The headline numbers come from one lab, one drive and one test bench. Tom's Hardware reviewed the same drive on the same day and reached a more mixed conclusion.
What the drive is
Tom's Hardware's sample was a single-port, 15mm U.2 drive with part number XP208H0815T3P3216T310. TweakTown's listing is the same number with extra suffixes. The key specs from TweakTown:
- Capacity and form factor: 15.36TB, U.2.
- Interface: PCIe Gen5 x4. It can also run in a 2x2 dual-port mode for high-availability server designs.
- Controller and NAND: Phison's in-house 16-channel X2 controller (PS5302-X2) with SK hynix V9 eTLC. The review describes this as 321-layer 3D TLC.
- Endurance: 1 DWPD, 28,032 TBW and a five-year limited warranty.
- Power: a 25W envelope.
- Price: MSRP is listed as "NA", and the review's value score is N/A. Ignore the unrelated consumer SSD price widgets on the page.
TweakTown says the X201 family replaces the X200. The X201P is the 1-DWPD version, and the X201E is the 3-DWPD version.
Generation-over-generation gain
Phison says the main change from the X200 is faster TLC NAND. Phison's own blog cites write speeds of up to 8.7 GB/s on the X200P and 12.0 GB/s on the X201P. That is a rated maximum increase of roughly 38%. It is not a promise of 38% more speed in every workload.
TweakTown's results
TweakTown tests on a Linux platform. The test system was an Intel Xeon w7-2495X on an ASUS Pro WS W790E-SAGE SE board, running Ubuntu 24.04.1 LTS. Each test starts with a secure erase and two full sequential-write passes. Random tests then add two preconditioning fills, followed by five-minute measurements at each queue depth after a 30-second ramp-up.
| Test | Rated spec | TweakTown measured |
|---|---|---|
| 128K sequential write | Up to 12,000 MB/s | About 11,900 MB/s steady state at QD256, near 12,000 MB/s from QD2 to QD1024 |
| 128K sequential read | Up to 14,900 MB/s | Up to 15,024 MB/s at QD32 |
| 4K random write | Up to 600K IOPS | About 630K at QD256, peak 634,641 at QD4096 |
| 4K random read | Up to 3.3M IOPS | About 3.29M, with 48.7 µs latency at the start of the sweep |
| 8K random write | Not stated | About 310K IOPS steady state |
Other findings from the review:
- Sequential writes: The drive reached steady state after one full-drive fill. The reviewer called its QD1 sequential-write result among the best he had seen. It also had the lowest QD1024 write latency of the drives compared.
- 4K reads: The drive led the comparison group from QD1 to QD32, which is where many real servers operate.
- Mixed 4K workloads: At 70/30 it reached about 1.25 million IOPS, which TweakTown ranked second best on its chart. At 50/50 it levelled off near 913,000 IOPS, with only the Micron 9650 Pro higher.
- 8K database-style mix: At 70/30 it reached about 625,000 IOPS and showed low latency at shallow queue depths. TweakTown called it an excellent choice for database applications.
- Weak spot: Pure 8K random reads were middle of the pack. Strong write results do not mean the drive wins every category.
TweakTown scored it 92% for performance and 95% overall, and gave it an Editor's Choice award. It listed no cons. That is the reviewer's verdict and not independent certification.
A second opinion
Tom's Hardware found the drive meets its rated specs, with 12 GB/s sequential writes and a steady 600K random write IOPS. It also found challenges with QD1 writes, log commits and the middle of its mixed sweeps. It rated the drive 4 out of 5.
That sits awkwardly beside TweakTown's praise for QD1 sequential writes. The two sites measured different things. TweakTown's QD1 praise is for 128K sequential writes, while Tom's Hardware's concern is small-block QD1 writes and log commits. If your workload is a transaction log or a latency-sensitive database, test those patterns yourself.
Reading the numbers
- Family versus SKU figures: Phison's family-level marketing cites up to 3300K/1050K read/write IOPS. TweakTown rates this 15.36TB model at 600K random writes. Don't carry the 1,050K figure over to this drive.
- High queue depths: Results at QD1024 or QD4096 show what the drive can do under extreme load. They don't describe a typical file server or virtualization host.
- DWPD: 1 DWPD means the drive is rated to absorb its full capacity in writes each day over the warranty period. For this model that works out to the quoted 28,032 TBW over five years. Check Phison's terms before turning that into a daily write budget.
- Windows Server: The compatibility list is a vendor claim. It names no specific Windows Server version. The review did not test on Windows, and it doesn't cover desktop Windows editions.
Deployment considerations
This is a U.2 drive, so it needs a U.2 bay and backplane that can carry PCIe 5.0 NVMe. It is not a consumer M.2 upgrade.
Before buying, confirm:
- Your server vendor supports the drive.
- The platform can run PCIe Gen5 at full speed to the bays.
- The chassis airflow can handle a 25W drive.
Tom's Hardware reported the drive ran warm in its testing, which is a reason to check cooling. TweakTown's photo shows the drive under a finned heatsink on an open test bench. Neither review validates a specific server.
Bottom line
On this evidence, the X201P is a strong choice for write-heavy jobs such as AI checkpoints, data ingest and bulk loads. TweakTown found top-tier sequential writes and robust random writes for a 1-DWPD drive. Tom's Hardware found weaker QD1 writes and mixed-workload middle ranges. Pricing is unknown, so value can't be judged yet.
Treat TweakTown's "record" claims as applying to its own test bench and comparison set. They are not an industry-wide record.
References
- Phison Pascari X201P 15.36TB SSD Review - 1-DWPD Programming Speed Champion - TweakTown TweakTown · 2026-11-17T13:00:11+00:00
- Phison Pascari X201P 15.36TB SSD Review — Fast PCIe 5.0 write performance for AI and ingest servers tomshardware.com
- SC25: Phison Accelerates AI Workloads with Expanded Infrastructure Portfolio – PHISON Electronics Corp. phison.com