The checks below run from least risky to most risky, so go through them in order.
What the black screen with a cursor usually means
Microsoft's blank-screen troubleshooting guide covers both Windows 11 and Windows 10. It groups blank screens by when they appear and what's on screen:
- Black screen with a movable cursor: often a stalled Windows process or a driver problem.
- Black screen at sign-in: may come from a display output setting or a corrupted user profile.
- Black screen after an update: often linked to an incompatible driver or an update that didn't finish.
- Black screen with a blinking text cursor: a different problem. Microsoft says this happens when the UEFI or BIOS can't find a boot device. It's a storage or boot-order issue, not a desktop issue.
Before you change anything, write down when the screen went black: before sign-in, right after sign-in, or during or after an update. Keep the PC plugged in. Don't interrupt a visible update or a reset just because the screen goes dark. Microsoft's reset documentation warns that during a reset the screen may stay black for a long time, occasionally more than 15 minutes, and the device may restart itself. Restarting it manually during that process can make the reset fail.
Summary: The type of cursor and when the screen went black tell you which checks to run.
Step 1: Rule out the display connection
These checks are quick, so do them first:
- Make sure the device is plugged in or charged. If you use an external monitor, check that it's on and set to the correct input.
- Check that the HDMI, DisplayPort or VGA cables are seated firmly.
- On a laptop, unplug external displays, docks and other peripherals, then check the built-in screen.
- If you can, swap in a cable or monitor you know works. Change one thing at a time so you can tell which change fixed it.
If the Windows sign-in screen or security screen appears, the display hardware can show an interface. Focus on what happens after sign-in instead of buying a new monitor.
Step 2: Try the keyboard shortcuts
Windows has two shortcuts that work even when nothing is visible:
- Windows + Ctrl + Shift + B resets the graphics driver. Microsoft says you should hear a beep or see the screen flicker if it worked.
- Windows + P opens the display mode list. Microsoft suggests pressing Windows + P, pressing P again to move through the options (PC screen only, Duplicate, Extend), and pressing Enter to apply. This helps when Windows is sending the picture to a monitor that's switched off or disconnected.
Summary: Two shortcuts, no risk. If nothing changes, move on.
Step 3: Restart Windows Explorer
This is the main fix for the cursor-only black screen. The desktop, taskbar and Start menu all run in one process, Windows Explorer. When it stalls or crashes, you're left with a black screen and a working pointer.
- Press Ctrl + Alt + Delete. If the security screen appears, choose Task Manager. You can also try Ctrl + Shift + Esc.
- Find Windows Explorer in the process list, right-click it and choose Restart.
- If Windows Explorer isn't listed, Microsoft says to go to File > Run new task, type
explorer.exe, and press Enter. Where Run new task appears depends on your Task Manager layout, so look around if it isn't under File.
What success looks like: the taskbar and desktop come back.
Gizmo Times adds a sensible warning: only use this step to start the desktop. Don't paste repair commands from a script you can't verify into that Run box.
If the desktop comes back, save your work and back up important files before you change anything else. Write down any driver, app or Windows update installed just before the problem started. Getting the desktop back doesn't mean the cause is gone. It gives you a chance to collect information.
When Explorer keeps dying: look at the logs
If the problem keeps returning, Event Viewer can show what's crashing. Answers on Microsoft's Q&A forum suggest opening Windows Logs > Application and looking for Event ID 1000 around the time of the black screen, especially for explorer.exe or userinit.exe crashes. If a faulting module from a third-party app appears there, you have your main suspect.
Step 4: Restart normally if you can
If the security screen or Start menu works, save what you can and use a normal restart. Then check whether the problem comes back for the same user account. If it only affects one account, a corrupted profile becomes more likely, which matches Microsoft's list of sign-in causes. Don't keep holding the power button while Windows still offers a normal restart.
If nothing responds at all, Microsoft's basic steps include a forced restart: hold the power button for about 20 seconds. That will lose any unsaved work. If the drive holds the only copy of important files, get help before you try anything that could reinstall or erase Windows. Your manufacturer's recovery instructions for your specific model are also worth checking.
Step 5: Find your BitLocker recovery key first
Do this before you open Windows Recovery Environment (WinRE). On encrypted devices, Microsoft says you need the BitLocker recovery key for some recovery tools, including Startup Repair and System Restore.
According to Microsoft's recovery-key documentation:
- The key is a 48-digit number.
- When Windows asks for it, write down the first 8 digits of the recovery key ID. That tells you which key to use if you have more than one.
- The key may be stored in the Microsoft account used to set up the device or turn on BitLocker. That could be someone else's account if another person set up the PC.
- On Windows 11 version 24H2 and later, the BitLocker recovery screen shows a hint of which Microsoft account holds the key.
- On work or school devices, the key may be in the organization's account. You may be able to see it under your devices, or you may need to ask IT.
- It may also be on a printout or a USB flash drive.
