To get the Windows 11 2026 Update, open Settings > Windows Update, select Check for updates, and choose Download & install if Windows 11, version 26H2 is offered. This guide applies to eligible PCs already running Windows 11 version 24H2 or 25H2. If the update is not offered, install available prerequisite updates, check for compatibility notices, and leave any safeguard hold in place rather than forcing the upgrade.

Microsoft released version 26H2 on September 29, 2026. As of October 28, Microsoft says it is available to all eligible devices; that does not mean every PC will be offered it immediately. A compatibility hold or an organization’s update policy can still affect an individual device.

A laptop displays Windows Update installing Windows 11 version 26H2, with progress at 64%. Check your version and prepare the PC​

Before checking for the feature update, confirm where you are starting:

  1. Select Start > Settings > System > About.
  2. Under Windows specifications, note the Edition and Version.
  3. If the version is 24H2 or 25H2, continue with the procedure below. If it already says 26H2, the 2026 Update is installed.
  4. If your PC runs an older version, use Windows Update to install the updates offered for it first. The 26H2 enablement-package procedure is documented for versions 24H2 and 25H2, not as a direct step from every older release.

Windows 11 version 26H1 is a separate release intended for certain new devices; it is not the 2026 Update described here. If your PC reports 26H1, do not assume the 24H2/25H2 enablement-package instructions apply to it.

If the PC runs Windows 10, the Windows Update path is Settings > Update & Security > Windows Update. A Windows 10 PC must first be eligible for and move to Windows 11; the 26H2 steps in this guide start once it is running an applicable Windows 11 version. Microsoft ended regular Windows 10 support on October 14, 2025.

Before installing:

  • Back up important files. A feature update normally preserves them, but a usable backup is the safest preparation if anything goes wrong.
  • Connect to the internet and plug a laptop into power.
  • Save open work and allow time for a restart. Checking may take only a few minutes, but download, installation, prerequisite updates, and restart time vary.
  • If it is a work or school PC, check with your IT department before changing update settings. Your organization may control when a feature update is offered.

For eligible 24H2 and 25H2 devices, Microsoft delivers 26H2 using a small enablement package after the necessary underlying files are present. The package requires a restart. A small package does not necessarily mean the entire process will be quick: a PC that is behind on monthly updates may need to download and install those first.

Install the 2026 Update through Windows Update​

  1. Open Start > Settings > Windows Update.
  2. If updates are paused, select Resume updates. If Windows shows a pending restart for an earlier update, save your work and restart first, then return to Windows Update.
  3. Optionally, turn on Get the latest updates as soon as they’re available. This requests earlier access to applicable non-security and feature updates. It does not override a safeguard hold or guarantee that 26H2 will appear.
    You can turn the switch off later on the same page. Switching it off does not remove updates already installed. Microsoft says regular security updates continue whether the switch is on or off.
  4. Select Check for updates. Allow the scan to finish and install applicable updates Windows offers. If Windows asks for a restart, restart and check again.
    The 26H2 enablement package requires version 24H2 or 25H2 and the applicable September 2026 prerequisite cumulative update or a later one. You do not need to identify or manually download the enablement package for this Windows Update procedure.
  5. Look for an offer for Windows 11, version 26H2. If it appears, select Download & install. You may also see See what’s in this update if you want to review the release before installing it.
  6. Let Windows download and install the update. Keep the PC powered on. When Windows indicates that a restart is needed, save your work and select Restart now, or schedule the restart for a convenient time if that option is offered.
  7. After the restart, sign in and return to Settings > Windows Update. Install any further updates offered and restart again if Windows requests it.

Do not turn off the PC while Windows is applying the update during restart. The desktop returning is useful confirmation that the restart completed, but check the version as described next before assuming the feature update succeeded.

Verify that version 26H2 is installed​

Use either of these checks:

  1. Open Settings > System > About.
  2. Under Windows specifications, check Version. A successful installation should show 26H2.

Alternatively, press Windows key + R, type winver, and press Enter. The About Windows window displays the Windows version.

You can also open Settings > Windows Update > Update history to review installed updates and check for failures. Update history is useful for troubleshooting, but the Version field is the clearer check for whether the PC is now running 26H2.

If Windows still reports 24H2 or 25H2, return to Windows Update and check whether a restart is pending, the feature update is still installing, or an error is displayed. Record any error code before trying again.

