows no connection to the reported SSD failures at scale — is supported by its internal reproduction attempts and by vendor lab testing, including an extended Phison validation campaign. (bleepingcomputer.com) (tomshardware.com)That reassurance should calm fears of a mass “update bricking drives” scenario. Yet the documented community reproductions, the technical plausibility of OS/firmware interactions under heavy writes, and a handful of unrecoverable bench outcomes mean the problem is not fully closed for everyone. Users and administrators must therefore treat this as a real, narrow risk: backup first, avoid heavy sustained writes on drives that may be affected, apply firmware and vendor guidance, and report incidents through formal support channels so vendors can gather the high-quality evidence they need.
If the lesson of this event has a single, practical takeaway it is this: in a world of increasingly co‑engineered storage stacks, update discipline and verified backups are the cheapest and most reliable insurance against the rare but painful possibility that an update or underlying firmware reveals a latent hardware weakness.
Source: News18 Did A Windows 11 Update Make Your PCs SSD Storage Unusable? Microsoft Gives The Answer