If middle click stops working in Windows 11 or Windows 10, press the scroll wheel on a normal link in two apps, then check whether your mouse software has remapped the wheel press. If the click fails across apps, the mapping is correct, and the mouse works on another PC, reinstall its device entry in Device Manager and restart Windows. If the same button fails on a second PC with its normal assignment, the mouse itself is more likely at fault. A wheel that still scrolls can have a failed click: turning the wheel and pressing it are separate inputs.

A computer mouse’s scroll wheel settings are shown being adjusted and tested on a Windows desktop. Before you change a driver​

  • Check what your mouse is designed to do. On most mice with a clickable wheel, pressing straight down sends the middle click. Some models have a separate middle button or a wheel-mode control. Use the button identified for your model rather than assuming every control near the wheel sends middle click.
  • Keep another way to control Windows. A laptop touchpad or a spare wired USB mouse is ideal. Uninstalling the affected mouse in Device Manager can temporarily stop pointer movement and left and right clicks as well. Make sure the backup works before you uninstall anything.
  • Have administrator access and save your work. The reinstall requires a restart. On a managed work or school PC, have IT handle the driver step if you can't make the change.

1. Test the middle button in more than one app​

  1. In Chrome or Firefox, open an ordinary web page with a text link. Put the pointer directly over the link and press the wheel once without rolling it. Look at the tab strip: a new tab should appear, even if the browser stays on the original page.
  2. If nothing happens, hold Ctrl and left-click the same link. If that opens a tab but pressing the wheel doesn't, you've confirmed that the link can open in a new tab. The keyboard shortcut is a comparison, not a test of the middle button.
  3. Repeat the middle-click test in a second app. If you already have both Chrome and Firefox, use the same link in each. You can also use an app with a known middle-button action: in Blender with its default controls, holding the middle button and dragging in the 3D Viewport rotates the view.
  4. Note whether the press does nothing, performs the wrong action, or registers only sometimes. If it works reliably in one app, Windows is receiving the button input in that app. Check the failing app's bindings or mouse profile before touching the driver. If only one website fails, try ordinary links on another site before changing any settings.

In Firefox, a failed autoscroll test alone doesn't establish that the button is broken. Middle-clicking a blank part of a page starts autoscroll only if Use autoscrolling is enabled. The link test doesn't rely on that setting.

2. Restore the wheel press in your mouse software​

  1. Open the configuration utility that supports your exact mouse model, if you use one. Select the mouse and find the physical wheel press in the button layout. Don't change the wheel's scroll speed, tilt actions, or ratchet mode while testing the click.
  2. Note the existing assignment so you can restore it. Set that one control back to the normal Middle button action or restore its factory assignment if your model uses middle click by default. In Logitech Options, for example, select the mouse, open the Mouse tab, select the wheel control, and assign Middle button. In Logitech G HUB, select the relevant profile and mouse, open Assignments, select the wheel button's assignment, and choose USE DEFAULT, not DISABLE.
  3. Check the desktop profile and the profile for the app where the click fails. In a utility that switches profiles by app, fixing the desktop assignment may leave the app's assignment unchanged. If your mouse uses an onboard profile, check what's saved to the active slot too. Logitech documents that supported G HUB devices can store profiles on the mouse, so closing the utility or moving the mouse to another PC doesn't necessarily clear the remap.
  4. Bring each test app back to the foreground and repeat the link or app test. If the normal action returns, stop here. If a test change wasn't useful, restore the assignment you noted rather than resetting the whole profile.

If you don't use a mouse utility or remapping tool, skip this step. The standard Windows Mouse page can swap the primary left and right buttons and change scrolling behavior; it isn't where you restore a vendor's wheel-button assignment.

3. Check whether the problem follows the mouse​

  1. For a wired mouse or one with a USB receiver, unplug the cable or receiver, wait about 10 seconds, then plug it directly into a different USB port on the PC, bypassing any dock or hub. For a Bluetooth mouse, turn the mouse off and back on. If it's battery-powered, recharge it or try fresh batteries as appropriate.
  2. Test again. If the mouse also stops moving or loses left and right clicks, work on the connection first. If only the middle press fails and the wheel feels sticky, switch the mouse off or unplug it and follow the manufacturer's cleaning guidance around the wheel.
  3. If you have another PC, try the affected mouse there with its normal button assignment and any driver required for that model. If you have a spare mouse with a known-working middle button, try that mouse on the original PC using the same app test.

If the original mouse misses the same clicks on both PCs but the spare works, suspect the original mouse, not Windows. If the original clicks normally elsewhere, or both mice fail in multiple apps on the original PC, continue with the driver check. If you don't have a second PC or mouse, you can still proceed, but a failed reinstall won't by itself prove the button is broken.

4. Refresh the mouse in Device Manager​

The Device Manager procedure is the same in Windows 11 and Windows 10. This refresh lets Windows detect the mouse again and can reinstall the same driver. It doesn't remove the vendor utility or reset a saved button profile.

  1. Right-click Start, select Device Manager, and expand Mice and other pointing devices.
  2. Identify the affected mouse. A generic name such as HID-compliant mouse doesn't tell you which physical device it is. With your backup pointer available, disconnect the affected USB mouse or its receiver and watch which entry disappears; reconnect it and check which entry returns. If you can't positively identify the entry, stop rather than uninstalling every item in the category.
  3. If the issue began immediately after a mouse driver update, right-click the identified mouse and open Properties > Driver > Roll Back Driver first. Choose a reason, select Yes, and restart if prompted. Retest. If Roll Back Driver is unavailable, skip it rather than downloading an older driver from an unofficial site.
  4. Before uninstalling, save your work, close your apps, and switch to the backup pointer. Right-click only the affected mouse and select Uninstall device. If the confirmation offers a checkbox to remove the driver software or package, leave it unchecked. Select Uninstall.
  5. Select Start > Power > Restart. After signing back in, keep the mouse connected or reconnect it. Windows attempts to reinstall the device. If it doesn't return, use your backup pointer to open Device Manager > Action > Scan for hardware changes.

Verify the repair and handle remaining failures​

  1. Confirm that the original mouse moves the pointer, left- and right-clicks, and scrolls. Then repeat the middle-click test several times at normal pressure in the two apps you used earlier. For the browser test, each press on the link should open one tab.
  2. If you use automatic profile switching, bring the originally affected app back to the foreground and test again. A successful click on the desktop followed by failure in one app is a reason to revisit that app's profile or binding, not to repeat the driver reinstall.
  • The mouse still isn't detected or Device Manager shows a warning. Right-click the mouse entry and check Properties > General > Device status. Note any error code. If the entry is present, you can try Update driver > Search automatically for drivers. For optional drivers, Windows 11 uses Settings > Windows Update > Advanced options > Optional updates. On Windows 10, go to Settings > Update & Security > Windows Update, select Check for updates, then View optional updates if it appears. Install only an update that matches your device, then restart. If the manufacturer requires a separate driver, get it from that manufacturer's support site for your exact model and Windows version.
  • Only Firefox fails. Try the same link in Firefox Troubleshoot Mode. From the menu, open Help or Help and Report, select Troubleshoot Mode…, then Restart. Choose Open, not Refresh Firefox. If middle click works there, investigate Firefox add-ons or other settings temporarily disabled by that mode. Exit Firefox and reopen it normally to leave the mode.
  • The click still sticks, skips, or fires twice on another PC. Once you've confirmed the normal assignment on both PCs, those symptoms point to the physical button or switch. Contact the mouse maker for warranty or repair options. If multiple known-good mice fail only on the original PC, give IT or PC support the apps tested, the connection type, and any Device Manager error code.