Windows 7 Pausing Your Boot Process

Adamsappleone · Apr 22, 2010

On some newer systems (even home built), the function key message for entering Setup (or any other message) disappears before you get a chance to read it and some monitors are slow to display text when powering up the system, so you may have to reboot to read it again.

So, during the boot process, what ever message you want read when it comes up, PRESS the Pause/Break Key and when your done, PRESS Enter to resume the Boot Process.

Comes in handy if you have a fast boot process.

pcs3657 · May 25, 2010

You could use the "Pause/Break" key though. Just tap that to stop the screen, and press another key to continue; Repeat as necessary.

Adamsappleone · May 25, 2010

pcs3657 said:
You could use the "Pause/Break" key though. Just tap that to stop the screen, and press another key to continue; Repeat as necessary.

Did you read my post thoroughly?

So, during the boot process, what ever message you want read when it comes up, PRESS the Pause/Break Key and when your done, PRESS Enter to resume the Boot Process.
Comes in handy if you have a fast boot process.

Regards,

Don

Mike · May 28, 2010

This seems to be a major annoyance on Gigabyte motherboards.

Search

Windows 7 Pausing Your Boot Process

pcs3657

New Member

Adamsappleone

U.S.Navy D.A.V.

Mike

Windows Forum Admin