What an exit node does
Tailscale normally acts as an overlay network. You can route all your public internet traffic by setting a device on your network as an exit node, then configuring other devices to send traffic through it. When you do, you're effectively using default routes (0.0.0.0/0, ::/0), similar to a typical VPN.
In the author's setup, the exit node is a home-lab Windows PC that stays online. A laptop or phone on the office Wi-Fi selects that PC as its exit node. Sites then see the home connection's public IP address. The author's reasoning is that anything blocked on the office network becomes reachable if it is reachable from home.
The setup steps on Windows
The author says the whole thing takes a few minutes and needs no config files. Tailscale's current documentation, as relayed by a recent third-party guide, gives these Windows steps:
- Prerequisites. You need a configured tailnet. Both the exit node and the client devices must run Tailscale v1.20 or later.
- Advertise the PC. On the home PC, open the Tailscale client and choose Exit node > Run exit node.
- Approve it. The step is easy to miss. Toggling the option in the app is not enough, which matches the author's warning. You then approve the machine in the admin console. That means the Machines page, where the device menu has an option under Edit exit node called Use as exit node.
- Select it on the client. Select Use exit node and pick the machine. Choose None to stop. That menu only appears once an approved exit node is available. Each client must make this selection separately.
- Check your IP (optional). Tailscale suggests checking your public IP address with an online tool. The exit node's public address should show instead of your local one.
If you still need local printers or other LAN devices while the exit node is active, Tailscale offers an Allow local network access setting. By default, a device connected to an exit node won't have access to its local network.
Keeping a Windows exit node reachable
The author keeps the home PC awake and enables Unattended Access. Tailscale's documentation says Windows exit nodes are a weaker gateway than Linux ones. Routing is userspace only, the PC must not sleep, and each in-flight DNS query occupies a system thread, which can hurt on a busy node.
- Unattended mode. Turn on Run unattended: right-click the tray icon, then Preferences > Run unattended. Tailscale's page says this is available on Windows 10 or later and Windows Server 2016 or later. It also notes that the Windows account that enables it owns the device's Tailscale configuration.
- Sleep. Tailscale says you need to prevent the computer from sleeping if you want the exit node to stay available.
- Key expiry. New tailnets default to a 180-day key expiry, after which a node stops working until it reauthenticates. A node with an expired key will fail closed. Disabling expiry fixes that. Tailscale warns that this leaves the device connected until you revoke it, so do it only for trusted machines.
- Access policy. By default, any user in your tailnet can use a configured exit node. A customized access policy can change that. If the policy never grants access to
autogroup:internet, clients can't route internet traffic through the node. Granting access to the exit node device itself only permits connections to it, such as SSH.
Is it really free?
The author says Tailscale's free plan makes the whole thing free. That is mostly true, with a qualifier. Tailscale's pricing page lists a Personal plan at $0, with unlimited user devices and up to 6 users. The same page says the plan is for non-commercial use. It also says a tailnet created with a custom domain is treated as business use and starts with a 14-day Enterprise trial.
So "no VPN subscription" holds for a genuinely personal tailnet. It is not a blanket promise for work deployments. Tailscale also sells exit-node-style privacy through a separate paid Mullvad add-on. That is a different product from a home exit node.
Speed: one author's numbers
The author reports these figures:
- Office Wi-Fi measured 73 Mbps down without the exit node and 23 Mbps with it.
- A home connection of about 200 Mbps capped the speed, even though the office link is 1 Gbps.
These are single-setup observations. They don't include test conditions, upload results or repeated runs. Treat them as an illustration of the principle. Your throughput can't exceed what the home connection and the path between the two devices allow. A Windows userspace exit node can add overhead, which is Tailscale's own stated limitation.
What this does not give you
The author is candid that this isn't a privacy tool. Traffic still exits through your home IP and ISP, and you don't get geo-unblocking unless the exit node is in another country.
Be careful with the idea that the office only sees encrypted traffic. Encrypting the tunnel hides the contents of your traffic. It doesn't hide that a tunnel exists. A network's controls may still detect or block it. Whether this works depends entirely on that network. That is my analysis from general networking knowledge, not a claim from the source.
The policy question
The source treats the workaround as a clever trick and never says whether the author had permission. A university or employer network may have acceptable-use rules that cover tunnels. Circumventing a block could break those rules, and some organizations treat it as a disciplinary matter.
Sensible options if a block is hurting your work:
- Ask IT. Request an exception for the specific site. Many restrictions have a clear business reason, and some can be lifted.
- Use approved remote access. If your organization provides a VPN or remote-access service, use that.
- Keep Tailscale to its intended uses. Reaching your own home lab, media server or NAS from anywhere is the common case. It carries little policy risk.
Bottom line
For a home user, the Windows exit-node workflow is quick: advertise the PC, approve it in the admin console, then select it on each device. Don't skip the approval step. Don't let the PC sleep. Watch for key expiry and for access policies that omit internet routing. The "free" claim covers personal, non-commercial use only. The 73-to-23 Mbps drop is one author's result, not a benchmark. The question of whether you're allowed to use it on a given office network is yours to answer before you try.
References
- Tailscale gave me a way around my office network limits without a VPN subscription MakeUseOf · 2026-10-24T13:30:18+00:00
- Exit nodes (route all traffic) · Tailscale Docs tailscale.com
- Keep Tailscale running when I'm not logged in to my computer · Tailscale Docs tailscale.com