ddr3

Started getting parts for my new PC So far I have 1.AMD Ryzen 5800X 2 ÀSUS TUF Gaming X570 Pro Wi-Fi 3.G_Skill Trident Z Neo DDR3 3600 64GBs 4.Lian-Li ST120 càse fans 9 total Still left aré 2 1tb m.2 ssd's, a hdd, a RTX 3080or RX6800 XT,a 1440 P144hz monitor, LogitechZ906speakers, a 1000 watt...

hello guys,i need yall help,please help me i have old pc with this spec: intel core i7 6700 motherboard biostar h170 t ram kingstone hyperX 2x4 ddr3 GTX 1070 HOF 1tb hard drive normally,i got 50-80 fps when i played game like valorant,nfs heat,or FIFA,but i have some issue with my old cpu,in...

So I bought a cheap $600 PC from a guy about 1 year ago. I had to replace the sound and graphics cards with parts from a friend cause they broke about 8 months ago but it has been working like a charm ever since. Now, he’s given me 2 RAM sticks because he’s upgrading. My existing RAM was...

Hello everyone, I have been having issues with my computer that I have not been able to diagnose or solve and I was wondering if I could get some help. Every 20 seconds or so the CPU usage jumps about 20-30% and it causes my computer to go through a pretty nasty lag spike. This problem has...

I installed a second stick of DDR3 1x8gb in my system. I opened up task manager and it detects 16gb of ram, but it only shows 8gb in use. Link Removed Is this normal, or do I have to allow my computer to use all 16gb? Thank you

Hi, I've been using 2 Patriot Viper Xtreme 8GB PC3-12800 1600MHZ sticks and am in the need to upgrade as I do more video editing and Gaming than before. Any suggestions that will give me the most bang for my buck and supports my M5A99FX PRO R2.0? Specs| M5A99FX PRO R2.0, AMD Radeon r9 270, 2...

I uses a 32 bit windows.7 . I swap the original single 2gb 1066 mhz to a single 4gb 1600 mhz ram stick (both are ddr3) . but after it is installed , the computer restarted automactically after the "starting windows" pops up . but if i put back the original ram with the new once , it cqn actually...

So recently I had to get new hardware for my rig. My old motherboard sadly died so new processor, new motherboard. Switched from a AMD Phenom II X6 1055T to a Intel Core i5 4460 and only had an issue due to my motherboard using AHCI and my setup was for IDE but no blue screens after I changed my...

I checked my rams with memtest86. But it found nothing. I uploaded CPU-Z tabs Rammon: RAMMon v1.0 Build: 1015 built with SysInfo v1.0 Build: 1097 PassMark (R) Software Memory Summary For FRAUDA Number of Memory Devices: 2 Total Physical Memory: 8088 MB (8192 MB) Total Available Physical...

I am thinking about upgrading my mobo with some more/other DDR3 RAM modules. In former times there were heavy differences in quality between different manufacturers. Do these quality differences still exists or are they meanwhile on an almost same level (because it has become a mature...

:andwhat:

I have a system that's acting strange. It's a new mobo, cpu, ddr3 & psu. It has a HD 5850 GPU & has been working great but over the last few weeks it's been randomly going blank. I could have the pc system on & then all of a sudden I get a black screen. No mouse cursor, no response from any...

Motherboard - GIGABYTE GA-Z68MA-D2H-B3 LGA 1155 Intel Z68 HDMI SATA 6Gb/s USB 3.0 Micro ATX Intel Motherboard RAM - CORSAIR Vengeance 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model CMZ8GX3M2A1600C9B CPU - Intel Core i5-2500K Sandy Bridge 3.3GHz (3.7GHz Turbo Boost)...

Hey all, I'm ready to build my first system. Primarily for gaming (FSX, Battlefield mostly). Obviously want a 4th gen Intel Core i7 (unless someone can convince me all I need is an i5) and it has to be unlocked to OC for FSX. I'm hoping for an NVidia GPU (again unless some convinces me that a...

Need help choosing Graphics Card Time for another PC build. I have the following components (listed below) ordered from Newegg for my new build. I need advice on getting the best graphics card for my needs. I am NOT a gamer. I currently have (3) monitors on my main PC, and this new build...

My computer is turned on five minutes and I get the BSOD :mad: Page_fault_in_nonpaged _Area 0x50. The specs: Motherboard: DZ77sl-50k Cpu: Intel core i5 3470 Ram: Single ddr3 8GB in slot #2 Video: Nvidia GF GTX 550ti 1gb Link Removed Please help thanks.

Hey everybody, Thanks for viewing this page. before I send my laptop to Acer for repairs, I would like to consult with you guys, ok so, it was yesterday when I found out that my laptop is missing 4GB of RAM out of 8GB (4GBx2). So I checked both RAM cards, and switched their places, confirmed...

1 T71-173401 Lenovo G770 1037-2VU Laptop Computer - Intel Core i5-2430M 2.40GHz, 6GB DDR3, 750GB HDD, DVDRW, 17.3" Display, Windows 7 Home Premium 64-bit, The above system will not complete an upgrade from Windows 7 Home Premium to Windows 8 Pro. It does all of the correct things to complete...

Hello, I've recently upgraded the CPU, motherboard, and RAM for my computer, and today I was looking at CPU-Z and I noticed that the DRAM Frequency is saying 668.9 MHz. The RAM I bought is DDR3 1866, so the frequency should be around 933 MHz or so if I'm not mistaken, so why is it so low? RAM...

I have 4gb ddr3 memory . Ive checked the new pretty task manager from Win8 and I saw upp to 30% memory usage without runing any app besides task manager ofc. I want to ask if is this normal ? Ive took some screenshots for most of the entire taks manager window showing apps , background...