- Microsoft Support can't retrieve, provide or recreate a lost key. If you can't find it and can't undo whatever triggered the request, Microsoft says you'll have to reset the device, which removes all your files.
Treat the key like a password and never post it in a support forum thread.
Step 6: Enter WinRE and Safe Mode
Microsoft documents several ways into WinRE:
- From the sign-in screen: hold Shift while you select Power > Restart.
- From Settings, if you can reach it: System > Recovery, then Restart now next to Advanced startup.
- Automatic Repair: turn the PC on, hold the power button to shut it down when the Windows logo appears, do this twice, and Windows should show the Automatic Repair screen on the third start. Then select Advanced options.
- Recovery drive or installation media: boot from it and choose Repair my PC.
To get to Safe Mode from WinRE, go to Troubleshoot > Advanced options > Startup Settings > Restart. Microsoft's blank-screen guide uses F5 to start in Safe Mode with Networking. Pick whichever option your Startup Settings screen lists.
Safe Mode helps you diagnose the problem, but it won't fix it on its own. Microsoft Q&A answers point out that if the black screen issue does not occur in Safe Mode, it might indicate that a third-party application or driver is causing the problem. From there, the suggested next step is a clean boot, which starts Windows with a minimal set of drivers and startup programs. You then turn items back on in groups until the black screen returns.
Summary: Find the BitLocker key, get into WinRE, and use Safe Mode to narrow down the cause.
Step 7: Pick a repair that matches the cause
| What you found | Sensible next step | What it changes |
|---|---|---|
| Safe Mode works; problem started after a graphics driver change | Your PC or GPU maker's supported driver or rollback instructions. Microsoft's guide also describes Device Manager > Display adapters > Roll back driver | Only the display driver |
| Windows won't start at all | Startup Repair: Troubleshoot > Advanced options > Startup Repair > Restart | Tries to fix boot problems |
| Problem started after a recent system change, and a restore point exists | System Restore: Troubleshoot > Advanced options > System Restore | System files, registry, installed programs |
| Nothing else worked; data is backed up | Reset this PC | Reinstalls Windows |
A few notes for each option:
- Driver rollback: don't uninstall drivers just because they appear in Device Manager. Remove the one you have evidence against.
- Startup Repair: Microsoft says it looks for missing or damaged system files, corrupted boot configuration data, a damaged master boot record, incompatible drivers and registry errors. If it can't fix the problem, it shows a report. It's meant for a PC that won't start. It isn't the right first move when Explorer has simply stalled.
- System Restore: Microsoft says it rolls back system files, registry settings and installed programs without touching personal files. It also removes programs and changes made after the restore point. Use Scan for affected programs before you click Finish.
- Reset this PC: Microsoft is clear that a reset reinstalls Windows. Keep my files removes apps and settings. Remove everything removes personal files as well. It does far more than restart the desktop, so use it last.
Some guides suggest disabling services or editing the Winlogon registry key early on. Some Microsoft Q&A answers do suggest checking the Winlogon Shell value from a working session such as Safe Mode, but registry edits carry real risk. Leave them until Explorer restarts, Safe Mode and clean boot have failed to explain the problem.
Analysis: diagnose before you repair
The approach here is to identify the cause first and match the fix to it. Many black-screen guides go straight to reinstalling Windows or editing the registry. The Explorer restart takes about thirty seconds, and the BitLocker key check can save you from losing data. Neither carries much risk.
The checklist has limits. It doesn't cover update rollback through WinRE's Uninstall Updates option. It also doesn't cover the Event Viewer and clean-boot checks above, which are useful when the problem keeps coming back. And neither the guide nor Microsoft gives a safe waiting time for an update that looks stuck, beyond the 15-minute figure Microsoft gives for resets. Use judgment there and give it time.
Windows 10 users should note that Microsoft's own pages say Windows 10 support ended on October 14, 2025. The same troubleshooting steps still apply, but a black screen caused by a driver on an unpatched system won't get a fix through Windows Update.
Quick checklist
- Note when the screen went black, and don't interrupt an update or reset in progress.
- Check power, cables and inputs. On a laptop, unplug docks and external displays.
- Press Windows + Ctrl + Shift + B, then try Windows + P.
- Press Ctrl + Alt + Delete, open Task Manager, and restart Windows Explorer or run
explorer.exe. - Save your work, back up files, and write down any recent changes.
- Find your BitLocker recovery key before entering WinRE.
- Use Shift + Restart to reach WinRE and Safe Mode.
- Roll back the driver, run Startup Repair or use System Restore depending on what you found.
- Use Reset this PC only after your data is safe.
References
- Windows 11 black screen with a cursor: Try these recovery checks - Gizmo Times Gizmo Times · 2026-11-17T12:30:09+00:00
- Windows 11 - Black screen after login (mouse cursor only) - Microsoft Q&A learn.microsoft.com
- Black screen with cursor problem after feb windows 11 patch - Microsoft Q&A learn.microsoft.com