If version 26H2 is not offered​

An absent feature-update offer is not, by itself, proof that the PC is incompatible. Work through these checks in order:

  1. Confirm the starting version. Check Settings > System > About again. The documented enablement-package path applies to Windows 11 24H2 and 25H2.
  2. Install available monthly updates. In Settings > Windows Update, select Check for updates, install what is offered, and complete any requested restart. Then check once more for 26H2. A prerequisite or pending restart can prevent you from completing the feature update.
  3. Read any message on the Windows Update page. Microsoft may display a notice that an update is on its way but is not ready for the device. This can indicate a safeguard hold for a known issue; a missing offer alone does not establish that a hold exists.
  4. Check Microsoft’s Windows release health information. Search for Windows 11 version 26H2 known issues and notifications and review issues that match your hardware, driver, app, or the message on your PC. Follow a documented resolution for your specific issue, if Microsoft provides one. Otherwise, wait for the issue to be resolved and the hold to be lifted.
  5. Consider device management. On a work or school PC, an administrator may control feature-update timing or the latest-updates toggle. Ask IT whether 26H2 has been approved for the device. Do not try to change organization policy yourself.

Microsoft uses safeguard holds to prevent upgrades where a known problem could cause failures or other serious effects. When a hold is lifted, Windows Update can offer the release again, but it may not appear immediately. Keep installing the other updates offered to your current supported Windows version while you wait.

Do not use registry changes, unofficial compatibility bypasses, or installation media to force 26H2 past a safeguard hold. The purpose of this guide is to install the update when Windows Update determines the device is ready.

Troubleshoot a failed or stalled update​

Windows Update reports an error​

First, note the exact error code and which update failed. Then run Microsoft’s Windows Update troubleshooter:

  1. Open Start > Settings > System > Troubleshoot > Other troubleshooters.
  2. Find Windows Update and select Run.
  3. Follow the prompts. Restart the PC when the troubleshooter finishes.
  4. Return to Settings > Windows Update, select Check for updates, and retry any offered update.

If the error returns, open Windows Update > Update history and record the update name, error code, and date. Use those details with Microsoft Support or your organization’s help desk. The troubleshooter can repair update problems, but it cannot make an ineligible device pass a safeguard hold.

Windows says there is not enough storage​

Open File Explorer > This PC to check the free space on the Windows drive. You can also use Settings > System > Storage > Cleanup recommendations to review possible cleanup items.

Warning: Review every item before deleting it. Removing Previous Windows installation(s) can eliminate the files needed to return to an earlier Windows version; deleting personal files can cause data loss.

Choose only items you no longer need, select Clean up for the appropriate section, and then retry Windows Update. If necessary, move personal files to external storage and verify that the copies are accessible before removing the originals. Windows will tell you if it needs more space; there is no need to assume the small enablement package is the only space the update process requires.

The update appears stuck or fails after restart​

Leave the PC connected to power and give it time to finish, especially while it is applying updates during restart. If Windows returns to the desktop without completing 26H2, check Windows Update for a pending restart or error and review Update history.

If Windows reports that the installation failed, run the troubleshooter above. If the same failure repeats, keep the error details and seek support rather than repeatedly interrupting the installation or deleting update files.

Roll back if a problem starts after installation​

First, back up any important files created or changed since the update. Removing an update or returning to an earlier version can affect the PC’s security and installed software, so use rollback to address a specific problem and keep the device updated afterward.

For a PC that received 26H2 from 24H2 or 25H2 through the enablement package, the package is KB5121794. Windows support site Winhelponline reports that it can be removed from the installed-updates list when the uninstall option is available:

  1. Open Settings > Windows Update > Update history > Uninstall updates.
  2. Look for the 26H2 feature enablement entry with KB5121794. Names can vary; check the KB number rather than selecting an unrelated security update.
  3. If the entry has an Uninstall option, select it and follow the prompts.
  4. Restart if prompted, then check Settings > System > About or run winver to confirm the resulting version.

Some updates cannot be uninstalled, and the entry may not be available on every installation. Do not remove a different update as a substitute.

If Settings > System > Recovery offers Go back, that is another recovery option for eligible upgrades. Microsoft says it is generally available for only 10 days. It keeps personal files but removes apps and drivers installed after the upgrade and reverses subsequent settings changes. If neither rollback option is available, or Windows will not start, contact Microsoft Support or your IT department with the update details before attempting a reset or reinstall.